Wetland water is an alternative water resource around wetland areas. However, it is typically saline due to seawater intrusion and contains high natural organic matter (NOM) that is challenging to treat. This study evaluated the stability of interlayer-free mesoporous silica matrix membranes employing a dual acid–base catalyzed sol–gel process for treatment of saline wetland water. The silica sols were prepared under a low silanol concentration, dip-coated in 4 layers, and calcined using the rapid thermal processing method. The membrane performance was initially evaluated through pervaporation under various temperatures (25–60 °C) using various feeds. Next, the long-term stability (up to 400 h) of wetland saline water desalination was evaluated. Results show that the water flux increased at higher temperatures up to 6.9 and 6.5 kg·m−2·h−1 at the highest temperature of 60 °C for the seawater and the wetland saline water feeds, respectively. The long-term stability demonstrated a stable performance without flux and rejection decline up to 170 h operation, beyond which slow declines in water flux and rejection were observed due to fouling by NOM and membrane wetting. The overall findings suggest that an interlayer-free mesoporous silica membrane offers excellent performance and high salt rejection (80–99%) for wetland saline water treatments.
1 December 2020 in IOP Conference Series: Materials Science and Engineering
Nypa palm (Nypa fruticans) is a type of palm-shaped mangrove. A nypa leaf contains 28.9% cellulose so that it is possible to produce an activated carbon applied for heavy metal removal in the solution. Thus, this study aimed to remove Fe and Mn in the FeCl3 and MnCl2 solution using the activated carbon produced from nypa leaves. In the experimental procedure, 5 grams activated carbon from nypa leaves (the particles that could pass through 40, 80, and 120 mesh size and retained on the sizes of 50, 100, and 150 mesh) were added and undergone in a batch system (for 60 and 120 minutes). The concentrations of Fe and Mn in the solution were investigated using the Atomic Absorption Spectrophotometer (AAS). The results showed that there were significant decreases in the Fe and Mn concentrations at the 60-minutes contact time with 150 mesh particle size (the absorption capacity values of Fe and Mn were 59.96 and 96.94 wt.%, respectively). This was due to the bigger surface area of the adsorbent and the longer contact time resulting in better interaction between the activated carbon from nypa leaves to remove Fe and Mn concentrations in the solution.
Carbon source as a template derived from nypa leaf powder enable to strengthen the silica matrix applied for water desalination. This research aims to synthesiz
20 January 2025 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
In this work, Synthesis of polysulfone (PSf) hydrophilic ultrafiltration membrane was prepared by addiction of Peat Clay (PC) as additive via phase inversion method. The polysulfone dope solution was loading by varied calcined peat clay composition, namely 0, 2, 4, and 6 wt%. Therefore, this study aims to study the influence of peat clay on the morphology and efficiency of the modified membranes studied. The prepared peat clay particles and membranes are all characterized by various physicochemical techniques such as Water Contact Angle (WCA), porosity, water absorption, FTIR, XRF, SEM, water flux. The characterization analysis on peat clay used in this study showed a higher value of silica components of 64.4492 wt%. The experimental results showed that the modified membrane showed high hydrophilicity the contact angle of water from 96.31° to 55.97°. The ability of water absorption increased to 42.71%, and membrane porosity increased from 23.66% to 45.63%. Whereas in SEM in the PSf membrane with the addition of peat clay, the top layer is solid with a higher thickness than without the addition of peat clay. The characteristics of the membrane show that the functional group in the addition of peat clay in the absorption of Si-OH and Si-O-Si, but there is a decrease in pure water flux (up to 3.61 kg.m-2.h-1) compared to pure membranes. Based on the results obtained, PSf-Peat Clay hollow fibre membrane shows potential as an innovative water reclamation technology.