Lucas Matheus Caldas Vicente Lopes

Mr. Lucas Matheus Caldas Vicente Lopes

Civil Engineering, University of Minho, Guimarães, Braga, Portugal
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2023 in Polymers
Verified
Journal Article
Open access
PDF file
Lucas Matheus Caldas Vicente LopesLucas Matheus Caldas Vicente Lopes
Lucas Matheus Caldas Vicente Lopes
DRDaniel Reis
Daniel Reis
Adilson Campos Paula JuniorAdilson Campos Paula Junior
Adilson Campos Paula Junior
Manuela AlmeidaManuela Almeida
Manuela Almeida
This study aims to evaluate the thermal and mechanical performances of PET-G thermoplastics with different 3D microstructure patterns and infill densities. The production costs were also estimated to identify the most cost-effective solution. A total of 12 infill patterns were analysed, including Gyroid, Grid, Hilbert curve, Line, Rectilinear, Stars, Triangles, 3D Honeycomb, Honeycomb, Concentric, Cubic, and Octagram spiral with a fixed infill density of 25%. Different infill densities ranging from 5% to 20% were also tested to determine the best geometries. Thermal tests were conducted in a hotbox test chamber and mechanical properties were evaluated using a series of three-point bending tests. The study used printing parameters to meet the construction sector’s specific needs, including a larger nozzle diameter and printing speed. The internal microstructures led to variations of up to 70% in thermal performance and up to 300% in mechanical performance. For each geometry, the mechanical and thermal performance was highly correlated with the infill pattern, where higher infill improved thermal and mechanical performances. The economic performance showed that, in most cases, except for the Honeycomb and 3D Honeycomb, there were no significant cost differences between infill geometries. These findings can provide valuable insights for selecting the optimal 3D printing parameters in the construction industry.

21 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Lucas Matheus Caldas Vicente LopesLucas Matheus Caldas Vicente Lopes
Lucas Matheus Caldas Vicente Lopes
HDHarish Daruari
Harish Daruari
PMPaulo Mendonca
Paulo Mendonca
Manuela AlmeidaManuela Almeida
Manuela Almeida
Marine plastic pollution represents a critical environmental challenge, with millions of tons of plastic waste entering the oceans annually and threatening ecosystems, biodiversity, and human health. This systematic review evaluates the current state of the art in recycling and reusing marine plastic waste within the architecture, engineering, and construction (AEC) sectors, following the PRISMA methodology. Sixty-six peer-reviewed articles published between 2015 and 2025 were analysed, focusing on the integration of plastic waste. The review identifies mechanical recycling as the predominant method, involving washing and shredding plastics into fibres or flakes for use in cementitious composites, asphalt modifiers, bricks, panels, and insulation. Results indicate that recycled plastics, such as PET, HDPE, and PP, can enhance thermal insulation, water resistance, and flexural strength in non-structural applications. However, challenges persist regarding compressive strength, fibre dispersion, and chemical compatibility with cementitious matrices. Although the reuse of marine plastics supports circular economy goals by diverting waste from oceans and landfills, significant gaps remain in long-term durability, microplastic release, end-of-life recyclability, and comprehensive environmental assessments. The findings underscore the need for further research on the broader adoption of life cycle analysis, as well as long-term durability and environmental contamination analyses.

4 November 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
DRDaniel Reis
Daniel Reis
ADAnita Tan De Domenico
Anita Tan De Domenico
Lucas Matheus Caldas Vicente LopesLucas Matheus Caldas Vicente Lopes
Lucas Matheus Caldas Vicente Lopes
Manuela AlmeidaManuela Almeida
Manuela Almeida
As a crucial step in addressing the climate emergency and enhancing energy security, the European Union has set ambitious targets to decarbonise its economy by 2050. While the building sector plays a pivotal role in this transition, being accountable for 36% of the EU’s total carbon emissions, it shows a renovation rate below 1% per year, which is clearly insufficient. To address this challenge, this study uses the cost-optimal methodology from private and social perspectives to assess the cost-effectiveness and environmental impact of five renovation packages with passive and active solutions currently available on the Portuguese market. The results demonstrated that from both perspectives, optimal combinations of market solutions were generally cost-effective and could lead to a 90–99% reduction in energy needs and even to zero carbon levels. Nevertheless, beyond cost-effectiveness, consideration of co-benefits, e.g., social and health improvements, is also crucial, requiring government action. To drive these essential changes, effective policy measures are imperative. Recommendations encompass robust regulatory frameworks, financial support mechanisms, knowledge dissemination, and a shift towards broader-scale renovation. For carbon reduction to be economically attractive, fostering innovative business models and leveraging legal instruments to tackle complex scenarios are needed.

5 March 2024 in Sustainability
Verified
Journal Article
Open access
Lucas Matheus Caldas Vicente LopesLucas Matheus Caldas Vicente Lopes
Lucas Matheus Caldas Vicente Lopes
LPLuca Penazzato
Luca Penazzato
DRDaniel C. Reis
Daniel C. Reis
Manuela AlmeidaManuela Almeida
Manuela Almeida
Daniel OliveiraDaniel Oliveira
Daniel Oliveira
PLPaulo B. Lourenço
Paulo B. Lourenço
This paper introduces a novel modular retrofitting solution to enhance the energy efficiency and seismic resilience of building façades, particularly within the Portuguese context. In the context of Europe’s “Renovation Wave” strategy, and as a product of the nationally funded ZeroSkin+ project, the proposed renovation solution addresses the urgent need for sustainable building renovations to help mitigate climate change and meet European climate neutrality goals by 2050. Unlike traditional methods that often rely on non-eco-friendly materials without integrating seismic and thermal performances, the renovation solution leverages fused deposition modelling (FDM) 3D printing technology to introduce a dual-layered panel system. This system features a durable, UV-resistant PET-G thermoplastic outer layer and a cork interior to ensure additional thermal insulation. The integrated renovation solution shows a 42% improvement in seismic reinforcement’s out-of-plane capacity and achieves U-values as low as 0.30 W/m2·K, exceeding Portugal’s thermal efficiency standards (0.35 to 0.50 W/m2·K). The proposed renovation solution also embraces circular economy principles, emphasising waste reduction and recyclability.

1 June 2023 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
Lucas Matheus Caldas Vicente LopesLucas Matheus Caldas Vicente Lopes
Lucas Matheus Caldas Vicente Lopes
MAM Almeida
M Almeida
DRD Reis
D Reis
The thermal performance of a building is highly dependent on the heat transmission through the envelope. On the other hand, additive manufacturing has been increasingly used in several industrial applications due to its possibility to produce complex structures. However, most studies of the 3d printing process focused on mechanical performance. This study aims to evaluate how the internal 3D-printed microstructure affects thermal performance. Twelve infill patterns were analysed, including Gyroid, Grid, Hilbert curve, Line, Rectilinear, Stars Triangles, 3D Honeycomb, Honeycomb, Concentric, Cubic, and Octagram spiral. Using fused deposition modelling (FDM), the samples were printed with polyethene terephthalate-glycol (PET-G) thermoplastic filaments. Thermal tests were conducted using a calibrated hotbox, following the recommendations of ASTM C1363-11:2014. The results obtained show a variation of 70% by changing the internal microstructure using fix infill density of 25%. Concentric, Gyroid and Hilbert curve achieved the best thermal insulation properties.

1 September 2025 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
Lucas Matheus Caldas Vicente LopesLucas Matheus Caldas Vicente Lopes
Lucas Matheus Caldas Vicente Lopes
MAManuela Almeida
Manuela Almeida
The built environment accounts for a substantial portion of global resource consumption, and the drive to renovate existing buildings for zeroemission performance is expected to further increase material demand. Simultaneously, plastic pollution remains a critical ecological challenge. Integrating plastic waste into construction materials offers a promising strategy to mitigate environmental impacts, promote recycling, and advance material circularity. This study investigates the development and thermal performance of a 3D-printed insulation panel fabricated from PET plastic with a design compatible with recycled materials. The panel features a 3D-printed PET structure with internal cavities that can be filled with recycled HDPE, leveraging both the design flexibility of additive manufacturing and air and plastic infill insulating properties. Thermal performance was evaluated using the standardised hotbox method, and results demonstrate that the panel achieves competitive U-values of 0.46 W/(m2K) and 0.35 W/(m2K) for the empty and plastic waste-filled samples, respectively. Overall, the findings highlight the potential for 3D-printed plastic panels to enhance building energy efficiency while diverting plastic waste from the environment and contributing to sustainable building renovation.