Mariem Zouari

Ms. Mariem Zouari

Innorenew CoE, Izola, Slovenia
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
Mariem ZouariMariem Zouari
Mariem Zouari
DDDavid B. Devallance
David B. Devallance
Laetitia MarrotLaetitia Marrot
Laetitia Marrot
The present study investigated the effect of biochar (BC) addition on mechanical, thermal, and water resistance properties of PLA and hemp-PLA-based composites. BC was combined with variable concentration to PLA (5 wt%, 10 wt%, and 20 wt%) and hemp (30 wt%)-PLA (5 wt% and 10 wt%); then, composites were blended and injection molded. Samples were characterized by color measurements, tensile tests, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and water contact angle analysis. Experimental results showed that adding 5 wt% of BC enhanced the composite’s tensile modulus of elasticity and strength. Hence, the use of optimized loading of BC improved the mechanical strength of the composites. However, after BC addition, thermal stability slightly decreased compared with that of neat PLA due to the catalytic effect of BC particles. Moreover, the water-repelling ability decreased as BC content increased due to the specific hydrophilic characteristics of the BC used and its great porosity.

13 October 2023 in Frontiers in Environmental Science
Verified
Journal Article
Open access
Mariem ZouariMariem Zouari
Mariem Zouari
LMLaetitia Marrot
Laetitia Marrot
DDDavid Brian DeVallance
David Brian DeVallance
Biocarbon (BC) represents a potential material for application in air remediation. This study investigated the efficiency of BC particles in the removal of formaldehyde. BC samples were prepared from Arundo donax (AD) and olive stone (OS) feedstocks at variable pyrolysis temperatures (from 300°C to 800°C). The BC particles were characterized using proximate, Fourier transform infrared, water contact angle, particle size, and physisorption analyses. The formaldehyde removal capacity was tested using an electrochemical formaldehyde sensor in a batch experiment. The physicochemical and structural properties depended on the pyrolysis temperature at which the BC was produced. The increase in pyrolysis temperature increased the BC’s pH, hydrophobicity, and porosity. All the samples achieved a formaldehyde removal capacity ranging between 26% and 64% for BC pyrolyzed at 300°C and 800°C, respectively. In BC pyrolyzed at temperatures under 500°C, the formaldehyde capture was governed by a partitioning mechanism through diffusion in the noncarbonized organic fraction. In comparison, formaldehyde capture was controlled by a physical adsorption mechanism through pore filling for BC pyrolyzed at 500°C or above. BC pyrolyzed at 800°C was more efficient for formaldehyde adsorption due to the well-developed microporous structure for both AD and OS. AD-derived BC prepared at 800 °C (AD-BC800) was selected for the re-usability test, using thermal regeneration to remove the adsorbed components. The regenerated sample maintained a comparable formaldehyde removal capacity up to four re-use cycles. Moreover, the comparison between non-activated and activated AD-BC800 revealed that physical activation significantly enhanced BC’s adsorptive ability.

17 May 2023 in International Journal of Environmental Science and Technology
Verified
Journal Article
Open access
PDF file
Mariem ZouariMariem Zouari
Mariem Zouari
LML. Marrot
L. Marrot
DDD. B. DeVallance
D. B. DeVallance
The structural and physio-chemical properties of biochar are crucial to determining biochar’s quality and the adequate application. Specifically, the large porosity of biochar has been known as a favorable feature, especially for environmental remediation. In this regard, physical and chemical modifications have been used to improve biochar’s porosity which requires high-energy consumption and involves chemical agents. The objective of this study was to prepare biochar with developed porosity using mild treatments. Arundo donax and olive stone were demineralized by a water-washing method. Treated and non-treated biomasses were pyrolyzed, and part of the derived samples was subjected to wet ball milling. Samples were characterized with proximate, Fourier transform infrared, particle size, and physisorption analyses. The effect of demineralization depended on the biomass type, as ash reduction only influenced Arundo donax-derived biochar, which was attributed to the difference in initial ash content that was relatively low for olive stone. The carbonization yield decreased by 46% for the Arundo donax biomass after demineralization. Moreover, demineralization expanded the surface area and total pore volume of the Arundo donax biochar. The ball milling was effective in producing micro-sized biochar particles with a mean size ranging between 30 ± 2 µm and 42 ± 2 µm and between 13 ± 1 µm and 22 ± 2 µm for Arundo donax and olive stone without and with demineralization, respectively. Ball milling increased the surface area of non-demineralized Arundo donax by 47% and demineralized Arundo donax by 124%. Additionally, ball milling increased the surface area of non-demineralized olive stone by 65% and demineralized olive stone by 62%. Graphical abstract

7 November 2023 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
Mariem ZouariMariem Zouari
Mariem Zouari
GSGeorge Stanciu
George Stanciu
JJJoseph Jakes
Joseph Jakes
Laetitia MarrotLaetitia Marrot
Laetitia Marrot
EFEfstathios Fiorentis
Efstathios Fiorentis
DDDavid B. DeVallance
David B. DeVallance

27 April 2022 in Molecules
Verified
Journal Article
Open access
PDF file
Laetitia MarrotLaetitia Marrot
Laetitia Marrot
KMKristine Meile
Kristine Meile
Mariem ZouariMariem Zouari
Mariem Zouari
DDDavid DeVallance
David DeVallance
Anna SandakAnna Sandak
Anna Sandak
Rene Herrera DiazRene Herrera Diaz
Rene Herrera Diaz
This study aims to characterize and valorize hemp residual biomass by a slow pyrolysis process. The volatile by-products of hemp carbonization were characterized by several methods (TGA, UV-VIS, TLC, Flash Prep-LC, UHPLC, QTOF-MS) to understand the pyrolysis reaction mechanisms and to identify the chemical products produced during the process. The obtained carbon yield was 29%, generating a gaseous stream composed of phenols and furans which was collected in four temperature ranges (F1 at 20–150 °C, F2 at 150–250 °C, F3 at 250–400 °C and F4 at 400–1000 °C). The obtained liquid fractions were separated into subfractions by flash chromatography. The total phenolic content (TPC) varied depending on the fraction but did not correlate with an increase in temperature or with a decrease in pH value. Compounds present in fractions F1, F3 and F4, being mainly phenolic molecules such as guaiacyl or syringyl derivatives issued from the lignin degradation, exhibit antioxidant capacity. The temperature of the pyrolysis process was positively correlated with detectable phenolic content, which can be explained by the decomposition order of the hemp chemical constituents. A detailed understanding of the chemical composition of pyrolysis products of hemp residuals allows for an assessment of their potential valorization routes and the future economic potential of underutilized biomass.

24 April 2024 in Heliyon
Verified
Journal Article
Open access
Mariem ZouariMariem Zouari
Mariem Zouari
Silvo HribernikSilvo Hribernik
Silvo Hribernik
Laetitia MarrotLaetitia Marrot
Laetitia Marrot
MTMarian Tzolov
Marian Tzolov
DDDavid B. DeVallance
David B. DeVallance
Formaldehyde is a common indoor air pollutant with hazardous effects on human health. This study investigated the efficiency of biocarbon (BC) functionalized with variable contents of MnO2 for formaldehyde removal in ambient conditions via integrated adsorption-photocatalytic degradation technology. The sample with the highest formaldehyde removal potential was used to prepare a functional coating made of acrylic binder mixed with 20 wt% of the particles and applied on beech (Fagus sylvatica L) substrate. SEM images showed that MnO2 was deposited around and inside the pores of the BC. EDX spectra indicated the presence of Mn peaks and increased content of oxygen in the doped BC compared to pure BC, which indicated the successful formation of MnO2. Raman spectra revealed that the disorder in the BC's structure increased with increasing MnO2 loadings. FTIR spectra of BC–MnO2 samples displayed additional peaks compared to the BC spectrum, which were attributed to MnO vibrations. Moreover, the deposition of increased MnO2 loadings decreased the porosity of the BC due to pores blockage. The BC sample containing 8 % Mn exhibited the highest formaldehyde removal efficiency in 8 h, which was 91 %. A synergetic effect between BC and MnO2 was observed. The formaldehyde removal efficiency and capacity of the coating reached 43 % and 6.1 mg/m2, respectively, suggesting that the developed coating can be potentially used to improve air quality in the built environment.