Before starting the restoration of an artwork, good practice involves the evaluation of the item healthiness possibly carried out through non-invasive techniques. In the specific case of painting inspection, hyper- and multi- spectral techniques are commonly used to analyze the outer layers (varnish, pictorial, and drawing), while X-ray, tomography, and many others can be employed to investigate its inner structure. Although highly desirable, a single technique providing all the information about a painting is still not available. Thus, it is of great interest to define the analysis’ protocols that could optimally exploit the complementarities of a minimal set of techniques. To this aim, the present paper shows the combined use of the hypercolorimetric multispectral imaging and pulse-compression thermography on a 15th century wall painting attributed to the Italian artist Antonio del Massaro, also known as Pastura, representing the Madonna with the Child and the Saints Jerome and Francis. The capabilities and the complementarities of the two techniques, whose information can also be fused through post-processing, are illustrated in detail in this paper. In addition, a false-colour imaging approach is proposed to improve the readability and analysis of the thermography results.

The aim of this work is to present a new practical approach to digital photogrammetry to obtain 3D models of polychromatic sculptures under ultraviolet fluorescence and near-infrared by starting from photographic images. This digital photogrammetry was applied recently to a 17th-century reliquary bust representing St. Rodonio, a saint particularly venerated by the Orthodox Church, presently under restoration in the Laboratories of University of Tuscia and belonging to the Museum of Colle del Duomo of Viterbo (Italy). The acquisitions of ultraviolet fluorescence and infrared frames were performed using a Nikon D5300 digital SLR camera and a modified low-cost digital camera (Samsung Model NX3300), respectively. The three-dimensional UV and IR models were obtained using Agisoft PhotoScan^® software. The generated ultraviolet 3D model of the bust makes visible, in a single file, the fluorescence induced by UV radiation on the entire sculpture, highlighting surface abrasions, organic dyes, and ancient protective features. The infrared 3D model allowed for better definition of the details of the drawing used for eyes, nose and mouth definition. In conclusion, the ultraviolet fluorescence and IR 3D models of Saint Rodonio were particularly useful as documentation tools for the conservation status and for the painting construction, allowing us to perfectly map the original and restoration materials and to detect the drawing in single dynamic 3D files following a totally non-invasive, cost-effective, and rapid approach.

In this paper, two different objects from the ethnographic collection of the museum of the Congregation of the Sacred Hearts of Jesus and Mary (Rome), a Polynesian barkcloth (tapa) and a Polynesian headdress in feathers (pa’e ku’a), were investigated to characterize the materials, to evaluate their state of conservation and address the restoration activities. Imaging methods such as multispectral imaging, 3D ultraviolet induced fluorescence and scanning electron microscopy have been integrated with analytical techniques such as X-ray fluorescence spectroscopy, Fourier transform infrared and surface enhanced Raman spectroscopy. Imaging investigations allowed us to differentiate constitutive materials and study their distribution, such as the yellow dye in the tapa used to trace the geometrical pattern and the psittacofulvins responsible for the feathers’ colors in the headdress. The combination of molecular spectroscopy, supported by observation under a scanning electron microscope, allowed us to propose a characterization of the organic painting materials (Morinda citrifolia, Curcuma longa) used for the tapa, and of the type of feathers (from Vini kuhlii bird) and vegetal fibers (Cocos nucifera L.) used to realize the headdress, as well as enabling the identification of degradation products and microorganisms affecting the artifacts before restoration. Fourier transform infrared spectroscopy detected the organic materials used as adhesives for the tapa and headdress: a polysaccharide, probably starch, for the tapa and a natural rubber from Cerbera manghas L. for the headdress. The results of the multi-analytic diagnostic campaign enabled the choice of proper restoration materials, compatible with the original ones, and helped us develop effective protocols for the artifacts’ conservation, such as laser cleaning of the feathers.

As part of the study project of the pictorial cycle, attributed to Saturnino Gatti, in the church of San Panfilo at Villagrande di Tornimparte (AQ), image analyses were performed in order to document the general conservation conditions of the surfaces, and to map the different painting materials to be subsequently examined using spectroscopic techniques. To acquire the images, radiation sources, ranging from ultraviolet to near infrared, were used; analyses of ultraviolet fluorescence (UVF), infrared reflectography (IRR), infrared false colors (IRFC), and optical microscopy in visible light (OM) were carried out on all the panels of the mural painting of the apsidal conch. The Hypercolorimetric Multispectral Imaging (HMI) technique was also applied in selected areas of two panels. Due to the accurate calibration system, this technique is able to obtain high-precision colorimetric and reflectance measurements, which can be repeated for proper surface monitoring. The integrated analysis of the different wavelengths’ images—in particular, the ones processed in false colors—made it possible to distinguish the portions affected by retouching or repainting and to recover the legibility of some figures that showed chromatic alterations of the original pictorial layers. The IR reflectography, in addition to highlighting the portions that lost materials and were subject to non-original interventions, emphasized the presence of the underdrawing, which was detected using the spolvero technique. UVF photography led to a preliminary mapping of the organic and inorganic materials that exhibited characteristic induced fluorescence, such as a binder in correspondence with the original azurite painting or the wide use of white zinc in the retouched areas. The collected data made it possible to form a better iconographic interpretation. Moreover, it also enabled us to accurately select the areas to be investigated using spectroscopic analyses, both in situ and on micro-samples, in order to deepen our knowledge of the techniques used by the artist to create the original painting, and to detect subsequent interventions.

This paper provides the results of a 3D photogrammetric survey of the apsidal conch of St. Panfilo Church in Tornimparte (L’Aquila, Italy). The images were acquired and then processed in order to obtain a three-dimensional model available on Sketchfab platform. The five panels and the vault of the apsidal conch were exported from the 3D model as orthomosaics and then imported into CAD software for the mapping of the main degradation phenomena. The examined surface was almost entirely covered by mural painting and restoring mortars, the latter mainly located in the lower part of the apsidal conch. The whole surface of the apsidal conch was also examined by means of raking light that enabled highlighting of conservation problems and the presence of incision marks and giornata/pontate boundaries indicating the use of the fresco painting technique. Several degradation phenomena, attributable both to the executive technique of wall painting and the microclimate conditions, could be observed. According to the overlapping of weathering forms and the material involved, most of the examined surfaces exhibited moderate to very severe degradation.

This research concerns the application of micro X-ray fluorescence (µXRF) mapping to the investigation of a group of selected metal objects from the archaeological site of Ferento, a Roman and then medieval town in Central Italy. Specifically, attention was focused on two test pits, named IV and V, in which metal objects were found, mainly pertaining to the medieval period and never investigated before the present work from a compositional point of view. The potentiality of µXRF mapping was tested through a Bruker Tornado M4 equipped with an Rh tube, operating at 50 kV, 500 μA, and spot 25 μm obtained with polycapillary optics. Principal component analysis (PCA) and multivariate curve resolution (MCR) were used for processing the X-ray fluorescence spectra. The results showed that the investigated items are characterized by different compositions in terms of chemical elements. Three little wheels are made of lead, while the fibulae are made of copper-based alloys with varying amounts of tin, zinc, and lead. Only one ring is iron-based, and the other objects, namely a spatula and an applique, are also made of copper-based alloys, but with different relative amounts of the main elements. In two objects, traces of gold were found, suggesting the precious character of these pieces. MCR analysis was demonstrated to be particularly useful to confirm the presence of trace elements, such as gold, as it could differentiate the signals related to minor elements from those due to major chemical elements.