Ioana-Monica Pop-Calimanu

Dr. Ioana-Monica Pop-Calimanu

POLITEHNICA University Timisoara
+1
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 January 2019 in Energies
Verified
Journal Article
Open access
PDF file
IPIoana-Monica Pop-Calimanu
Ioana-Monica Pop-Calimanu
Septimiu  LicaSeptimiu Lica
Septimiu Lica
SPSorin Popescu
Sorin Popescu
Dan Florentin LascuDan Florentin Lascu
Dan Florentin Lascu
ILIoan Lie
Ioan Lie
RMRadu Mirsu
Radu Mirsu
A new hybrid step-up converter suitable in applications where large conversion ratios are needed is presented. The topology is still simple, containing only one transistor and three diodes. A detailed dc and ac analysis is performed and all design equations are provided. Compared to other topologies of the same type, the proposed converter exhibits lower or equal current and voltage stresses. A state space model is provided including the conduction losses and based on it the audio susceptibility and the control to output function are derived. As the converter is still of second order with the control to output transfer function exhibiting a right half plane zero, controller design is practically the same like in a Boost topology. It is shown how the proposed converter can be used in a photovoltaic system for performing the maximum power point tracking algorithm using the perturb and observe method. All theoretical considerations are verified through simulation and finally validated by practical experiments.

5 June 2020 in Sensors
Verified
Journal Article
Open access
PDF file
RMRadu Mirsu
Radu Mirsu
GSGeorgiana Simion
Georgiana Simion
CCCătălin - Daniel Căleanu
Cătălin - Daniel Căleanu
IPIoana-Monica Pop-Calimanu
Ioana-Monica Pop-Calimanu
Gesture recognition is an intensively researched area for several reasons. One of the most important reasons is because of this technology’s numerous application in various domains (e.g., robotics, games, medicine, automotive, etc.) Additionally, the introduction of three-dimensional (3D) image acquisition techniques (e.g., stereovision, projected-light, time-of-flight, etc.) overcomes the limitations of traditional two-dimensional (2D) approaches. Combined with the larger availability of 3D sensors (e.g., Microsoft Kinect, Intel RealSense, photonic mixer device (PMD), CamCube, etc.), recent interest in this domain has sparked. Moreover, in many computer vision tasks, the traditional statistic top approaches were outperformed by deep neural network-based solutions. In view of these considerations, we proposed a deep neural network solution by employing PointNet architecture for the problem of hand gesture recognition using depth data produced by a time of flight (ToF) sensor. We created a custom hand gesture dataset, then proposed a multistage hand segmentation by designing filtering, clustering, and finding the hand in the volume of interest and hand-forearm segmentation. For comparison purpose, two equivalent datasets were tested: a 3D point cloud dataset and a 2D image dataset, both obtained from the same stream. Besides the advantages of the 3D technology, the accuracy of the 3D method using PointNet is proven to outperform the 2D method in all circumstances, even the 2D method that employs a deep neural network.

24 December 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
IPIoana-Monica Pop-Calimanu
Ioana-Monica Pop-Calimanu
SPSorin Popescu
Sorin Popescu
Dan Florentin LascuDan Florentin Lascu
Dan Florentin Lascu
In this paper, a new hybrid SEPIC dc-dc converter with coupled inductors suitable for photovoltaic applications is presented. First, the way how the new topology was derived will be presented, continuing with its analysis and design equation as a standalone dc-dc topology. The analysis will consist of a steady-state equations derivation, a static conversion ratio calculation based on which the semiconductor voltage and current stresses are evaluated, leading to the continuous conduction mode (CCM) operation conditions. The converter will then be simulated as a first validation of the theory using the dedicated Caspoc power electronics package. To finally validate the theoretical design, a prototype will be built in order to practically demonstrate the feasibility of the proposed solution and to reveal its main practical features and limitations. A comparative study to several other similar topologies will be carried out to identify its most desirable features. Finally, an application of the new hybrid converter will consist of a complete solar energy conversion system using a photovoltaic panel. The maximum power point tracking (MPPT) algorithm will be elaborated. The solar system together with the MPPT will first be modeled, then simulated and practically implemented and tested.

30 April 2014 in International Journal of Photoenergy
Verified
Journal Article
Open access
PDF file
IPIoana-Monica Pop-Calimanu
Ioana-Monica Pop-Calimanu
FRFolker Renken
Folker Renken
A new multiphase hybrid boost converter, with wide conversion ratio as a solution for photovoltaic energy system, is presented in this paper. To ensure that all the phases of the converter operate at the same switching frequency we use interleaving topology. The proposed converter can be used as an interface between the PV system and the DC load/inverter. This multiphase converter has the advantage of reduced value and physical size of the input and output capacitor as well as the effort for the inductors. To validate the operation of the converter we provide the analyses and the simulation results of the converter.

18 December 2020 in Electronics
Verified
Journal Article
Open access
PDF file
IPIoana-Monica Pop-Calimanu
Ioana-Monica Pop-Calimanu
MBMaria Balint
Maria Balint
Dan Florentin LascuDan Florentin Lascu
Dan Florentin Lascu
This paper proposes a new hybrid Ćuk-type converter employing two inductors built on the same core which can be successfully used in applications requiring an output voltage considering higher than the input one. With few components added, in the proposed converter the static conversion ratio can be easily extended becoming wider compared to the classical Ćuk topology. At the same duty cycle range the output voltage is higher than in the classical Ćuk converter. The output voltage remains with negative polarity and with a reduced ripple. An advantage of the new converter is given by its two degrees of freedom. A DC and AC analysis is carried out, device stresses are evaluated and a comparative analysis of the proposed hybrid Ćuk topology to other indirect converters has also been performed. All the equations necessary for designing the converter are provided. The simulations performed together with the practical experiments carried out, all results confirm that the theoretical considerations are correct and validate the features that the proposed converter can provide a higher static conversion ratio without operating at high duty cycles.

1 August 2018
Verified
Conference Paper
Closed access
FRFolker Renken
Folker Renken
WSWensong Shen
Wensong Shen
USUdo Schurmann
Udo Schurmann
IPIoana-Monica Pop-Calimanu
Ioana-Monica Pop-Calimanu
As part of the EU project SWARM, a fleet of fuel cell vehicles is built. In these contexts, a DC/DC converter will be developed, which will be placed between battery and fuel cell in the powertrain of these vehicles. A multiphase buck converter is selected, in order to reach the power of the fuel cell system and to reduce the filter effort. The filter circuit with different converter phase numbers is calculated. A practical realization of a six-phase buck converter is described. Measurements of phase current balancing and efficiency curves are shown. Then, a test bench is presented, in which the converter can be proven at real (driving) conditions. In this way, the best operation strategy of the converter for use in fuel cell vehicles can be found.