Two-terminal, non-volatile memory devices are the fundamental building blocks of memory-storage devices to store the required information, but their lack of flexibility limits their potential for biological applications. After the discovery of two-dimensional (2D) materials, flexible memory devices are easy to build, because of their flexible nature. Here, we report on our flexible resistive-switching devices, composed of a bilayer tin-oxide/tungsten-ditelluride (SnO2/WTe2) heterostructure sandwiched between Ag (top) and Au (bottom) metal electrodes over a flexible PET substrate. The Ag/SnO2/WTe2/Au flexible devices exhibited highly stable resistive switching along with an excellent retention time. Triggering the device from a high-resistance state (HRS) to a low-resistance state (LRS) is attributed to Ag filament formation because of its diffusion. The conductive filament begins its development from the anode to the cathode, contrary to the formal electrochemical metallization theory. The bilayer structure of SnO2/WTe2 improved the endurance of the devices and reduced the switching voltage by up to 0.2 V compared to the single SnO2 stacked devices. These flexible and low-power-consumption features may lead to the construction of a wearable memory device for data-storage purposes.
Organic nonvolatile memory devices have a vital role for the next generation of electrical memory units, due to their large scalability and low-cost fabrication techniques. Here, we show bipolar resistive switching based on an Ag/ZnO/P3HT-PCBM/ITO device in which P3HT-PCBM acts as an organic heterojunction with inorganic ZnO protective layer. The prepared memory device has consistent DC endurance (500 cycles), retention properties (104 s), high ON/OFF ratio (105), and environmental stability. The observation of bipolar resistive switching is attributed to creation and rupture of the Ag filament. In addition, our conductive bridge random access memory (CBRAM) device has adequate regulation of the current compliance leads to multilevel resistive switching of a high data density storage.
In this study, the dominant role of the top electrode is presented for Nb2O5-based devices to demonstrate either the resistive switching or threshold characteristics. These Nb2O5-based devices may exhibit different characteristics depending on the selection of electrode. The use of the inert electrode (Au) initiates resistive switching characteristics in the Au/Nb2O5/Pt device. Alternatively, threshold characteristics are induced by using reactive electrodes (W and Nb). The X-ray photoelectron spectroscopy analysis confirms the presence of oxide layers of WOy and NbOx at interfaces for W and Nb as top electrodes. However, no interface layer between the top electrode and active layer is detected in X-ray photoelectron spectroscopy for Au as the top electrode. Moreover, the dominant phase is Nb2O5 for Au and NbO2 for W and Nb. The threshold characteristics are attributed to the reduction of Nb2O5 phase to NbO2 due to the interfacial oxide layer formation between the reactive top electrode and Nb2O5. Additionally, reliability tests for both resistive switching and threshold characteristics are also performed to confirm switching stabilities.