This article reviews the main methodologies employed for the optimal location, sizing, and operation of Distributed Generators (DGs) and Energy Storage Systems (ESSs) in electrical networks. For such purpose, we first analyzed the devices that comprise a microgrid (MG) in an environment with Distributed Energy Resources (DERs) and their modes of operation. Following that, we examined the planning and operation of each DER considered in this study (DGs and ESSs). Finally, we addressed the joint integration of DGs and ESSs into MGs. From this literature review, we were able to identify both the objective functions and constraints that are most commonly used to formulate the problem of the optimal integration and operation of DGs and ESSs in MGs. Moreover, this review allowed us to identify the methodologies that have been employed for such integration, as well as the current needs in the field. With this information, the purpose is to develop new mathematical formulations and approaches for the optimal integration and operation of DERs into MGs that provide financial and operational benefits.
10 January 2022 in IEEE Latin America Transactions
This document presents the implementation of a con- tinuous population genetic optimization algorithm (CGA) as a solution method to the parameter estimation problem of a diode model (SDM) of a photovoltaic panel (PV) from experimental data of voltage versus current (V-I). The parameters to be estimated by means of the CGA are: the photoinduced current, the diode saturation current, the ideality factor, the series resistance and the parallel resistance. The estimation of the SDM parameters is carried out in order to obtain the real values that represent the power profile of the panel and thus carry out an analysis of its physical state. For which, the mean square error of the PV current estimated by the solution method from the selected parameters is used as the objective function, with the real curve of the PV panel used as the test scenario. All of the above subject to the set of restrictions that limits the problem under analysis. To validate the effectiveness and robustness of the proposed method, in this document two comparison methods have been used: the particle swarm optimization method (PSO) and a traditional genetic algorithm (GAT). In addition, four different panel types were used to generate the test scenarios: the MSX60, the SOLAR SJ65, the KYOCERA KC200GT, and the STP245S. All simulations were obtained using MATLAB 2019b. The results obtained in this document show that the proposed method presents the best relationship between the estimation of parameters and the computation time required to solve the SDM problem.
Due to the the lack of information about parameters in the datasheets of photovoltaic (PV) panels, it is difficult to study their modeling because PV behavior is based on voltage–current (V-I) data, which present a highly nonlinear relationship. To solve this difficulty, this study presents a mathematical three-diode model of a PV panel that includes multiple unknown parameters: photoinduced current, saturation currents of the three diodes, three ideality factors, serial resistance, and parallel resistance. These parameters should be estimated in the three-diode model of a PV panel to obtain the actual values that represent the voltage–current profile or the voltage–power profile (because of its visual simplicity) of the PV panel under analysis. In order to solve this problem, this paper proposes a new application of the salp swarm algorithm (SSA) to estimate the parameters of a three-diode model of a PV panel. Two test scenarios were implemented with two different PV panels, i.e., Kyocera and Solarex , which generate different power levels and are widely used for commercial purposes. The results of the simulations were obtained using different irradiance levels. The proposed PV model was evaluated based on the experimental results of the PV modules analyzed in this paper. The efficiency of the optimization technique proposed here, i.e., SSA, was measured by a fair comparison between its numerical results and those of other optimization techniques tuned to obtain the best response in terms of the objective function.