Luis Marcelo López-López

Dr. Luis Marcelo López-López

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2013 in INGENIUS
Verified
Journal Article
Open access
Jorge I. FajardoJorge I. Fajardo
Jorge I. Fajardo
LVLuis Valarezo
Luis Valarezo
LLLuis Marcelo López-López
Luis Marcelo López-López
ASAndrés Sarmiento
Andrés Sarmiento
Esta revisión presenta los reportes de las investigaciones relacionadas con el desarrollo de nuevos materiales compuestos poliméricos reforzados con fibras naturales y desechos agroindustriales provenientes del Ecuador. Se analizan las fibras vegetales con potencial para ser empleadas como reforzante en compuestos poliméricos. Se sintetizan los resultados relevantes de las diferentes investigaciones analizadas. Aspectos como el tipo de matriz, la morfología de las fibras, los tratamientos superficiales y las propiedades mecánicas son presentados.

27 November 2025 in Polymers
Verified
Journal Article
Open access
PDF file
CCChristian Cobos
Christian Cobos
SFSantiago Ferrandiz
Santiago Ferrandiz
EEEmilio Rayón Encinas
Emilio Rayón Encinas
LLLuis Marcelo López-López
Luis Marcelo López-López
LGLuis Garzón
Luis Garzón
Polylactic acid (PLA) is a biodegradable polymer with an ever-increasing number of applications, although its inherent brittleness limits its performance somewhat in structural applications. In this study, we analysed the influence of incorporating multi-walled carbon nanotubes (MWCNTs) and halloysite nanotubes (HNTs) at different concentrations (0.5, 0.75 and 1 wt%) on the mechanical properties of injection-moulded PLA nanocomposites. The effects of the nanofillers were characterised by tensile, flexural, and impact tests, hardness measurements, and FESEM examination. The results showed that MWCNTs increased the flexural strength and stiffness by up to 60% compared to neat PLA (84.3 vs. 52.6 MPa), although this was accompanied by a reduction in elongation at break (from 2.30% to 1.57%) due to agglomeration. Conversely, HNTs improved the elongation at break up to 6.39%, enhanced flexural strength by approximately 62% (85.1 MPa), and maintained stiffness around 3.0 GPa, indicating a better balance between strength and ductility. The FESEM micrographs confirmed the presence of clusters in MWCNTs and a more homogeneous dispersion in HNTs, thus explaining the differences in behaviour. Overall, MWCNTs are more suitable for applications requiring high stiffness and strength, whereas HNTs are preferable when greater ductility and impact resistance are required.

1 April 2022 in Revista UIS Ingenierías
Verified
Journal Article
Open access
PDF file
EBEudi Blanco-Sánchez
Eudi Blanco-Sánchez
AMAdolfo Madera-Mujica
Adolfo Madera-Mujica
MPMarcial Pérez-Castillo
Marcial Pérez-Castillo
Jorge I. FajardoJorge I. Fajardo
Jorge I. Fajardo
EREdwuin J. Carrasquero R.
Edwuin J. Carrasquero R.
LRLUIS JAVIER CRUZ RIAÑO
LUIS JAVIER CRUZ RIAÑO
In the present investigation, the effects of fiber content (20, 30 and 40 wt%) and annealing heat treatment on the thermal properties of the biocomposite material formed by an isotactic polypropylene polymeric matrix (iPP) reinforced with short bamboo fibers (PP/BF) were studied. The coupling agent was iPP with grafting of maleic anhydride molecules (MAPP). The Differential Scanning Calorimetry (DSC) technique was used to determine the melting temperature (Tm), crystallization temperature (Tc), and degree of crystallinity (Xc) of the biocomposites. The melting temperature of pure PP was not significantly affected by the presence of bamboo fibers. However, the degree of crystallinity of PP increased with fiber content. The annealing heat treatment caused an increase in the Tm of pure PP and PP/BF. The composite with 20 wt% fiber content (PP/20F) annealed achieved the highest Xc (37,47 %). The Tc of polypropylene increased with the presence of fibers, and the PP/20F composite reached the highest value (115 degrees C). Also, the study of the Tm of the biocomposites in amorphous state was carried out, and it was observed that the sample with a fiber content of 30 wt% presented an endothermic peak at a temperature of approximately 168 degrees C.

1 October 2019 in Ingeniería Investigación y Tecnología
Verified
Journal Article
Open access
EREdwuin J. Carrasquero R.
Edwuin J. Carrasquero R.
JMJaime Moises Minchala Marquino
Jaime Moises Minchala Marquino
BRByron Ramiro Romero Romero
Byron Ramiro Romero Romero
LLLuis Marcelo López-López
Luis Marcelo López-López
Jorge I. FajardoJorge I. Fajardo
Jorge I. Fajardo
The knowledge of the mechanical properties of any material subjected to loads is necessary for its use in structural applications. Silicon nitride (Si3N4) ceramics are well-known materials used in engineering applications due to their outstanding combination of high strength and fracture toughness. The most studied mechanical properties of Si3N4 are hardness, fracture toughness and mechanical resistance. Recent advances in the production processes that incorporate high purity rare earth elements as sintering additives have improved these mechanical properties. Using Vickers indentation method, the elastic module and fracture toughness of Si3N4 based materials modified with La2O3, Y2O3 and Al2O3 were determined as a function of the cracking system type that prevails under the effect of load. The results indicate that adding rare earth to the matrix increased the fracture toughness the Si3N4 base ceramic Samples containing La2O3+Y2O3 showed higher values of fracture toughness than the ones with Al2O3+La2O3, regardless of the equation used in the calculations. Meanwhile the elastic module decrease approximately 100 GPa for both types of nitrides by the effect of the temperature.

30 June 2013 in INGENIUS
Verified
Journal Article
Open access
LLLuis Marcelo López-López
Luis Marcelo López-López
ASAndrés Sarmiento
Andrés Sarmiento
JFJorge Fajardo
Jorge Fajardo
LVLuis Valarezo
Luis Valarezo
RGRobin Zuluaga Gallego
Robin Zuluaga Gallego

6 January 2022 in INGENIUS
Verified
Journal Article
Closed access
PDF file
Jimmy Ricardo Brito MorochoJimmy Ricardo Brito Morocho
Jimmy Ricardo Brito Morocho
MAMarco Amaya
Marco Amaya
LLLuis Marcelo López-López
Luis Marcelo López-López
Fabricio EspinozaFabricio Espinoza
Fabricio Espinoza
Este estudio presenta un análisis de colisiones de impacto frontal y volcamiento lateral de un autobús de dos pisos, conforme al Reglamento 66 y 29 de la Comisión Económica de las Naciones Unidas para Europa (UN/ECE), y el Servicio Ecuatoriano de Normalización (INEN) con su normativa 1323:2009, encargado de regular los autobuses para el transporte de pasajeros en el Ecuador. En la actualidad la mejora constante de la seguridad activa y pasiva de los autobuses con respecto a los accidentes es un tema de gran impacto social. En este contexto se analiza la colisión de un autobús de dos pisos aplicando el método de elementos finitos (MEF), el cual es sometido a diferentes escenarios de colisión como es de un impacto frontal y un volcamiento lateral, con la finalidad de estudiar los efectos de un accidente de este tipo de estructuras donde la normativa no es específica para esta clase de vehículos. Los resultados obtenidos permiten tener en cuenta consideraciones importantes al momento del diseño de estos elementos.