MEHMET AKİF KARTAL

Dr. MEHMET AKİF KARTAL

orcid
Dr. Mechanical Engineer

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 July 2022 in Numerical Heat Transfer, Part A: Applications
Verified
Journal Article
Open access
AİAhmet Talat İnan
Ahmet Talat İnan
Hasan KotenHasan Koten
Hasan Koten
MEHMET AKİF KARTALMEHMET AKİF KARTAL
MEHMET AKİF KARTAL
Basically, in the working principle, the transition from high temperature to low temperature is achieved, while the temperature value of the one with the lower temperature rises, this process can continue until the temperature value of the other decreases and reaches equilibrium. Therefore, heat exchangers are highly preferred in the industry where heat transfer is possible, in mass production facilities where nonstop production takes place such as the pharmaceutical and paper industry, and in sectors where energy efficiency is of utmost importance. In the analyses, it is aimed to investigate the changes in the fluid behavior of the conventional one-piece type baffle plate shell and tube heat exchanger at different baffle plate intervals by keeping it constant at different flow rates. Here, water was used as the working fluid to examine the changes in fluid behavior, the direction in which the heat transfer rate per pressure drop changes, the pressure drop and the effects on the body side heat transfer coefficient. As a result, it has been determined that the distance between the baffle plates used in the conventional one-piece type shell and tube heat exchanger varies and the values compared at different flow ranges differ.

14 May 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MEHMET AKİF KARTALMEHMET AKİF KARTAL
MEHMET AKİF KARTAL
GAGurcan ATAKOK
Gurcan ATAKOK
Sezgin ErsoySezgin Ersoy
Sezgin Ersoy
Cooling processes are responsible for a significant portion (20%) of global energy consumption and raise environmental concerns such as ozone depletion, the greenhouse effect, and high energy use. This study investigates the potential of R152a, a refrigerant with low global warming potential (GWP), as a more sustainable alternative. The performance, safety, and operational efficiency of R152a were evaluated under various conditions. Although R152a offers high performance and low GWP, its flammability necessitates caution, especially in certain mixtures. A 12-pass tube-type heat exchanger model was simulated using computational fluid dynamics (CFD) to analyze the fluid behavior within the exchanger. The pressure, density, dynamic pressure, Prandtl number, total pressure, and temperature distributions for both R152a and H2O (water) were visualized using contour plots. The simulations comprehensively examined the fluid behavior inside and outside the heat exchanger. The results revealed the influence of the temperature on the internal dynamic pressure and density of R152a. Compared with R134a, R152a demonstrated superior performance but a lower coefficient of performance (COP) than R32. Studies also suggest that R152a exhibits lower irreversibility in Organic Rankine Cycle (ORC) systems than R245fa. These findings suggest that R152a holds promise for future refrigeration systems, as supported by existing research on its performance and compatibility. One study focused on optimizing the heat exchanger performance by maximizing the heat capacity and minimizing the pressure drop. This study employed a parallel-flow heat exchanger with R152a as the coolant for the hot process water. The temperature changes, pressure drops, and resulting energy efficiency and thermal performance of both fluids were analyzed. The results highlight the distinct energy efficiencies and thermal performance of the employed fluids.
1

20 August 2024 in Frontiers in Energy Research
Verified
Journal Article
Open access
PDF file
MEHMET AKİF KARTALMEHMET AKİF KARTAL
MEHMET AKİF KARTAL
Due to the rapidly developing technologies, fast and practical solutions are offered to the problems encountered in daily life. Metropolitan cities are greatly affected by the ever-increasing population and migrations to big cities, the increase in production with the economy and job opportunities. At this point, with the introduction of smart transportation systems, fast and effortless solutions can be produced by saving time and space. City life can be facilitated by applying more efficient and rational solutions with smart transportation systems. In this study, it is aimed to investigate information about the Intelligent Transportation Systems and one of its applications, park and ride, which has created a significant agenda within the scope of transportation engineering in the recent past, and to provide information about the investments made by examining the application for Istanbul along with its various applications in the world. Some suggestions will be made by emphasizing the importance of the park and Ride smart city application for Istanbul. In conclusion, predictions of P + R application and energy consumption in periods of 1–24 months were made through machine learning. By obtaining energy consumption data thanks to machine learning, carbon gas emissions and its effects on greenhouse gases were also examined. It can be thought that by obtaining energy consumption data for the long term thanks to machine learning, it can make significant contributions to future investments, green environment-green world, and climate change studies.

22 November 2023 in Case Studies in Thermal Engineering
Verified
Journal Article
Open access
MEHMET AKİF KARTALMEHMET AKİF KARTAL
MEHMET AKİF KARTAL
AFAhmet Feyzioğlu
Ahmet Feyzioğlu

1 April 2024 in Energies
Verified
Journal Article
Open access
PDF file
MEHMET AKİF KARTALMEHMET AKİF KARTAL
MEHMET AKİF KARTAL
AFAhmet Feyzioğlu
Ahmet Feyzioğlu
This study investigated the influence of BFFSP on the thermohydraulic performance of a SATHEC(s) using a novel computational approach. The novelty lies in the detailed exploration of the interplay between BFFSP, MFRT, and key performance parameters. Unlike prior studies, which often focus on a limited range of operating conditions, this work employs a comprehensive parametric analysis encompassing two BFFSPs (95 mm and 125 mm) and four MFRTs (0.1, 0.3, 0.5, and 0.7 kg/h). This extensive analysis provides a deeper understanding of the trade-off between the HTRFR enhancement and PDP associated with the BFFSP across a wider range of operating conditions. This investigation leverages the power of computational fluid dynamics (CFD) simulations for high-fidelity analysis. ANSYS Fluent, a widely recognized commercial CFD software package, was used as a computational platform. A three-dimensional steady-state model of HEXR geometry was established. The cold fluid was modeled as water, and the hot fluid was modeled as water. The selection of appropriate turbulence models is crucial for accurate flow simulations within the complex geometry of HEXR. This study incorporates a well-established two-equation turbulence model to effectively capture turbulent flow behavior. The governing equations for mass, momentum, and energy conservation were solved numerically within the CFD framework. Convergence criteria were meticulously established to ensure the accuracy and reliability of the simulation results. BFFs are crucial components in HEXRs as they promote fluid mixing and turbulence on the HTRFR surface, thereby enhancing HTRFR. This study explores the interplay between BFFSP and HTRFR effectiveness. It is hypothesized that a larger BFFSP (125 mm) might lead to a higher HTC owing to the increased fluid mixing. However, the potential drawbacks of the increased PDP due to the flow restriction also need to be considered. The PDP across the HEXR is a critical parameter that affects pumping costs and overall system yield. This study investigates the impact of BFFSP on the PDP. It is expected that a larger BFFSP (125 mm) will result in a higher PDP, owing to the increased resistance to fluid flow. Here, we aim to quantify the trade-off between enhanced HTRFR and increased PDP associated with different BFFSPs. The optimal design of an HEXR seeks a balance between achieving a high HTRFR rate and minimizing pressure losses. HTRPD, a metric combining both HTC and PDP, was employed to evaluate the thermohydraulic performance. We hypothesized that a specific BFFSP might offer a superior HTRPD, indicating an optimal balance between HTRFR effectiveness and PDP for the investigated HEXR geometry and operating conditions. CFD simulations were conducted using ANSYS Fluent to analyze the effects of BFFSP and MFRT on the HTC, PDP, and HTRPD. The simulations employed a commercially available HEXR geometry with water as the cold and hot fluid. The results are presented and discussed to elucidate the relationships between the BFFSP, MFRT, and key performance parameters of the HEXR. This study provides valuable insights into the influence of BFFSP on the thermohydraulic performance of HEXRs. The findings can aid in optimizing the HEXR design by identifying the BFFSP that offers the best compromise between HTRFR enhancement and PDP for specific operating conditions. The results contribute to the knowledge base of HEXR design and optimization, potentially leading to improved yield in various industrial applications. The results indicate that a larger BFFSP (125 mm) leads to higher outlet temperatures but also results in a higher PDP compared to the 95 mm design. Conversely, the 95 mm BFFSP exhibits a lower PDP but achieves a lower HTC. In terms of thermohydraulic performance, as indicated by HTRPD, the 95 mm BFFSP with the lowest MFRT (0.1 kg/h) achieved the highest value, surpassing the 125 mm design by 19.81%. This suggests that a 95 mm BFFSP offers a better trade-off between HTRFR effectiveness and pressure loss, potentially improving the overall HEXR performance.

23 March 2026 in Engineering Computations
Verified
Journal Article
Closed access
PDF file
MEHMET AKİF KARTALMEHMET AKİF KARTAL
MEHMET AKİF KARTAL
Purpose: This study aims to deliver a high-fidelity, open-literature Computational Fluid Dynamics (CFD) dataset and validated aerodynamic performance curves for the commercial DJI 9450 self-tightening propeller in hover across the practical quadcopter operating range (2,000–3,500 RPM). By combining a refined SST k-ω MRF methodology (GCI < 0.9%) with rigorous validation against NASA Ames, UIUC, TUM and DJI experimental benchmarks (errors < 1.5%) establishes the first comprehensive thrust, torque, power, and efficiency characteristics for this exact geometry. The work identifies the optimum efficiency point (η_max = 76.4% at 3,100 RPM) and quantifies performance degradation mechanisms at higher RPM, providing immediate design guidelines for commercial multirotor UAVs. Design/methodology/approach: A high-fidelity steady-state CFD framework was developed using ANSYS Fluent 2024 R2. The exact DJI 9450 self-tightening propeller geometry (239 mm diameter) was modelled. A cylindrical domain with Multiple Reference Frame (MRF) was employed. A hybrid hexa-dominant mesh (6.96 × 106 cells, 15 prism layers, y+ < 0.95) was generated and grid convergence verified (GCI = 0.82% for thrust). The SST k-ω Turbulence model with low-Re corrections and second-order discretization was used. Simulations were performed at 2,000, 2,500, 3,000 and 3,500 RPM. Results were rigorously validated against NASA/CR-2017-219428 (Nowicki, 2017), Brandt and Selig (2017), Theile (2016) and DJI official reports (mean errors < 1.5%). Findings: CFD simulations reveal that thrust rises quadratically from 1.57 N (2,000 RPM) to 5.91 N (3,500 RPM), while required power increases from 28.4 W to 148.6 W. Propeller efficiency peaks at 76.4% at 3,100 RPM and drops sharply beyond 3,200 RPM due to intensified tip vortices and local Mach number reaching 0.41. Turbulence kinetic energy at blade tips exceeds 87 m2/s2 at 3,500 RPM, causing significant energy dissipation. Validation against NASA/CR-2017-219428 (Nowicki, 2017), UIUC, TUM and DJI datasets confirms thrust and torque predictions within 1.5% error, establishing 3,000–3,200 RPM as the optimum operating window for the DJI 9450 propeller in hover. Originality/value: This study presents the first open-literature, high-fidelity CFD dataset and validated performance curves (thrust, torque, power, η) for the exact DJI 9450 self-tightening propeller across the realistic quadcopter hover range of 2,000–3,500 RPM. Unlike previous generic low-Re or high-RPM studies, it achieves grid-converged solutions (GCI < 0.9%) and rigorous validation against four independent experimental benchmarks, including NASA/CR-2017–219428 (Nowicki, 2017), with errors below 1.5%. The work identifies the precise efficiency peak (η = 76.4% at 31,00 RPM) and quantifies tip-vortex-induced losses, delivering immediately usable design data for millions of commercial Phantom-series and similar multirotor UAVs worldwide.