Lakshay Jain

Dr. Lakshay Jain

School of Engineering, University of Liverpool, Liverpool, UK
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 November 2022 in Energies
Verified
Journal Article
Open access
PDF file
ONOmid Noorikalkhoran
Omid Noorikalkhoran
DLDzianis Litskevich
Dzianis Litskevich
ADAnna Detkina
Anna Detkina
LJLakshay Jain
Lakshay Jain
GCGregory Cartland-Glover
Gregory Cartland-Glover
Bruno MerkBruno Merk
Bruno Merk
Molten salt reactors (MSRs), as one of the six main technologies of Gen IV, can meet the broad area of sustainability, economics, safety and reliability, proliferation resistance and physical protection goals. One of the main and first challenges in designing molten salt fast reactors (MSFRs) is the selection of an appropriate molten salt fuel system based on the envisaged applications and objectives. In this study’s series, a full-scope evaluation has been conducted about employing either chloride or fluoride salt fuels as the main competitors’ candidates for fuel salt in MSFR designs. Two distinguished projects, EVOL (CNRS, Grenoble-France), based on fluoride salt, and iMAGINE (The University of Liverpool, UK), based on chloride salts, were considered in order to achieve this goal as case studies. The first part of this series (part 1—this article) deals with the investigation of the thermophysical properties of the salt fuel system, criticality search and neutron-flux energy spectrum. An identical typical design of the MSFR core has been considered for a neutronic simulation by using MCNPX V2.7 based on the chemical composition of the fuel salt mentioned in both projects. The thermophysical evaluation has been conducted through literature research and theoretical methods based on the experimental values for the salt component properties. The results of the study are presented for thermophysical properties, including the melting point, vapour pressure/boiling point, specific heat capacity, thermal conductivity and density, in addition to neutronic simulation for the core critical dimension and neutron-flux spectrum of both the chloride- and fluoride-based salt fuel systems. In the discussion of the results, it is concluded that both the chloride and fluoride salt fuel systems have benefits that are seen on different comparative parameters. The delivered data will provide future decision makers with evidence for the salt choice for balancing their design objectives with the opportunities and expectations. Thus, a final selection of the most appropriate salt fuel system to be used in MSFRs will be postponed for more investigation in the final part of this article series, combining the data with different potential user profiles.

29 March 2023 in Energies
Verified
Journal Article
Open access
PDF file
Bruno MerkBruno Merk
Bruno Merk
DLDzianis Litskevich
Dzianis Litskevich
ADAnna Detkina
Anna Detkina
ONOmid Noorikalkhoran
Omid Noorikalkhoran
LJLakshay Jain
Lakshay Jain
GCGregory Cartland-Glover
Gregory Cartland-Glover
Nuclear technologies have the potential to play a major role in the transition to a global net-zero society. Their primary advantage is the capability to deliver controllable 24/7 energy on demand. However, as a prerequisite for successful worldwide application, significant innovation will be required to create the nuclear systems of the 21st century, the need of the hour. The pros (low harmful emissions, high reliability, low operational expenses, and high energy density) and cons (environmental damage, fuel waste disposal concerns, limited uranium reserves, and long construction time-frame) of nuclear are discussed and analysed at different levels—the societal and public recognition and concerns (accidents, weapons, mining, and waste) as well as the scientific/engineering and economic level—to assure a demand-driven development. Based on the analysis of the different challenges, a vision for the nuclear system of the 21st century is synthesised consisting of three pillars—unlimited nuclear energy, zero waste nuclear, and accident-free nuclear. These three combined visions are then transformed into dedicated and verifiable missions that are discussed, in detail, regarding challenges and opportunities. In the following, a stepwise approach to the development of such a highly innovative nuclear system is described. Essential steps to assure active risk reduction and the delivery of quick progress are derived as answers to the critique on the currently observed extensive construction time and cost overruns on new nuclear plants. The 4-step process consisting of basic studies, experimental zero power reactor, small-scale demonstrator, and industrial demonstrator is described. The four steps, including sub-steps, deliver the pathway to a successful implementation of such a ground-breaking new nuclear system. The potential sub-steps are discussed with the view not only of the scientific development challenges but also as an approach to reduce the regulatory challenges of a novel nuclear technology.

3 November 2023 in Energies
Verified
Journal Article
Open access
PDF file
Bruno MerkBruno Merk
Bruno Merk
ADAnna Detkina
Anna Detkina
ONOmid Noorikalkhoran
Omid Noorikalkhoran
LJLakshay Jain
Lakshay Jain
DLDzianis Litskevich
Dzianis Litskevich
GCGregory Cartland-Glover
Gregory Cartland-Glover
The demand for improving the nuclear waste management has since long been identified as one of the major hurdles for widespread use of nuclear energy. Nuclear waste management, through partitioning and transmutation (P&T), has been researched since the 1990s with partitioning being a prerequisite for the process. Recently, an innovative approach of reactors directly operating on spent, or nowadays often called used nuclear fuel, iMAGINE has been proposed which could deliver on the aims of P&T as a side effect to more efficient and sustainable nuclear energy production in the future. A HELIOS model of the core has been used to analyze the long-term operation of a molten salt reactor including the investigation of the minor actinide accumulation over the entire burnup period. The results shown here confirm that long-term reactor operation is possible, even with higher amounts of vitrified waste loaded. Thus, it is possible to achieve the aims of P&T without prior partitioning, but it is certainly less efficient since the high concentration of minor actinides (MAs), required for efficient burning, is impossible to obtain in a short operational time. On this basis, the proposed nuclear waste management approach will be a long-term effort when it is accomplished without partitioning/separation technologies. However, none of the analyses contradicts this effort. The key points are: (a) when the technology for treating the waste is possible and reliable, the time horizon will not be a major concern; (b) the waste management is now intrinsically linked with energy production instead of requiring dedicated costly facilities, delivering a promising economic basis; (c) the waste management is now associated with long-term energy production and massively improved resource utilization. The study of feedback effects has shown that the modeled system has a strong negative feedback effect of ~−6 pcm/K, and even with spent nuclear fuel feed reduces to ~−3.8 pcm/K, ensuring the basis for a safe operation. In summary, it has been demonstrated that the objectives of P&T are achievable without prior partitioning, an approach which was never even discussed in the past. These ground-breaking results and the new insights will allow or even require rethinking the nuclear waste management of the future.

1 March 2020 in Annals of Nuclear Energy
Verified
Journal Article
Closed access
LJLakshay Jain
Lakshay Jain
RKRamamoorthy Karthikeyan
Ramamoorthy Karthikeyan
UKUmasankari Kannan
Umasankari Kannan

19 December 2022 in Energies
Verified
Journal Article
Open access
PDF file
Bruno MerkBruno Merk
Bruno Merk
ADAnna Detkina
Anna Detkina
DLDzianis Litskevich
Dzianis Litskevich
ONOmid Noorikalkhoran
Omid Noorikalkhoran
LJLakshay Jain
Lakshay Jain
GCGregory Cartland-Glover
Gregory Cartland-Glover
Nuclear technologies have strong potential and a unique role to play in delivering reliable low carbon energy to enable a net-zero society for future generations. However, to assure the sustainability required for its long-term success, nuclear will need to deliver innovative solutions as proposed in iMAGINE. One of the most attractive features, but also a key challenge for the envisaged highly integrated nuclear energy system iMAGINE, is the need for a demand driven salt clean-up system based on the principles of reverse reprocessing. The work described provides an insight into the dynamic interplay between a potential salt clean-up system and reactor operation in a plutonium-started core in a dynamic approach. The results presented will help to optimise the parameters for the salt clean-up process as well as to understand the differences which appear between a core started with enriched uranium and plutonium as the fissile material. The integrated model is used to investigate the effects of the initial fissile material on core size, achievable burnup, and long-term operation. Different approaches are tested to achieve a higher burnup in the significantly smaller Pu-driven core. The effects of different clean-up system throughputs on the concentration of fission products in the reactor salt and its consequences are discussed for general molten salt reactor design. Finally, an investigation into how a plutonium loaded core could be used to provide fuel for future reactors through fuel salt splitting is presented, with the outcome that one Pu-started reactor of the same size as a uranium-started core could deliver fuel for 1.5 new cores due to enhanced breeding. The results provide an essential understanding for the progress of iMAGINE as well as the basis for inter-disciplinary work required for optimising iMAGINE.

31 May 2024 in Energies
Verified
Journal Article
Open access
PDF file
Bruno MerkBruno Merk
Bruno Merk
ONOmid Noorikalkhoran
Omid Noorikalkhoran
LJLakshay Jain
Lakshay Jain
DADaliya Aflyatunova
Daliya Aflyatunova
AJAndrew Jones
Andrew Jones
CLCarsten Lange
Carsten Lange
The UK government and many international experts have pointed out that nuclear energy has an important role to play in the transition towards a decarbonised energy system since it is the only freely manageable very low-carbon energy technology with 24/7 availability to complement renewables. Besides current investments in light water reactor technologies, we need innovation for improved fuel usage and reduced waste creation, like that offered by iMAGINE, for the required broad success of nuclear technologies. To allow for quick progress in innovative technologies like iMAGINE and their regulation, a timely investment into urgently needed experimental infrastructure and expertise development will be required to assure the availability of capacities and capabilities. The initial steps to start the development of such a new reactor physics experimental facility to investigate molten salt fast reactor technology are discussed, and a stepwise approach for the development of the experimental facility is described. The down selection for the choice for a diverse control and shutdown system is described through manipulating the reflector (control) and splitting the core (shutdown). The developed innovative core design of having the two core parts in two different rooms opens completely new opportunities and will allow for the manifestation of the request for separated operational and experimental crews, as nowadays requested by regulators into the built environment. The proposed physical separation of safety-relevant operational systems from the experimental room should on the one hand help to ease the access to the facility for visiting experimental specialists. On the other hand, the location of all safety-relevant systems in a now separated access-controlled area for the operational team will limit the risk of misuse through third party access. The planned experimental programme is described with the major steps as follows: core criticality experiments, followed by experiments to determine the neutron flux, neutron spectrum and power distribution as well as experiments to understand the effect of changes in reactivity and flux as a function of salt density, temperature and composition change.