Leakage in water distribution systems (WDS) is a major problem that results in substantial resource wastage. Pressure management, which is based on optimized control strategies using pressure-reducing valve installation, is considered one of the most effective methods for controlling network leakage and can be broadly classified into varied types, depending on the different control strategies. When facing diverse operational conditions in actual engineering, selecting the most suitable optimization strategy for the specific water supply network can greatly control leakage and efficiently utilize water resources. This article employs a greedy algorithm to iteratively determine the control sequence for pressure-reducing valves (PRVs), with the objective of minimizing surplus pressure. Subsequently, it proposed five evaluation indicators, namely, daily flow, daily leakage, pressure imbalance indicator, median daily pressure at nodes, and water age, which are used to evaluate and compare pressure management strategies in two sample networks. Finally, a suitable control strategy was successfully developed and implemented for an actual WDS of Y city in southern China, resulting in significant achievements. In conclusion, this paper embodies our attempt and contemplation in formulating pressure management strategies under diverse operating conditions in WDS, with the objective of providing guidance for practical engineering applications.
The development of many intelligent technologies, such as artificial intelligence and the Internet of Things, has brought new opportunities for water industry intelligence. Based on intelligent pressure regulation technology, this paper built an intelligent management platform, designed an intelligent pressure-regulating device, and combined both to form an intelligent pressure-regulating vehicle (IPRV). The IPRV has the functions of developing a pressure-regulating scheme, equipment selection, pressure reduction potential analysis, etc. It can bring convenience to the field test of the water supply network. In the field test, an intelligent pressure-regulating device was used to obtain the network data in the pilot site called S-cell. After utilizing the intelligent management platform to analyze the measured data, the water usage pattern and pressure reduction potential of the S-cell were obtained, and an optimal pressure-regulating strategy was formulated. The water pressure at the critical node always met the water demand at the critical node during the field test. In addition, no complaints were received from other users. The results show that the IPRV is not only convenient for utility managers to make decisions on building pressure-reducing stations, but also meets user needs, realizing a win–win situation for both users and companies.
As a common method to control leakage of water distribution system, pressure management has the advantages of reducing energy consumption, reducing the possibility of explosion and avoiding the aggravation of leakage. In recent years, with the popularization of plastic pipe in the world, it is necessary to study its leakage characteristic. Our research group carried out leakage experiments on high density polyethylene (HDPE) pipe, and found that the correlation curve between leakage flow and pressure did not completely coincide in the phase of pressure boost and pressure reduction. The existing FAVAD and exponential leakage models could not explain this phenomenon, which challenges the pressure management theory dominated by a single depressing-pressure process, thus it’s necessary to explore pressure management strategies suitable for plastic pipes. Based on the viscoelastic properties of plastic pipe, we established the viscoelastic leakage model and proposed the leakage control method of drop-restore pressure, and verified its feasibility in practical engineering case. The main research objectives of this paper will be firstly to describe the strain response of leakage area in the process of continuous stress application with the Boltzmann superposition principle for HDPE pipe; the Voigt-Kelvin model is used to simulate the creep behavior of viscoelastic material, and a suitable leakage model for viscoelastic pipe is proposed to provide accurate expression of the leakage under the regulation of drop-restore pressure. Secondly, the viscoelastic pipe leakage model is embedded into the pressure-driven analysis model based on non-iterative method, and the pressure-driven viscoelastic leakage model is obtained. Finally, evaluating the proposed leakage model in the practical case. With the minimum of leakage flow as the objective function, the leakage control model of drop-restore pressure is established and solved by particle swarm optimization algorithm to obtain the accurate pressure regulation scheme. After applying the scheme from the optimization, the leakage rate decreases from 37.7% to 16.8% on weekday, which is great impact on leakage control.
The paper aims to investigate the dispersion law and mechanism of total iron from dead-end metal branch pipe to main pipe under the impact of hydraulic disturbance. A full scale experimental water distribution network including a transport main pipe as well as six dead-end branch was set up and computational-fluid-dynamics (CFD) simulation are adopted to study the dispersion phenomenon. The cavity flow theory is adopted to clarify the inner dispersion mechanism. Firstly, the CFD model is examined through the comparison of results between the two experimental methods under the same condition. Secondly, performing the effect of the Reynolds number in main pipe on the total dispersion concentration of iron. Thirdly, the characteristics of interaction between flow field and the inner mechanism linked to streamline map and concentration distribution map are analysed based on the concept of cavity flow. The future research content is briefly proposed.