María J. Martínez-Carreón

Dr. María J. Martínez-Carreón

Facultad de Ciencias Físico Matemáticas, Universidad Autónoma de Nuevo León, San Nicolás de los Garza, Nuevo León, Mexico
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 January 2019 in Materials Research Express
Verified
Journal Article
Closed access
PDF file
María J. Martínez-CarreónMaría J. Martínez-Carreón
María J. Martínez-Carreón
FSFrancisco Solis-Pomar
Francisco Solis-Pomar
AFAbel Fundora
Abel Fundora
CLClaudio Davet Gutiérrez Lazos
Claudio Davet Gutiérrez Lazos
JHJorge Luis Hernández-Pinero
Jorge Luis Hernández-Pinero
EPEduardo Perez
Eduardo Perez

18 June 2025 in Materials
Verified
Journal Article
Open access
PDF file
DADylan Antonio Huerta Arteaga
Dylan Antonio Huerta Arteaga
MRMitchel Abraham Ruiz-Robles
Mitchel Abraham Ruiz-Robles
SRIVATHSAVA SURABHISRIVATHSAVA SURABHI
SRIVATHSAVA SURABHI
SSShiva Samhitha Saireddy
Shiva Samhitha Saireddy
SGSanthosh Girish
Santhosh Girish
EPEduardo Perez
Eduardo Perez
Nickel (Ni) ultrathin films exhibit phase-dependent electrical, magnetic, and optical characteristics that are significantly influenced by deposition methods. However, these films are inherently prone to rapid oxidation, with the oxidation rate dependent on substrate, temperature, and deposition parameters. The focus of this research is to investigate the temporal oxidation of RF-sputtered Ni ultrathin films on Corning glass under ambient atmospheric conditions and its impact on their structural, surface, and optical characteristics. Controlled film thicknesses were achieved through precise manipulation of deposition parameters, enabling the analysis of oxidation-induced modifications. Atomic force microscopy (AFM) revealed that films with high structural integrity and surface uniformity are exhibiting roughness values (Rq) from 0.679 to 4.379 nm of corresponding thicknesses ranging from 4 to 85 nm. Scanning electron microscopy (SEM) validated the formation of Ni grains interspersed with NiO phases, facilitating SPR-like effects. UV-visible spectroscopy is demonstrating thickness-dependent spectral (plasmonic peak) shifts. Finite Difference Time Domain (FDTD) simulations corroborate the observed thickness-dependent optical absorbance and the resultant shifts in the absorbance-induced plasmonic peak position and bandgap. Increased NiO presence primarily drives the enhancement of electromagnetic (EM) field localization and the direct impact on power absorption efficiency, which are modulated by the tunability of the plasmonic peak position. Our work demonstrates that controlled fabrication conditions and optimal film thickness selection allow for accurate manipulation of the Ni oxidation process, significantly altering their optical properties. This enables the tailoring of these Ni films for applications in transparent conductive electrodes (TCEs), magneto-optic (MO) devices, spintronics, wear-resistant coatings, microelectronics, and photonics.

18 February 2025 in Electrochimica Acta
Verified
Journal Article
Closed access
GCGabriel Cosio-Aguilar
Gabriel Cosio-Aguilar
JRJassiel R. Rodríguez
Jassiel R. Rodríguez
CBCarlos Belman-Rodríguez
Carlos Belman-Rodríguez
RPR. Ponce-Pérez
R. Ponce-Pérez
JGJonathan Guerrero-Sánchez
Jonathan Guerrero-Sánchez
Santiago Camacho-LopezSantiago Camacho-Lopez
Santiago Camacho-Lopez

4 July 2024 in Beilstein Journal of Nanotechnology
Verified
Journal Article
Open access
PDF file
María J. Martínez-CarreónMaría J. Martínez-Carreón
María J. Martínez-Carreón
FSFrancisco Solis-Pomar
Francisco Solis-Pomar
ACAbel Fundora Cruz
Abel Fundora Cruz
CLClaudio Davet Gutiérrez Lazos
Claudio Davet Gutiérrez Lazos
SMSergio Mejia
Sergio Mejia
EPEduardo Perez
Eduardo Perez
Janus-type nanoparticles are important because of their ability to combine distinct properties and functionalities in a single particle, making them extremely versatile and valuable in various scientific, technological, and industrial applications. In this work, bimetallic silver–palladium Janus nanoparticles were obtained for the first time using the inert gas condensation technique. In order to achieve this, an original synthesis equipment built by Mantis Ltd. was modified by the inclusion of an additional magnetron in a second chamber, which allowed us to use two monometallic targets to sputter the two metals independently. With this arrangement, we could find appropriate settings at room temperature to promote the synthesis of bimetallic Janus nanoparticles. The structural properties of the resulting nanoparticles were investigated by transmission electron microscopy (TEM), and the chemical composition was analyzed by TEM energy dispersive spectroscopy (TEM-EDS), which, together with structural analysis, confirmed the presence of Janus-type nanostructures. Results of molecular dynamics and TEM simulations show that the differences between the crystalline structures of the Pd and Ag regions observed in the TEM micrographs can be explained by small mismatches in the orientations of the two regions of the particle. A density functional theory structural aims to understand the atomic arrangement at the interface of the Janus particle.

1 January 2024 in Journal of Nanotechnology
Verified
Journal Article
Open access
LRLaura A. Reyes-Verdugo
Laura A. Reyes-Verdugo
María J. Martínez-CarreónMaría J. Martínez-Carreón
María J. Martínez-Carreón
CLClaudio Davet Gutiérrez Lazos
Claudio Davet Gutiérrez Lazos
FSFrancisco J. Solis-Pomar
Francisco J. Solis-Pomar
JQJose G. Quiñones-Galvan
Jose G. Quiñones-Galvan
EPEduardo Perez-Tijerina
Eduardo Perez-Tijerina
This report presents the physicochemical properties of hexagonal Bi2Te3 nanoplates chemically prepared in an open reactor at a lower temperature (140°C) than those reported for controlled condition techniques. The samples were drop‐cast on glass and FTO substrates for subsequent structural, chemical, and thermoelectric analyses. The electron microscopy analysis demonstrated that samples precipitated in highly crystalline hexagonal nanoplates, grown along the [0 1 5] plane of the rhombohedral phase of Bi2Te3. The nanoplates exhibited an extension of up to several hundred nanometers, with thicknesses in the range of 20–40 nm, and with an interplanar spacing of 0.321 nm. A vibrational mode at 120 cm−1 due to the breaking of the symmetry of the Bi2Te3 crystal along the C axis was observed by Raman spectroscopy. XPS results showed that despite the strong reactivity of Te2− ions with ambient oxygen, the crystallization of Bi2Te3 hexagonal nanoplates is feasible without controlled vapor pressure and at a lower temperature than reported in other works. Finally, the measurement of the Seebeck coefficient exhibited a p-type conductivity of Bi2Te3, with a maximum value of 169 μV/K within the temperature range of 300 to 320 K.

3 June 2026 in Frontiers in Plant Science
Verified
Journal Article
Open access
PDF file
JRJesusita Rosas-Diaz
Jesusita Rosas-Diaz
VCVianii Cruz-López
Vianii Cruz-López
CHCecilia Hernández-Ramírez
Cecilia Hernández-Ramírez
EEEric G Echeverría-Pérez
Eric G Echeverría-Pérez
María J. Martínez-CarreónMaría J. Martínez-Carreón
María J. Martínez-Carreón
HCHeriberto Cruz-Martínez
Heriberto Cruz-Martínez
Agriculture faces significant challenges, including diseases that reduce crop yields and deficiencies in essential soil nutrients that limit plant growth, decrease productivity, and compromise global food security (1,2). Currently, these challenges are addressed through the intensive use of conventional synthetic agrochemicals. However, their excessive or improper application can lead to soil degradation, water contamination, biodiversity loss, pest resistance, and potential risks to human health and environmental sustainability (3,4). Consequently, various environmentally friendly options have been studied (5)(6)(7)(8), with particular emphasis on the application of nanomaterials as nanofungicides to control crop diseases caused by phytopathogenic fungi and as nanofertilizers that serve as micronutrient sources to enhance the growth and productivity of economically important crops (9,10). The growing interest in nanomaterials is primarily due to their unique physicochemical properties, which differ significantly from those of their bulk counterparts. Owing to their nanoscale size, high surface area, and enhanced reactivity, nanomaterials can interact efficiently with biological systems. These characteristics enable their effective application as nanofungicides and nanofertilizers in agriculture (9,10).In recent years, nanomaterials -including nanocomposites, nanocarbons, nanogels, nanocapsules, and nanoemulsions-have emerged as promising alternatives for controlling phytopathogenic fungi and as advanced fertilizers. Among these, metal nanoparticles have attracted considerable attention due to their outstanding properties for these applications (9, 10). To date, numerous studies have investigated the use of metal nanoparticles as fungicides or as fertilizers, and these findings have been extensively discussed across a wide range of review articles (11)(12)(13)(14)(15)(16)(17)(18)(19)(20). However, these review articles have predominantly analyzed each application separately. Recently, the potential of bifunctional metal nanoparticles in agriculture has gained increasing attention, as these materials can simultaneously function as nanofertilizers and nanofungicides. This bifunctionality offers a more efficient and potentially sustainable strategy, particularly for economically important crops, by integrating plant protection and nutritional supplementation into a single nanoparticle-based treatment. To date, the potential of bifunctional metal nanoparticles has been investigated in different crops (21)(22)(23)(24)(25)(26)(27)(28)(29)(30)(31)(32)(33)(34)(35)(36)(37). Among them, tomato (Solanum lycopersicum) is the most extensively studied crop (30,(33)(34)(35)(36)(37), likely due to its high economic importance and significant nutritional value (19). However, to the best of our knowledge, no review or opinion article has specifically and comprehensively addressed the simultaneous use of metal nanoparticles as both fungicides and fertilizers. Therefore, this opinion article provides a critical assessment of current research and discusses future perspectives on the development and application of bifunctional metal nanoparticles that can act simultaneously as fungicides and fertilizers in agricultural systems, using tomato as a model crop because it has been extensively evaluated in this context.Bifunctional metal nanoparticles represent an innovative strategy to simultaneously act as fungicides and fertilizers in agricultural systems. Metal nanoparticles can exhibit antifungal activity against phytopathogenic fungi, thus reducing disease incidence. At the same time, these metals are essential micronutrients that, in controlled concentrations, support key physiological processes such as photosynthesis and enzyme synthesis. This bifunctional approach could reduce reliance on conventional agrochemicals, optimize nutrient use efficiency, and promote more sustainable agriculture. To date, the potential of bifunctional metal nanoparticles has been investigated in different crops such as bean (Phaseolus vulgaris) (21), eggplant (Solanum melongena) (22), okra (Abelmoschus esculentus) (23), coffee (Coffea arabica) (24), mung bean (Vigna radiata) (25), tea (Camellia sinensis) (26), mustard (Brassica nigra) (27), lettuce (Lactuca sativa) (28), wheat (Triticum aestivum) (29), watermelon (Citrullus lanatus) (30), maize (Zea mays) (31,32), and tomato (Solanum lycopersicum) (30,(33)(34)(35)(36)(37). Among these, tomato is the most extensively studied crop. Therefore, we present advances in the bifunctional use of metal and metal oxide nanoparticles, demonstrating their effectiveness in agricultural applications using tomato as a model crop.Some studies have investigated the bifunctionality of Cu nanoparticles as fungicides and nanofertilizers (33,36). For instance, Cu nanoparticles were used to control Fusarium oxysporum f. sp. lycopersici and promote tomato plant growth (36). The Cu nanoparticles were produced via a green synthesis method, with sizes ranging from 200 to 500 nm. Figure 1a shows that the antifungal activity of the Cu nanoparticles under in vitro conditions was higher than that of cupric hydroxide at all studied concentrations (0.1, 0.25, 0.5, 0.75, and 1 mg/mL). For Cu nanoparticles at 1 mg/mL, antifungal activity exceeded 80% (Figure 1a). Subsequently, the antifungal efficacies under in vivo conditions (tomato plants of 60 days post-inoculation with Fusarium oxysporum) of the Cu nanoparticles (concentrations of 0.5, 0.75, and 1 mg/mL) were compared against copper hydroxide (commercial product at 1 mg/mL) and the positive control (infected with Fusarium oxysporum but without any antifungal). For tomato plants treated with Cu nanoparticles, the incidence (Figure 1b) and severity (Figure 1c) of the disease were significantly reduced compared with copper hydroxide and the positive control. Simultaneously, the effects of Cu nanoparticles on various plant growth parameters were...