Nanofluids as an EOR technique are reported to enhance oil recoveries. Among all the nanomaterial silica with promising lab results, economic and environmental acceptability are an ideal material for future applications. Despite the potential to enhance recoveries, understanding the two-fold impact of parameters such as concentration, salinity, stability, injection rate, and irreproducibility of results has arisen ambiguities that have delayed field applications. This integrated study is conducted to ascertain two-fold impacts of concentration and salinity on recovery and stability and evaluates corresponding changes in the recovery mechanism with variance in the parameters. Initially, silica nanofluids’ recovery potential was evaluated by tertiary flooding at different concentrations (0.02, 0.05, 0.07, 0.1) wt. % at 20,000 ppm salinity. The optimum concentration of 0.05 wt. % with the highest potential in terms of recovery, wettability change, and IFT reduction was selected. Then nano-flooding was carried out at higher salinities at a nanomaterial concentration of 0.05 wt. %. For the mechanism’s evaluation, the contact angle, IFT and porosity reduction, along with differential profile changes were analyzed. The recovery potential was found at its highest for 0.05 wt. %, which reduced when concentrations were further increased as the recovery mechanisms changed and compromised stability. Whereas salinity also had a two-fold impact with salinity at 30,000 ppm resulting in lower recovery, higher salinity destabilized the solution but enhanced recoveries by enhancing macroscopic mechanisms of pore throat plugging.

The Chiltan formation is a potential hydrocarbon-producing reservoir in the Indus Basin, Pakistan. However, its diagenetic alterations and heterogeneous behavior lead to significant challenges in accurately characterizing the reservoir and production performance. This manuscript aims to utilize six carbonate core samples of the Chiltan limestone to conduct an in-depth analysis of the diagenetic impacts on reservoir quality. The comprehensive formation evaluation was carried out through thin-section analysis, SEM-EDS, and FTIR investigation, as well as plug porosity and permeability measurements under varying stress conditions. In result, petrography revealed three microfacies of intraclastic packestone (MF1), bioclastic pelliodal packestone (MF2), and bioclastic ooidal grainstone (MF3), with distinct diagenetic features and micro-nano fossil assemblages. The MF1 microfacies consist of bioclasts, ooids, pellets, and induced calcite, while the MF2 microfacies contain micrite cemented peloids, algae, and gastropods. Although, the MF3 grainstone microfacies contains key features of bioclasts, milliods, bivalves, echinoderms, and branchiopods with intense micritization. Diagenesis has a significant impact on petrophysical properties, leading to increased reservoir heterogeneity. The specified depositional environment exposed the alteration of the Chiltan formation during distinct diagenetic phases in marine, meteoric, and burial settings. Marine diagenesis involves biogenic carbonates and micro-nano fossils, while meteoric diagenesis involves mineral dissolution, reprecipitation, secondary porosity, compaction, cementation, and stylolite formation. Pore morphology and mineralogy reveal a complex pore network within the formation, including a micro-nano pore structure, inter–intra particle, moldic, vuggy, and fenestral pores with variations in shape, connectivity, and distribution. Various carbonate mineral phases in the formation samples were analyzed, including the calcite matrix and dolomite crystals, while silica, calcite, and clay minerals were commonly observed cement types in the analysis. The core samples analyzed showed poor reservoir quality, with porosity values ranging from 2.02% to 5.31% and permeability values from 0.264 mD to 0.732 mD, with a standard deviation of 1.21. Stress sensitivity was determined using Klinkenberg-corrected permeability at increasing pore pressure conditions, which indicated around 22%–25% reduction in the measured gas permeability and 7% in Klinkenberg permeability due to increasing the net confining stress. In conclusion, the Chiltan formation possesses intricate reservoir heterogeneity and varied micropore structures caused by diagenesis and depositional settings. The formation exhibits nonuniform pore geometry and low petrophysical properties caused by the diverse depositional environment and various minerals and cement types that result in a low-quality reservoir. Stress sensitivity further decreases the permeability with varying stress levels, emphasizing the need of stress effects in reservoir management. The results of this study provide a solid foundation in reservoir characterization and quality assessment that has implications for predicting fluid flow behavior, providing insight into geological evolution and its impact on reservoir quality and leading to improving resource exploration and production strategies.

The Chiltan Formation is a potential hydrocarbon-producing reservoir in the Indus Basin, Pakistan. However, its diagenetic alterations and heterogeneous behavior lead to significant challenges in accurately characterizing the reservoir and production performance. This manuscript aims to utilize Chiltan Limestone core samples to conduct a detailed analysis of the diagenetic impacts on reservoir quality. The formation evaluation was carried out through thin section analysis, SEM-EDS and FTIR investigation, as well as plug porosity and permeability measurements under different stress conditions. In results, Petrography revealed three microfacies with distinct diagenetic features and micro-nano fossil assemblages, including intraclasts, pelloids, bioclasts, and stylolites. Diagenesis has a significant impact on petrophysical properties, leading to increased reservoir heterogeneity. The specified depositional environment exposed the alteration of the Chiltan formation during distinct diagenetic phases in marine, meteoric, and burial settings. Pore morphology and mineralogy reveals complex micro-pore structure with various carbonate mineral phases and cement types in the formation samples. The average porosity and permeability of the core samples were found to be 3.4% and 0.449 mD respectively, indicating poor reservoir quality. Stress sensitivity was determined using Klinkenberg corrected permeability, which indicated a reduction in measured and absolute permeability due to increasing confining stress, further reducing the pore throat structure of the formation. In conclusion, the Chiltan formation possesses intricate reservoir heterogeneity and varied micro-pore structure caused by diagenesis and depositional settings. The formation is classified as a low-quality reservoir due to its non-uniform pore geometry, which exhibits low petrophysical properties resulting from overburden stress. The results of this study provide solid foundation in reservoir characterization and quality assessment which has implications for exploring and exploitation of indigenous resources.