A systematic investigation of the photocatalytic activity (PCA) of nanostructured ZnO films showed how this is directly affected by the films’ morphology at different scales, from the macroscale morphology of films (e.g. thickness and surface area), to the microscale feature arrangement (e.g. aligned vs. randomly oriented structures or interpenetrated ones), to the nanoscale structure (e.g. crystal size and orientation). The interest in immobilizing photocatalysts in water treatment stems from concerns about the potential toxicity of their slurry form, which requires expensive downstream removal. Immobilisation, though, leads to a reduction in PCA, generally attributed to a lower surface area. By reducing the films’ feature size to the nanoscale, an immobilized photocatalyst with high surface area can be achieved. At this scale, however, feature structuring and morphology become important as they determine the interaction between light and the photocatalytic material. In this work, nanostructured ZnO films with different morphology, arrangement and structure were produced by electrochemical anodization of zinc and were tested using the degradation of phenol in a batch reactor as a model system. Results show that the PCA for immobilized catalysts can be optimised by controlling microscale arrangement (light absorbance capacity) and nanoscale structure (crystal size and orientation) rather than macroscale morphology (surface area). These results provide a clear direction to maximising the photocatalytic activity of immobilised photocatalysts for the removal of organic pollutants from water.
25 May 2018 in Journal of Agricultural and Food Chemistry
Heterojunctions based on metal halide perovskites (MHPs) are promising systems for the photocatalytic hydrogen evolution reaction (HER). In this work, we coupled Cs3Bi2Br9 nanocrystals (NCs), obtained by wet ball milling synthesis, with g-C3N4 nanosheets (NSs), produced by thermal oxidation of bulk g-C3N4, in air. These methods are reproducible, inexpensive and easy to scale up. Heterojunctions with different loadings of Cs3Bi2Br9 NCs were fully characterised and tested for the HER. A relevant improvement of H2 production with respect to pristine carbon nitride was achieved at low NCs levels reaching values up to about 4600 µmol g−1 h−1. This work aims to provide insights into the synthesis of inexpensive and high-performing heterojunctions using MHP for photocatalytic applications.
This work evaluates the efficiency of three biochar samples toward the adsorption of manganese, iron, and selenium present in a sample of urban wastewater. The biochar was produced from the pyrolysis of rice husks at 350 °C for 6 h (RHB) and subsequently modified using HCl (RHBHCl) or NaOH (RHBNaOH) to increase its surface area. The RHBNaOH sample exhibited the highest removal efficiency for the three metals. The metals’ adsorption removal efficiency for RHBNaOH was in the order Mn (76%), Se (66%), and Fe (66%), while for RHBHCl, it was Fe (59%), Mn (30%), and Se (26%). The results show that the as-prepared RHB can remove the metals, even if in low amounts (Fe (48%), Mn (3%), and Se (39%)). The adsorption removal for the three types of adsorbents follows the Langmuir isotherm model. Pseudo-first-order and pseudo-second-order models were used to determine the adsorption mechanism for each of the three adsorbents. Both models showed a good fit with R2 (>0.9) for the RHBNaOH and RHB sorption of Fe, Mn, and Se. Overall, this work demonstrates the potential of biochar for the removal of metals from real wastewater.
This study investigates the design and development of a pyrolysis reactor for batch-type biochar production from rice husks. The main objective is to develop an appropriate technology to regulate pyrolysis temperature and biomass residence time that can be easily operated under field and household conditions with minimal operational and technical requirements. The designed novel dual-chamber reactor comprises two concentrical metal cylinders and a syngas circulation system. The outer cylinder is for energy generation and the inner one is for pyrolysis. Temperature profiles, energy exchanges, syngas production, and the physicochemical characteristics of biochar were obtained to determine the performance of the reactor. Different trials were carried out to obtain different pyrolysis temperatures under constant amounts of feedstock and fuel. The temperature was monitored continuously at three predetermined reactor heights, the temperature profile varied from 380 °C to 1000 °C. The biochar yield was 49% with an average production rate of 1.8 ± 0.2 kg h−1. The reactor consumed 11 ± 0.1 kg of rice husk as feedstock and 6 ± 1 kg h−1 of wood as fuel. The gaseous products from the pyrolysis were CH4, CO2, H2, CO, and CnHm, which contributed 23.3 ± 2.3 MJ m−3 of energy as fuel for the pyrolysis process. The specific surface area of the biochar was 182 m2 g−1. The achieved operational capacity and thermal efficiency of the reactor show biochar production is a suitable option to convert discarded biomass into a value-added product that can potentially be used in several environmental applications.
21 April 2020 in Industrial & Engineering Chemistry Research