The use of fossil resources for electricity production is one of the primary reasons for increasing greenhouse emissions and is a non-renewable resource. Therefore, the electricity generation by wind and solar resources have had greater applicability in recent years. Hybrid Renewable Energy Systems (HRES) integrates renewable sources and storage systems, increasing the reliability of generators. For the sizing of HRES, Artificial Intelligence (AI) methods such as Genetic Algorithms (GA) and Particle Swarm Optimization (PSO) stand out. This article presents the sizing of an HRES for the Colombian context, taking into account the energy consumption by three typical demands, four types of wind turbines, three types of solar panels, and a storage system for the system configuration. Two optimization approaches were set-up with both optimization strategies (i.e., GA and PSO). The first one implies the minimization of the Loss Power Supply Probability (LPSP). In contrast, the second one concerns adding the Total Annual Cost (TAC) or the Levelized Cost of Energy (LCOE) to the objective function. Results obtained show that HRES can supply the energy demand, where the PSO method gives configurations that are more adjusted to the considered electricity demands.
Small Wind Turbines (SWTs) are promissory for distributed generation using renewable energy sources; however, their deployment in a broad sense requires to address topics related to their cost-efficiency. This paper aims to survey recent developments about SWTs holistically, focusing on multidisciplinary aspects such as wind resource assessment, rotor aerodynamics, rotor manufacturing, control systems, and hybrid micro-grid integration. Wind resource produces inputs for the rotor’s aerodynamic design that, in turn, defines a blade shape that needs to be achieved by a manufacturing technique while ensuring structural integrity. A control system may account for the rotor’s aerodynamic performance interacting with an ever-varying wind resource. At the end, the concept of integration with other renewable source is justified, according to the inherent variability of wind generation. Several commercially available SWTs are compared to study how some of the previously mentioned aspects impact performance and Cost of Electricity (CoE). Understanding these topics in the whole view may permit to identify both tendencies and unexplored topics to continue expanding SWTs market.
The use of non-renewable energy resources is one of the main drivers of climate change. In response, the United Nations established the seventh Sustainable Development Goal, “Affordable and clean energy”, which promotes the transition toward renewable and environmentally friendly sources such as wind and solar energy. However, the intermittent nature of these resources poses challenges for maintaining a stable, continuous power supply, highlighting the need for hybrid technology approaches, such as Hybrid Renewable Energy Systems (HRES), which integrate complementary renewable sources with energy storage. In this context, this study applies a Particle Swarm Optimisation (PSO)-based approach to determine the optimal sizing and operating strategy for a hybrid system comprising photovoltaic, wind, battery storage, and diesel backup units under various synthetic load profiles. The results indicate that diesel-assisted configurations achieve lower levelized costs of energy (0.23–0.35 USD/kWh) and maintain high reliability (LPSP < 0.25%), although at the expense of higher fuel consumption and CO2 emissions. Conversely, fully renewable configurations present higher energy costs (0.29–0.44 USD/kWh), but reduce annual CO2 emissions by up to 50% and create more employment opportunities, particularly in regions with abundant wind resources such as La Guajira, Colombia.
Different isolated systems with conventional generation sources are installed in Non-Interconnected Areas (ZNI) in Colombia while off-grid renewable systems are a trending answer for the energy supply in these regions. The complementarity between different energy sources, a storage system and adequate control can substantially improve the reliability of isolated generation systems. In this context, the sizing of a Hybrid Renewable Energy System (HRES) by means of a Genetic Algorithm (GA) is presented, considering the wind and solar resources specific to a representative rural location in Colombia. The methodology involves power curves for small wind turbines and the model for photovoltaic solar panels. The preliminary output consists of a weighted distribution for each technology, either wind or conventional photovoltaics, and is constrained by the Loss of Power Supply Probability (LPSP) and the Levelized Cost Of Electricity (LCOE). A second step consists of the optimization of the installed area for photovoltaic generation, considering a Concentrated Photovoltaic (CPV) system and aiming to maintain the initial fraction of generation for this resource. Finally, an analysis is performed on the reduction of area for solar generation to the increase in costs derived from the use of concentrators and other penalties associated with this technology.
Small-scale wind turbines (SWTs) represent a promising solution for the energy transition and the decentralization of electricity generation in non-interconnected areas. Conventional strategies to improve SWT performance often rely on active pitch control, which, while effective at rated conditions, is too costly and complex for small systems. An alternative is passive pitch control through bend–twist coupling in the blade structure, which enables self-regulation and improved power generation. This work proposes a novel blade design methodology for a 5 kW SWT that integrates passive bend–twist coupling with conventional pitch adjustment, thereby creating a hybrid passive–active control strategy. The methodology encompasses the definition of aerodynamic blade geometry, laminate optimization via genetic algorithms combined with finite element analysis, and experimental characterization of composite materials. Aerodynamic–structural interactions are studied using one-way fluid–structure simulations, with responses analyzed through the blade element momentum method to assess turbine performance. The results indicate that the proposed design enhances power generation by about 4%. The study’s originality lies in integrating optimization, structural tailoring, and material testing, offering one of the first demonstrations of combined passive–active pitch control in SWTs, and providing a cost-effective route to improve efficiency and reliability in decentralized renewable energy systems.
Due to the environment’s adverse effects caused by electricity generation based on fossil resources, renewable energies have been promoted, where wind and solar