Concerns over the past few decades have focused, more than ever, on finding and implementing efficient, handy, and renewable sources to reduce pollution. Biomass, in general, and biomass from annual vine cuttings, are renewable sources that can be used by a large amount of the population. Biomass densification in the form of briquettes is an efficient method of obtaining a biofuel with the same characteristics as wood. The production of densified material as a briquette consists of sampling, drying naturally, chopping, grinding and briquetting the vine cuttings. The obtained results showed that the size of the briquettes met the requirements imposed by the standard, with a length between 185 mm and 400 mm and a diameter of 58 ± 0.75 mm, the humidity of the briquettes varying between 5.42%, at Sauvignon Blanc and 7.98% for Pinot Noir, while the durability of the briquettes registered minimum values of 98.17% for Muscat Ottonel and a maximum of 99.14% for Feteasca Neagra, and a unit density with values between 1227 kg/m³ for Feteasca Alba and 1389 kg/m³ for Pinot Noir. The conclusions of these experiments are promising, showing that the densification of biomass from vines cuttings qualifies within the standard requirements for obtaining a valuable biofuel.

The dehydration of agricultural products is a topic of research covering the preservation and conservation of the quality of agricultural and food items. The actual tasks of environmental protection include creating novel solutions to reduce the energy needs and exothermic consequences of the bulk of industrial processes. Due to the fact that air temperature and velocity in the seed layer are not uniform, the currently employed seed dryers have significant energy requirements and generate a lot of heat. A device that addresses this problem was developed and is now the subject of a patent application. The Coandă effect-based tronconic plates used in the dryer enable warm air to be dispersed uniformly throughout the product mass. Mathematical modeling was used for the design, operation, and optimization of the baffled drying unit. The investigations, which were conducted by modifying and observing the operational parameters (the velocity and temperature of the warm air) used four distinct types of seed with three different beginning moisture concentrations. Following the completion of the CFD simulation, the unit’s design was created in SolidWorks. The seed and air humidity were measured using sensors, and the air speed was measured using an anemometer. The current lines and fields were used to express the speed and temperature results. The unit with deflectors reduced the amount of heat released by up to 15.38% and reduced the amount of energy used by up to 14%.

Hybrid seed drying technology, based on convection and microwave drying, is a modern method, and the research on the physical changes in cereal seed resulting from hybrid drying is still in its infancy. The aim of the present paper is to study the uniformity of the drying process by examining the physical changes occurring in corn seeds. An innovative drying equipment, combining convective and microwave drying, was used to dry corn seeds (variety DKC5068). The convective drying was performed during the pneumatic transport of the seeds, using hot air at a maximum temperature of 50 °C; the microwave-based drying was performed using 2.45 GHz microwaves. Thus, the seeds were volumetrically heated at a temperature which does not exceed 44 °C. The physical changes in corn seeds were measured in terms of moisture, volume, cracking and color. The results regarding the moisture and volume changes in the seeds during the drying process proved that moist seeds are more homogeneous than dry seeds. The change in volume also changed the stiffness of the seeds, which showed greater homogeneity after drying compared to wet seeds. Hybrid drying led to an average shrinkage of 8.76% compared with the original seed volume, while the percentage of seeds showing cracks after drying increased by 22%. Generally, the drying process also led to color changes, but in the case of hybrid drying the results were inconclusive. Hybrid drying of corn seeds requires a shorter time and does not significantly influence physical characteristics, compared to other drying technologies.

One of the economy key sectors of Republic of Moldova and Romania is the wine sector, where a progressive trend has prevailed in recent years. But to increase its efficiency it is necessary to use the raw material in a complex way, producing both famous wines and other necessary products, as well as to comply with the rigors of ecological standards. The issue of wine by-products draws the attention and interest of researchers, regulators, industry and consumers and has urged the European Community to a zero waste economy by 2025. The article deals with the chemical composition of the main parts of grapes which depend on a number of factors, such as variety, climatic conditions of the year, vine and wine making practices, condition of the grapes, their maturity, etc. There have been presented physico-chemical characteristics of the wastes obtained from the grapes processing such as: bunches, grape pomaces, piquette and diffusion juice, seeds, wine yeast, tirighia and vinasse. Thus, by making use of wine wastes, a number of valuable products can be obtained that can be used for different purposes.