Lignosulfonates are bio-based surfactants and specialty chemicals, which are generated by breaking the near-infinite lignin network during sulfite pulping of wood. Due to their amphiphilic nature, lignosulfonates are used in manifold applications such as plasticizer, dispersant, and stabilizer formulations. Function and performance are determined by their behavior in aqueous solution and at surfaces and interfaces, which is in turn imposed by the chemical make-up. This review hence summarizes the efforts made into delineating the physicochemical properties of lignosulfonates, while also relating to their composition and structure. Lignosulfonates are randomly branched polyelectrolytes with abundant sulfonate and carboxylic acid groups to ensure water-solubility. In aqueous solution, their conformation, colloidal state, and adsorption at surfaces or interfaces can be affected by a range of parameters, such as pH, concentration of other electrolytes, temperature, and the presence of organic solvents. These parameters may also affect the adsorption behavior, which reportedly follows Langmuir isotherm and pseudo second-order kinetics. The relative hydrophobicity, as determined by hydrophobic interaction chromatography, is an indicator that can help to relate composition and behavior of lignosulfonates. More hydrophobic materials have been found to exhibit a lower charge density. This may improve dispersion stabilization, but it can also be disadvantageous if an electrokinetic charge needs to be introduced at solid surfaces or if precipitation due to salting out is an issue. In addition, the monolignol composition, molecular weight distribution, and chemical modification may affect the physicochemical behavior of lignosulfonates. In conclusion, the properties of lignosulfonates can be tailored by controlling aspects such as the production parameters, fractionation, and by subsequent modification. Recent developments have spawned a magnitude of products and technologies, which is also reflected in the wide variety of possible application areas.

Lignin can be modified and used in functional surfaces, films, and coatings.

In this article, we explored solvents with lower harmfulness than established systems for UV spectrophotometry of lignin. By measuring the absorptivity in DMSO solvent at 280 nm, the purity of the lignin samples was addressed and compared with Klason and acid-soluble lignin. The general trend was an increasing absorptivity with increasing lignin purity; however, considerable scattering was observed around the sample mean. The Hansen solubility parameter (HSP) of four technical lignins was furthermore determined. The model was in line with the UV measurements, as solvents closer in HSP correlated with a higher absorptivity. Ethylene glycol was identified as a good solvent for lignin with low UV-cutoff. In addition, mixtures of propylene carbonate, water, and ethanol showed good suitability and a low cutoff of 215 nm. While DMSO itself was poorly suited for recording alkali spectra, blending DMSO with water showed great potential. Comparing three methods for determining phenolic hydroxyl units by UV spectrophotometry showed some discrepancies between different procedures and solvents. It appeared that the calibrations established with lignin model compounds may not be fully representative of the lignin macromolecule. More importantly, the ionization difference spectra were highly affected by the solvent of choice, even when using what are considered "good" solvents. At last, a statistical comparison was made to identify the most suitable solvent and method, and the solvent systems were critically discussed. We thus conclude that several solvents were identified, which are less harmful than established systems, and that the solubility of lignin in these is a crucial point to address when conducting UV spectrophotometry.

The characterization and quantification of functional groups in technical lignins are among the chief obstacles of the utilization of this highly abundant biopolymer. Although several techniques were developed for this purpose, there is still a need for quick, cost-efficient, and reliable quantification methods for lignin. In this paper, three sampling techniques for fourier transform infrared (FTIR) spectroscopy were assessed both qualitatively and quantitatively, delineating how these affected the resultant spectra. The attenuated total reflectance (ATR) of neat powders and DMSO-d6 solutions, as well as transmission FTIR using the KBr pelleting method (0.5 wt%), were investigated and compared for eight lignin samples. The ATR of neat lignins provided a quick and easy method, but the signal-to-noise ratios in the afforded spectra were limited. The ATR of the DMSO-d6 solutions was highly concentration dependent, but at a 30 wt%, acceptable signal-to-noise ratios were obtained, allowing for the lignins to be studied in the dissolved state. The KBr pelleting method gave a significant improvement in the smoothness and resolution of the resultant spectra compared to the ATR techniques. Subsequently, the content of phenolic OH groups was calculated from each FTIR mode, and the best correlation was seen between the transmission mode using KBr pellets and the ATR of the neat samples (R² = 0.9995). Using the titration measurements, the total OH and the phenolic OH group content of the lignin samples were determined as well. These results were then compared to the FTIR results, which revealed an under-estimation of the phenolic OH groups from the non-aqueous potentiometric titration, which was likely due to the differences in the pK_a between the lignin and the calibration standard 4-hydroxybenzoic acid. Further, a clear correlation was found between the lower $M_n$ and the increased phenolic OH group content via SEC analyses. The work outlined in this paper give complementary views on the characterization and quantification of technical lignin samples via FTIR.