Joanna Maria Kopania

Dr. Joanna Maria Kopania

Lodz University of Technology, Lodz, Poland
+1
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2021 in Energies
Verified
Journal Article
Open access
PDF file
Andrzej MarcinkowskiAndrzej Marcinkowski
Andrzej Marcinkowski
Joanna Maria KopaniaJoanna Maria Kopania
Joanna Maria Kopania
Although one of the most harmful factors to health is noise, it is often ignored in life cycle assessment (LCA) studies. Most researches regarding noise inclusion in LCA focus on the problem of transport noise, and very few works consider the impact of noise emitted by other sources. This study addresses the effects of noise generated by cogeneration plants. The main objective is to assess the environmental performance of the noise reduction system by considering the health effects of noise due to steam discharge as well as to compare the environmental loss associated with the production and disposal of a steam silencer with the benefits resulting from its application for noise reduction. A method to determine midpoint and endpoint human health indicators for a composition of noise emitted by intermittent stationary source and background noise is developed. The results indicate that the health benefit due to noise reduction is six orders of magnitude greater than the environmental loss. Human health indicators attributable to noise reduction in the residential zones under consideration span a wide range of disability adjusted life years (DALY)—0.16–136 DALY. The greatest values occur in the densely populated areas located close to the noise source. A formula is proposed to express annoyance of the residents of individual zones depending on their distance to the steam discharge source, its sound power level, and existing background noise level. Uncertainty and sensitivity analyses have been carried out assuming other conditions. Modifications of sound power level, noise reduction efficiency, steam discharge duration, and the silencer lifetime have not affected the overall conclusion drawn.

5 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Joanna Maria KopaniaJoanna Maria Kopania
Joanna Maria Kopania
WZWojciech Zakrzewicz
Wojciech Zakrzewicz
Przemyslaw KubiakPrzemyslaw Kubiak
Przemyslaw Kubiak
AMAdam Mrowicki
Adam Mrowicki
MGMichał Głogowski
Michał Głogowski
PGPatryk Gaj
Patryk Gaj
The primary goal of this research was to study transmission loss and absorption of fluted PVC panels using experimental and theoretical methods. During these studies, the link between panel size, thickness, transmission loss, and absorption was considered. We measured the transmission loss and absorption in reverberation rooms according to ISO standards. Hansen’s theoretical model was also used to predict the transmission loss. Agreement between TL prediction according to Hansen’s model and measured results for some of the studied panels were observed. However, the analytical prediction, according to Hansen’s model, for heavy fluted PVC panels must be used with caution. The absorption properties of the studied fluted PVC panels are also connected with their resonance, and, in addition, the resonance frequency is associated with the space between the ribs and wave propagation in the panel’s plane.


9 October 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Joanna Maria KopaniaJoanna Maria Kopania
Joanna Maria Kopania
KWKamil Wójciak
Kamil Wójciak
MCMarcel Czarnecki
Marcel Czarnecki
This study investigates the acoustic and aerodynamic performance of cylindrical silencers incorporating uniform and sequential mixed-perforation liners under grazing-flow conditions. Five uniform perforated panels with hole diameters ranging from 0.4 to 5 mm and four mixed configurations (0.4/1, 0.6/1, 0.8/1, and 1/5 mm) were analysed. The mixed silencers consisted of two consecutive 450 mm sections. Acoustic performance was experimentally evaluated in the 100–10,000 Hz frequency range at flow velocities of 4, 8, and 12 m/s, including insertion loss, flow-generated noise, and pressure loss. The experimental analysis was complemented by the Maa impedance model and the flow-dependent Rao–Munjal model. Impedance contrast ratios were additionally introduced to characterise differences between consecutive sections of the mixed liners. Maximum insertion-loss values of 35.5–41.0 dB were observed around 2000 Hz. Neither theoretical model exhibited a corresponding characteristic feature around 2000–2500 Hz, indicating that the attenuation maximum cannot be attributed to perforation impedance alone. The results demonstrate that perforation geometry primarily controls local resistive and reactive behaviour, whereas maximum attenuation results from the combined acoustic response of the perforated liner, porous backing, silencer geometry, and wave-propagation conditions. Sequential perforation therefore provides an additional design parameter for tailoring silencer performance without increasing its overall dimensions.

1 June 2018 in Mechanics and Mechanical Engineering
Verified
Journal Article
Open access
PDF file
PGPatryk Gaj
Patryk Gaj
Joanna Maria KopaniaJoanna Maria Kopania
Joanna Maria Kopania
Acoustic emission through duct walls is an important problem in engineering acoustics. This phenomenon most commonly occurs in heating, ventilating and air-conditioning (HVAC) and other gas flow ducting (large industrial silencers). Many works focus on elaboration of more exact description of the acoustic field phenomena reflecting the real conditions in which these appliances operate. As a standard, circle or rectangular ducts are used in ventilation systems. However, technical conditions during the installation of the HVAC system, due to the limitation of the assembly space, require often the use of channels with other geometries. This paper presents aeroacoustical parameters of three most common cross-sectional shapes of air-moving ductwork. The rectangular, square with roundedcorners and circular ducts were studied. The “natural” duct attenuation, which is a consequence of duct shape or noise breakout and involves a diminution of the internally propagated sound power was observed. Natural duct attenuation can be a useful way of reducing sound power levels in long runs of duct.

20 October 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
Mariusz JabłońskiMariusz Jabłoński
Mariusz Jabłoński
Piotr BorkowskiPiotr Borkowski
Piotr Borkowski
GBGrazyna Budryn
Grazyna Budryn
JGJoanna Grzelczyk
Joanna Grzelczyk
Joanna Maria KopaniaJoanna Maria Kopania
Joanna Maria Kopania
DRDariusz Romejko
Dariusz Romejko
This publication presents an interdisciplinary approach to methods and tools supporting the development and implementation of the triple digital transformation, which has a significant impact on the development of cities and buildings. An example described in this implementation is the area of the Lodz Region and the City of Lodz, subject to Regional Smart Specializations (RISs). The proposed methods and concepts can be applied much more broadly, as they are scalable and are also used by the authors in scientific research and international European projects. Methods: The proposed concepts concern a comprehensive approach to implementing the triple transformation in the development of the smart city idea, based on cooperation between state administration, local governments, scientific institutions, and businesses. The authors have created an interdisciplinary team of scientists, where, based on specific local challenges and needs, the most important stages of action have been defined, and standards and modern digital tools have been identified to support the planning, design, implementation, and evaluation of green strategies and energy efficiency. This publication aims to create a space for the exchange of knowledge and experience, the presentation of innovative solutions, and the establishment of cooperation for the creation of smart and sustainable cities of the future.