The removal of the electrolyte solvents in an early-stage thermal drying step is crucial for safe and efficient recycling processes for end-of-life lithium-ion batteries. A comprehensive understanding of the governing influences on the solvent volatilization during the drying step enables optimized processes. The initial phase of this process is of particular interest because, due to the high spatial accessibility of the solvent, drying is determined by the mass transport in the surrounding gas phase, which can be precisely controlled through the process boundary conditions. In this study, the evaporation of representative binary and ternary electrolyte–solvent mixtures containing linear and cyclic organic carbonates is investigated under defined boundary conditions. The evaporation kinetics and selectivity are assessed by time-discrete measurement of the amount of solvent and its composition during the evaporation experiments. At the conditions applied, the vapor pressure of the solvents governs the evaporation selectivity, with the evaporation kinetics dictated by the mass transport of the solvent vapor in the gas phase. Hence, the evaporation of highly mobile but low volatile solvents, such as ethylene carbonate (EC), is the constraining aspect within this process. Moreover, molecular interactions within mixtures can further hinder the volatilization of EC. The developed simulation model describes the evaporation behavior with high accuracy and thus allows the prediction of minimum drying times. It establishes a solid foundation for designing and scaling the drying processes of end-of-life batteries, which involve complex material interactions.
To achieve the goal of sustainable and competitive production of battery electrodes, the integration of recycling approaches into the product life cycle is becoming increasingly important. In addition to the fixed recycling quotas for end-of-life batteries, which are legally stipulated for the future, production scrap also plays a decisive role.Production scrap is a result of quality requirements, which are directly correlated to production parameters. As a result, up to 40% of the material used in battery cell production is scrap, which also needs to be recycled to close the value chain. Currently, there are two established processes for recycling the functional materials of lithium ion batteries (LIBs), namely pyrometallurgical and hydrometallurgical recycling. An alternative process, which is not yet established due to the complexity of the physical and chemical relationships, is direct battery recycling. This function-preserving recycling enables a direct return to the LIBs value chain while simultaneously processing the materials in an environmentally friendly and resource-saving manner. Therefore, this paper presents technological approaches in the form of a process chain for the direct recycling of active materials (lithium iron phosphate and graphite) in order to significantly improve the battery sustainability. Anode layers with defined structural properties are treated in the process chain consisting of decoating, dispersing and thickening.Initial tests have looked at two different decoating methods. The mechanical removal of anode active material from the collector foil using brushes and removal in a high-power ultrasonic bath are demonstrated. Furthermore, the process for the preparation of the recyclate is presented. This involves dispersing the decoated material to break up large agglomerates. Finally, the anode suspension is thickened so that the concentrate has the same solids concentration as a newly produced paste.