The primary goal of this research was to study transmission loss and absorption of fluted PVC panels using experimental and theoretical methods. During these studies, the link between panel size, thickness, transmission loss, and absorption was considered. We measured the transmission loss and absorption in reverberation rooms according to ISO standards. Hansen’s theoretical model was also used to predict the transmission loss. Agreement between TL prediction according to Hansen’s model and measured results for some of the studied panels were observed. However, the analytical prediction, according to Hansen’s model, for heavy fluted PVC panels must be used with caution. The absorption properties of the studied fluted PVC panels are also connected with their resonance, and, in addition, the resonance frequency is associated with the space between the ribs and wave propagation in the panel’s plane.
This study investigates the acoustic and aerodynamic performance of cylindrical silencers incorporating uniform and sequential mixed-perforation liners under grazing-flow conditions. Five uniform perforated panels with hole diameters ranging from 0.4 to 5 mm and four mixed configurations (0.4/1, 0.6/1, 0.8/1, and 1/5 mm) were analysed. The mixed silencers consisted of two consecutive 450 mm sections. Acoustic performance was experimentally evaluated in the 100–10,000 Hz frequency range at flow velocities of 4, 8, and 12 m/s, including insertion loss, flow-generated noise, and pressure loss. The experimental analysis was complemented by the Maa impedance model and the flow-dependent Rao–Munjal model. Impedance contrast ratios were additionally introduced to characterise differences between consecutive sections of the mixed liners. Maximum insertion-loss values of 35.5–41.0 dB were observed around 2000 Hz. Neither theoretical model exhibited a corresponding characteristic feature around 2000–2500 Hz, indicating that the attenuation maximum cannot be attributed to perforation impedance alone. The results demonstrate that perforation geometry primarily controls local resistive and reactive behaviour, whereas maximum attenuation results from the combined acoustic response of the perforated liner, porous backing, silencer geometry, and wave-propagation conditions. Sequential perforation therefore provides an additional design parameter for tailoring silencer performance without increasing its overall dimensions.
1 July 2022 in IOP Conference Series: Materials Science and Engineering
Authors present a study on transmission loss and absorption of corrugated PVC panels. Tests were conducted in reverberation room and it has been proven, both theoretically and experimentally, that there is a relationship between the panel type and its transmission loss and absorption. Panel size and thickness was also taken into consideration during testing procedure. Analyses also show that the Hansen model was not perfectly accurate when predicting the transmission loss for some of the tested samples.
Steam discharge produces noise due to rapid expansion and a temperature drop of ejected steam. This is why steam silencers are used to change one-stage into multi-stage expansion, which reduces the intensity of pressure and temperature drop during this process and shifts emitted noise into higher frequencies, which are easier to dampen. This paper presents a flow-acoustic numerical model of a steam silencer. It is meant to help to obtain a precise analysis of phenomena occurring in steam silencers and improve the process of designing this type of device. The model described in this paper was based on the parameters of a real working unit manufactured in the Institute of Power Engineering – Thermal Technology Branch. Most of the steam silencers are designed based on construction guidelines that have not been changed for a long time. This restrained an increase in the acoustics efficiency of the steam silencers. An improvement of their flow and acoustic properties allows for the development of smaller, more efficient, and lighter construction. The current version of the model was used for the analysis of flow and acoustic changes which occur after modifying the lower region of a shell of the steam silencer. The proposed modification allowed for a 19% increase in mass flow rate through the silencer and noise reduction in the low-frequency range.