Leonardo Souza Caires

Mr. Leonardo Souza Caires

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 April 2025 in IEEE Transactions on Dielectrics and Electrical Insulation
Verified
Journal Article
Open access
KSKenedy Marconi Geraldo dos Santos
Kenedy Marconi Geraldo dos Santos
MPMarcelo Perotoni
Marcelo Perotoni
Elvio Prado SilvaElvio Prado Silva
Elvio Prado Silva
Amélia Moreira SantosAmélia Moreira Santos
Amélia Moreira Santos
MNMarcela S. Novo
Marcela S. Novo
RMRui A.S. Moreira
Rui A.S. Moreira
Ensuring proper shielding is essential for the electromagnetic compatibility of electronic devices and systems. This article investigates the shielding effectiveness of coaxial cables and connectors using an electric field probe. The study aims to identify shielding failures early to prevent costly fixes later. A method for measuring the electric field radiated by connectors and cables in both near-field and far-field conditions is presented. Additionally, an electromagnetic virtual model of the connector and cable was developed, incorporating the dimensions and properties of the dielectric material. The simulations focused on the impact of different dielectrics on the resonant frequency of the electric field, specifically common-mode energy. The results showed that the dielectric properties do not affect the resonant frequency in the presence of a common-mode current distribution.

28 May 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Amélia Moreira SantosAmélia Moreira Santos
Amélia Moreira Santos
RMRui A.S. Moreira
Rui A.S. Moreira
Leonardo Souza CairesLeonardo Souza Caires
Leonardo Souza Caires
RLRonaldo da Maceno Lima
Ronaldo da Maceno Lima
Elvio Prado SilvaElvio Prado Silva
Elvio Prado Silva
Ruy Alberto Corrêa AltafimRuy Alberto Corrêa Altafim
Ruy Alberto Corrêa Altafim
This study explores the vibrational behavior of Thermoformed Magneto-Piezoelectrets (TMPs), multifunctional materials consisting of thermoformed piezoelectrets with open tubular channels integrated with an additional magnetic layer. The inverse piezoelectric effect was characterized using laser vibrometry analysis, measuring the mechanical response of TMPs subjected to electrical excitation over a frequency range of 0–20 kHz. Vibrational analysis was conducted at 144 spatial points, enabling the construction of detailed three-dimensional (3D) maps of the vibration operational modes and the spatial distribution of the piezoelectric coefficient (d33). The results demonstrated significant frequency-dependent behavior, with open channels exhibiting pronounced resonance peaks, whereas valleys displayed smoother and more uniform responses due to enhanced damping effects. The observed heterogeneity in vibrational behavior is attributed to structural variations, material composition, and anisotropic coupling between the piezoelectric and magnetic properties. The findings presented in this research provide a comprehensive understanding of the development and utilization of TMPs, offering parameters for enhancing their application and supporting new discoveries in studies related to the fabrication of novel thermoformed piezoelectric sensors.

6 January 2026 in NDT
Verified
Journal Article
Open access
PDF file
MSMário C. O. Spinelli
Mário C. O. Spinelli
SBSalomão S. Batista
Salomão S. Batista
Polyane Alves SantosPolyane Alves Santos
Polyane Alves Santos
KSKenedy Marconi Geraldo dos Santos
Kenedy Marconi Geraldo dos Santos
Crescencio LimaCrescencio Lima
Crescencio Lima
LSLuiz G. M. Souza
Luiz G. M. Souza
The reuse of industrial residues has gained importance due to environmental and public health concerns associated with improper waste disposal. Steel scale (CDA), a by-product of machining and rolling operations, represents a residue with technological potential for incorporation into polymer composites. This study developed a low-cost and sustainable material by reinforcing an orthophthalic polyester matrix with CDA and systematically evaluated its mechanical, thermal, and structural properties. Four formulations were prepared based on the maximum feasible filler loading: R (pure resin), C1 (50% CDA), C2 (100% CDA), and C3 (150% CDA). Composites were manufactured by cold-press molding under a two-ton compressive load. Characterization included tensile, flexural, and impact testing, thermogravimetric analysis (TGA), thermal conductivity, apparent density, liquid absorption, and morphological assessment by scanning electron microscopy (SEM). CDA incorporation reduced tensile and flexural strength but increased elastic modulus, impact toughness, and thermal conductivity. The C3 composite exhibited the highest thermal stability, retaining more than 50% of its initial mass at 500 °C. Density and liquid absorption increased proportionally with filler loading, and SEM revealed heterogeneous microstructures with particle agglomeration, sedimentation, and interfacial gaps, explaining the mechanical and thermal trends. The findings demonstrate the feasibility of producing dense and low-cost polyester composites reinforced with steel scale. The structure–property relationships identified in this study establish a foundation for subsequent investigations focusing on additional functional behaviors of this waste-derived material system.

29 May 2026 in ECS Sensors Plus
Verified
Journal Article
Open access
Leonardo Souza CairesLeonardo Souza Caires
Leonardo Souza Caires
RLRonaldo da Maceno Lima
Ronaldo da Maceno Lima
Polyane Alves SantosPolyane Alves Santos
Polyane Alves Santos
Elvio Prado SilvaElvio Prado Silva
Elvio Prado Silva
Ruy Alberto Corrêa AltafimRuy Alberto Corrêa Altafim
Ruy Alberto Corrêa Altafim
RMRui A.S. Moreira
Rui A.S. Moreira
This study presents the morphological and elemental characterization of the tubular structure of thermoformed piezoelectrets with open voids. The thermoformed structures were analyzed without applying the metallized layers required for electrical charging and piezoelectric measurements. Four samples were investigated: two single-layer thermoformed piezoelectret (SLTP) samples with channel widths of 2 mm and 3 mm , and two thermoformed magneto-piezoelectret (TMP) samples with geometries corresponding to those of the SLTP samples. The samples were prepared by pressure thermoforming (250 ∘ C for 15 s ) of fluorinated ethylene propylene (FEP) films using polytetrafluoroethylene (PTFE) templates. In the TMP samples, a self-adhesive magnetic layer (300 μm thick) was incorporated before the final sealing step by applying an additional layer of FEP on top of the layered assembly. Cross-sectional scanning electron microscopy (SEM) revealed the regular formation of tubular channels, the integrity of the interfaces, and the slight dimensional variations associated with the channel geometry. Energy-dispersive X-ray spectroscopy (EDS) confirmed elemental signatures consistent with FEP and magnetic layer inclusions, with no evidence of external contamination. The results demonstrated the morphological and compositional stability of the structures produced and indicated that wider geometries may require adjustments to the thermoforming parameters to optimize the interlayer cohesion. The results provide relevant structural and compositional parameters for improving the design and quality control of thermoformed piezoelectrets with and without magnetic components.

16 May 2026 in Sensors and Actuators A: Physical
Verified
Journal Article
Open access
Leonardo Souza CairesLeonardo Souza Caires
Leonardo Souza Caires
Polyane Alves SantosPolyane Alves Santos
Polyane Alves Santos
RLRonaldo da Maceno Lima
Ronaldo da Maceno Lima
Elvio Prado SilvaElvio Prado Silva
Elvio Prado Silva
Amélia Moreira SantosAmélia Moreira Santos
Amélia Moreira Santos
Ruy Alberto Corrêa AltafimRuy Alberto Corrêa Altafim
Ruy Alberto Corrêa Altafim

9 March 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
Leonardo Souza CairesLeonardo Souza Caires
Leonardo Souza Caires
RMRui A.S. Moreira
Rui A.S. Moreira
Polyane Alves SantosPolyane Alves Santos
Polyane Alves Santos
RLRonaldo da Maceno Lima
Ronaldo da Maceno Lima
Elvio Prado SilvaElvio Prado Silva
Elvio Prado Silva
Ruy Alberto Corrêa AltafimRuy Alberto Corrêa Altafim
Ruy Alberto Corrêa Altafim
This study presents a statistical characterization of the piezoelectric response in Thermoformed Magneto-Piezoelectret Sensors (TMPs) under varying excitation frequencies. A 144-point Laser-Doppler vibrometry mapping was performed to evaluate the spatial distribution of the piezoelectric coefficient d33 in structurally distinct regions, namely, air-filled channels and solid valleys. Statistical metrics, including mean, standard deviation, coefficient of variation, and interquartile range, were used to evaluate the functional variability and stability of the sensors at 50 Hz, 5.8 kHz, 12 kHz and 20 kHz. The results revealed consistently higher d33 values and greater dispersion in the channel regions, while the valleys exhibited lower variability and more stable response. Frequency-dependent patterns of asymmetry and localized amplification were observed, indicating the combined influence of geometry and excitation regime on electromechanical behavior, which may also suggest the effect of the presence of local mode shapes of the polymeric structure of the TMP. This multivariate statistical approach provides valuable information on design refinement, spatial calibration strategies, and quality control for advanced piezoelectret-based devices. The findings support the development of high-sensitivity geometrically optimized transducers for use in multifunctional sensing applications.