This paper concerns the optimization and comparison of six different axial-flux permanent magnet (AFPM) machine topologies for an in-wheel direct drive application. The objective of the optimization is to reach maximum power density, which is of essence for an in-wheel motor. The machine topologies are optimized using the 3D analytical charge model in combination with a thermal equivalent circuit model for calculation of the temperature rise and thermal dependency of the main electromagnetic losses. All investigated AFPM machine topologies are variations of the internal stator twin external rotor AFPM machine. The resulting designs are compared based on their power density, weight, efficiency, and permanent magnet volume. The distributed winding topology with a quasi-Halbach magnet arrangement shows the best performance within the optimization problem.
This paper concerns the design optimization of two axial-flux permanent magnet (AFPM) machines, aimed to be used as a direct drive in-wheel motor for the propulsion of a solar-powered electric vehicle. The internal stator twin external rotor AFPM machine topology having either a distributed or toroidal stator winding configuration is investigated. The objective of the design optimization is to minimize the total volume of the machine. A gradient-based optimization algorithm is employed on a non-linear 2D equivalent motor model. The motor model consists of coupled electromagnetic and thermal models based on an Isogeometric Analysis (IGA) approach. A wide range of pole-pair numbers are optimized and compared in terms of power density and efficiency. Finally, the radius to evaluate the 2D model as a function of the pole-pair number is given, which minimizes the discrepancy with respect to the 3D finite element method (FEM).
This paper concerns the optimal design and comparative analysis of resonant and non-resonant high-frequency GaN-based rotating transformers. A multi-physical design approach is employed, in which magnetic, electrical, and thermal models are coupled. The results are verified by experiments. Two different optimization objectives are considered; firstly, the efficiency of two standard core geometries is maximized for a required output power level. Secondly, a geometrical optimization is performed, such that the core inertia is minimized for the desired output power level. The results of both design optimizations have shown large improvements in terms of output power and core inertia as a result of applying series–series resonant compensation.
This paper concerns the modeling of eddy current losses in conductive materials in the vicinity of a high-frequency transformer; more specifically, in two-dimensional problems where a high ratio between the object dimensions and the skin-depth exists. The analysis is performed using the Spectral Element Method (SEM), where high order Legendre–Gauss–Lobatto polynomials are applied to increase the accuracy of the results with respect to the Finite Element Method (FEM). A convergence analysis is performed on a two-dimensional benchmark system, for both the SEM and FEM. The benchmark system consists of a high-frequency transformer confined by a conductive cylinder and is free of complex geometrical shapes. Two different objectives are investigated. First, the discretizations at which the relative error with respect to a reference solution is minimized are compared. Second, the discretizations at which the trade-off between computational effort and accuracy is optimized are compared. The results indicated that by applying the SEM to the two-dimensional benchmark system, a higher accuracy per degree of freedom and significantly lower computation time are obtained with respect to the FEM. Therefore, the SEM is proven to be particularly useful for this type of problem.
Variable flux reluctance machines (VFRMs) are permanent-magnet-free three-phase machines and are promising candidates for applications requiring low cost and robustness. This paper studies the torque ripple and minimization methods for 12-stator VFRMs. Starting with the analysis of harmonics in the self and mutual inductances of field and armature windings, instantaneous torque equations are derived by virtual work method, which give a clear view on the dominated torque ripple components in VFRMs. Afterwards, the influences of motor topology on harmonics of the inductances as well as the torque ripple are investigated, such as number of rotor poles and tooth arc, etc. On the basis of the aforementioned analysis, harmonic injections in field current and armature current are analyzed for torque ripple reduction. The effectiveness of these two methods is investigated for non-saturated and saturated 12/10 VFRMs based on 2D finite element analysis. The results show good performance of torque ripple minimization by harmonic armature current injection.