Stabilization of polymer nanocomposites in aqueous environment with high salinity has been a constant challenge for their applications. This work aimed to improve the stability of graphene oxide (GO) polyacrylamide nanocomposites at high-temperature and high-ionic-strength brines. GO was synthesized via a modified Hummers’ method and the copolymer of acrylamide (COPAM) was obtained via free-radical polymerization. The covalent functionalization of COPAM with the partially reduced GO (rGO) was successfully achieved. 1,3-Propane sultone was used to further functionalize the obtained rGO–COPAM composites to accomplish the zwitterionic character on the rGO–COPAM surface to get a material with excellent temperature stability and dispersibility in the presence of high ionic strength brines. The synthesized materials were characterized by 1H NMR, gel permeation chromatography, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy analysis, and so forth. The thermal stability of the dispersion at 80 °C for 120 days was observed by visual inspection and spectroscopic analysis. The results showed that the zwitterionic polymer produced excellent brine stability with GO nanosheets and suggested promising applications of zwitterionic polyacrylamide–GO systems especially for enhanced oil recovery.
The wide spread of phenols and their toxicity in the environment pose a severe threat to the existence and sustainability of living organisms. Rapid detection of these pollutants in wastewaters has attracted the attention of researchers from various fields of environmental science and engineering. Discoveries regarding materials and method developments are deemed necessary for the effective detection and remediation of wastewater. Although various advanced materials such as organic and inorganic materials have been developed, secondary pollution due to material leaching has become a major concern. Therefore, a natural-based material is preferable. Clay is one of the potential natural-based sorbents for the detection and remediation of phenols. It has a high porosity and polarity, good mechanical strength, moisture resistance, chemical and thermal stability, and cation exchange capacity, which will benefit the detection and adsorptive removal of phenols. Several attempts have been made to improve the capabilities of natural clay as sorbent. This manuscript will discuss the potential of clays as sorbents for the remediation of phenols. The activation, modification, and application of clays have been discussed. The achievements, challenges, and concluding remarks were provided.
Elastic turbulence, which is sensitive to geometry and polymer rheology, has shown great potential for improving the performance of mixing, heat transfer, and even oil recovery. Recent studies showed the importance of the rheological properties of polymer solutions on the onset of elastic turbulence. However, variations of rheological properties based on polymer sensitivities such as salinity and its corresponding effects on the elastic turbulence have not been revealed. This work investigated systematically the effects of salinity on the onset of elastic turbulence in both swirling flow and curvilinear microchannels. The variations of statistical properties, such as probability distribution functions (PDFs) and power spectral density of injected power (PSD), were analyzed for characterization. The onset conditions of elastic turbulence are postponed by high salinity, which is consistent with the mixing performance in a curvilinear microchannel. A salinity independent power-law exponent at a value of −4.3 is observed in a fully developed elastic regime for all polymer solutions. Particularly, the diffusion of fluorescein at a low flow rate in the microchannel is possible due to the existence of a steady secondary flow before the onset of elastic instability.