Advances in the nanotechnology have been actively applied to the field of aerospace engineering where there is a constant necessity of high durable material with low density and better thermo-mechanical properties. Over the past decade, carbon nanotubes-based composites are widely utilised owing to its fascinating properties resulting in series of multidisciplinary industrial applications. Carbon nanotubes (CNTs) are rolled up sheets of carbon in nanoscale which offers excellent thermal and mechanical properties at lower density which makes them suitable reinforcement for composites in aerospace applications. Owing to its high Young’s modulus and chemically inert behaviour, CNTs are forefront of material research with applications varying from water purification to aerospace applications where applicational sector remains a mystery. Although there has been numerous research on the CNTs-based materials, there are only limited studies focusing on its utilisation for the field of aerospace engineering. As a result, in this review, we intend to cover the processing and synthesis techniques, thermal and mechanical properties as well as few industrial applications of CNTs-reinforced ceramic composites. Further, any potential development in additive manufacturing-based technique for fabricating CNT/ceramics and its applications in aerospace industries have been highlighted.
18 May 2018 in International Journal of Ambient Energy
Carbon nanotubes are one of the major research areas in the field of nanotechnology, due to its mechanical and electro-conductive properties in the field of engineering and medical sciences. This paper focuses on preparation of multi-walled carbon nanotubes (MWCNTs) for the mass production using thermal catalytic chemical vapour deposition method. The synthesis of MWCNTs was made by breakdown of acetylene (C2H2) gas and Fe/MgO acting as catalyst. The surface morphology and structure of MWCNTs were characterised by scanning electron microscopy (SEM). Also phase identification and crystalline size of the nanopowder were determined by XRD. The particle size of MWCNTs was verified by SEM analysis and it was in the range of 20–30 nm and elemental analysis was carried out through energy dispersive analysis X-ray. Furthermore, thermal decomposition of the material property was studied by thermogravimetric analysis.
This study emphasis on a novel fabrication technique to fabricate hybrid cermets using Al 6061 alloy with nano sized SiC, Al2O3 and TiO2 as reinforcements. During the fabrication process, the melted pool was ultrasonicated to disperse nanoparticles at 20 kHz for 5 min and pressure of 50 MPa was applied to eliminate voids. The influence of nanoparticles on physical, thermal and mechanical properties were evaluated by tensile, wear and thermal studies. Cermets with Al2O3 reinforcements showed higher mechanical performance compared to Al alloy. This enhancement could be related to the uniform distribution of Al2O3 with refinement in grain size of Al alloy which was observed via surface analysis. The morphological studies provided justifiable evidence of homogeneous distribution, nominal cluster along with agglomeration and cavities shrinking on the cermets. The agglomeration of nanoparticles along with SiC protected the cermet in corrosion and abrasive wear by ~ 97% and ~ 71%. The study evidenced the novel fabrication method using ultrasonic rheo-squeeze casting led to improvement in mechanical and thermal properties of the hybrid cermets. Graphical
11 February 2025 in Advanced Engineering Materials
The increase in demand for more efficient gas turbine engines has driven the advancement of new materials and their specific requirements. Ceramic matrix composites (CMCs) have emerged as promising materials for aerospace applications due to their stability at high temperatures and their superior weight‐to‐thrust ratio compared to Ni‐based superalloys. Within the realm of CMCs, oxide‐based variants stand out for their exceptional oxidation resistance and thermo‐mechanical properties. While oxide‐based CMCs offer superior qualities at a lower manufacturing cost, their adoption remains rather limited in comparison to non‐oxide CMCs. This limitation stems from their higher thermal expansion coefficient and reduced operational temperature. This review delves into the processing techniques, material composition, and fiber architecture design of oxide‐based CMCs. Additionally, it explores their mechanical properties and investigates failure mechanisms such as fiber debonding, delamination, and fiber pull‐outs in various thermo‐mechanical environments to ascertain their stability across diverse applications. To widely comprehend the usage of oxide‐based CMCs in aerospace applications, this review thoroughly examines their corrosion behavior and delineates effective prevention methods. The corrosion characteristics of oxide‐based CMCs are critically evaluated, along with a nuanced exploration of their potential applications beyond aerospace, encompassing sectors like nuclear power and other industries.
This paper delves into the transformative role of Machine Learning (ML) and Artificial Intelligence (AI) in materials science, spotlighting their capability to expedite the discovery and development of newer, more efficient, and stronger compounds. It underscores the shift from traditional, resource-intensive approaches toward data-driven methodologies that leverage large datasets to predict properties, identify new materials, and optimize synthesis conditions with a satisfactory level of accuracy. Highlighting various techniques, including supervised, unsupervised, and reinforcement learning, alongside deep learning potential, the chapter presents case studies and applications ranging from predicting stress points in stochastic fields to optimizing thermal protection systems for spacecraft re-entry. It also explores the challenges and future directions, emphasizing the need for integrating experimental validations and developing tailored algorithms to overcome data and computational constraints. The narrative showcases ML and AI’s promise in revolutionizing material discovery, paving the way for innovative solutions in science and engineering.