The absorption of light in the near-infrared region of the electromagnetic spectrum by Au-hyperdoped Si has been observed. While silicon photodetectors in this range are currently being produced, their efficiency is low. Here, using the nanosecond and picosecond laser hyperdoping of thin amorphous Si films, their compositional (energy-dispersion X-ray spectroscopy), chemical (X-ray photoelectron spectroscopy), structural (Raman spectroscopy) and IR spectroscopic characterization, we comparatively demonstrated a few promising regimes of laser-based silicon hyperdoping with gold. Our results indicate that the optimal efficiency of impurity-hyperdoped Si materials has yet to be achieved, and we discuss these opportunities in light of our results.
Light-trapping structures formed on surfaces of various materials have attracted much attention in recent years due to their important role in many applications of science and technology. This article discusses various methods for manufacturing light-trapping “black” silicon, namely laser, chemical and hybrid chemical/laser ones. In addition to the widely explored laser texturing and chemical etching methods, we develop a hybrid chemical/laser texturing method, consisting in laser post-texturing of pyramidal structures obtained after chemical etching. After laser treatments the surface morphology was represented by a chaotic relief of microcones, while after chemical treatment it acquired a chaotic pyramidal relief. Moreover, laser texturing of preliminarily chemically microtextured silicon wafers is shown to take five-fold less time compared to bare flat silicon. In this case, the chemically/laser-treated samples exhibit average total reflectance in the spectral range of 250–1100 nm lower by 7–10% than after the purely chemical treatment.
Hyperspectral imaging is currently under active development as a method for remote sensing, environmental monitoring and biomedical diagnostics. The development of hyperspectral sensors is aimed at their miniaturization and reducing the cost of components for the purpose of the widespread use of such devices on unmanned aerial vehicles and satellites. In this review, we present a broad overview of recent work on the development of hyperspectral devices’ configurations, studies aimed at modifying sensors and the possibility of reducing the cost of components of such devices. In addition, we will present the main trends in the development of hyperspectral device configurations for ubiquitous applications.
24 August 2024 in Materials Science in Semiconductor Processing
The development of planar integrated systems using silicon as the main material for the near-infrared spectral region is an important area of research due to its favourable properties, such as high compatibility with existing CMOS semiconductor technology and economic efficiency. However, the indirect bandgap of silicon (Eg = 1.12 eV) poses difficulties for efficient inter-band emission, requiring innovative approaches to the integration of light-emitting devices on silicon platforms. One of the main strategies to overcome the limitations of silicon for light emission consists of heterogeneous integration methods, including the use of quantum cascade structures and narrow-gap semiconductors, as well as non-linear light generation. However, these methods are often associated with serious drawbacks, such as fabrication complexity and integration problems, which can hinder the achievement of scalability and reliability. This paper presents a comprehensive review of existing approaches for homogeneous integration of light sources on a silicon platform. Future research should focus on optimising these integration methods to maximise the potential of silicon in the near-infrared spectrum.