Maxim Kochetygov

Mr. Maxim Kochetygov

Department of Electrical Engineering, Industrial University of Tyumen, Tyumen, Tyumenskaya Oblast’, Russia
orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 November 2025
Verified
Conference Paper
Closed access
EPE.I. Popov
E.I. Popov
SES.O. Evstropov
S.O. Evstropov
MPM.O. Permyakov
M.O. Permyakov
Maxim KochetygovMaxim Kochetygov
Maxim Kochetygov
DCD.E. Chamin
D.E. Chamin
Meeting the ever-increasing requirements for sensorless electric drives from technological processes can be achieved through the use of digital twins, which are a digital (discrete) model of a dynamic system. The use of discrete models always entails both some loss of accuracy in the time domain and distortion in the frequency domain. To preserve the accurate properties of the model, the sampling frequency must be chosen to comply with the requirements of the Shannon-Nyquist theorem. However, in practice, the choice of sampling period is limited by the processing power of the digital signal processor. As a rule, the main element of the components of electrical engineering complexes is a first-order aperiodic unit. As a result, the purpose of the article is to determine the limits of applicability in the frequency domain of existing methods of transition to the Z-domain using the analog prototypes method by conducting a comparative analysis of the integral error in approximating the frequency characteristics of the analog prototype with digital models of the aperiodic unit for each of the methods. It has been established that an increase in the sampling period leads to a discrepancy between digital models and their analogue prototypes in terms of the integral error for any upper limit of the observation window in the mid and high frequencies. This, in turn, leads to the loss of information about such physical processes in a real system, such as the bandwidth range or the change in the phase of the signal at the output of a dynamic system. With appropriate assumptions about the stationarity of the dynamic system, the Tustin method can be recommended as the main method for constructing digital models for most engineering problems. However, when signs of non-stationarity of a dynamic system appear or increased requirements for the synthesis of controllers, according to the authors, it is worth paying attention to analytical models of dynamic systems.

1 January 2025 in Dynamics of Systems, Mechanisms and Machines
Verified
Journal Article
Closed access
Maxim KochetygovMaxim Kochetygov
Maxim Kochetygov
VKV. A. Kopyrin
V. A. Kopyrin
EPE. I. Popov
E. I. Popov
DCD. E. Chamin
D. E. Chamin
MPM. O. Permyakov
M. O. Permyakov
This paper investigates various methods for constructing discrete-time mathematical models of a squirrel-cage induction motor. The relevance of this study stems from the widespread application of induction motors in digitally controlled electric drives, where discrete-time models are essential for the development and analysis of control algorithms. The accuracy of models derived using the bilinear (Tustin) transformation, as well as the forward and backward Euler (left- and right-difference) methods, is evaluated and compared. The results provide guidance on selecting the most suitable discretization method for inductionmotor modeling, based on the desired trade-offs between accuracy, computational efficiency, and specific simulation requirements. Modeling results indicate that the Tustin-based discrete model exhibits the lowest deviation from the continuous-time reference model. Integral error metrics are calculated during transient events, including no-load startup, load surges, and load shedding.

12 December 2025 in Electricity
Verified
Journal Article
Open access
PDF file
VKVladimir Kopyrin
Vladimir Kopyrin
EPEvgeniy Popov
Evgeniy Popov
AGAlexander Glazyrin
Alexander Glazyrin
YIYusup Niyazbekovich Isaev
Yusup Niyazbekovich Isaev
РХРустам Хамитов
Рустам Хамитов
Maxim KochetygovMaxim Kochetygov
Maxim Kochetygov
Enhancing the efficiency of mechanized oil production remains a critical objective in the industry. This paper presents a comparative analysis of existing methods aimed at improving the energy efficiency of oil extraction systems, outlining their respective advantages and limitations. A novel approach is proposed, based on the use of a submersible compensator of reactive power to optimize the performance of electric submersible pumps (ESPs). A mathematical model of the ESP’s electrical system is developed to support the proposed method. Theoretical findings are validated by the experimental studies conducted on operational oil wells. Test results demonstrate a reduction in current consumption by 14.5–20% and an improvement in the power factor from 0.62 to 0.96. These outcomes confirm the effectiveness of the proposed solution in enhancing energy efficiency and reducing electrical losses in oil production processes.

11 November 2025
Verified
Conference Paper
Closed access
EPE.I. Popov
E.I. Popov
VKV.A. Kopyrin
V.A. Kopyrin
DCD.E. Chamin
D.E. Chamin
Maxim KochetygovMaxim Kochetygov
Maxim Kochetygov
MPM.O. Permyakov
M.O. Permyakov
The use of digital twins in electric drive control tasks is driven by ever-increasing requirements for the quality of transient processes. The digital twin of a dynamic system is a discrete model, the use of which always entails some loss of accuracy and the appearance of distortions in the frequency domain. Mathematical models of cable lines are characterized by relatively small time constants, which imposes conditions on the choice of sampling frequency in accordance with the requirements imposed by the Shannon-Nyquist theorem. However, in practice, the choice of sampling period is limited by the processing power of the digital signal processor. As a result, the purpose of the article is to determine the limits of applicability in the frequency domain of existing methods of transition to the Z-region using the analog prototype method by conducting a comparative analysis of the error in approximating the frequency characteristics of the analog prototype with digital models of the RLC low-pass filter for each of the methods. It has been established that an increase in the sampling period leads to a discrepancy between digital models and their analogue prototypes in an integral sense over the entire frequency range. In addition, this leads to the loss of information about such physical processes in a real system, such as resonance or a change in the phase of the signal at the output of a dynamic system. For most engineering problems, the Tustin method can be recommended under appropriate assumptions about the stationarity of the dynamic system. However, if signs of non-stationarity appear or increased requirements for the design of regulators, according to the authors, it is worth paying attention to analytical models of dynamic systems

11 November 2025
Verified
Conference Paper
Closed access
Maxim KochetygovMaxim Kochetygov
Maxim Kochetygov
VKV. A. Kopyrin
V. A. Kopyrin
EPE. I. Popov
E. I. Popov
DCD. E. Chamin
D. E. Chamin
MPM. O. Permyakov
M. O. Permyakov
This article describes some methods of mathematical model construction for a squirrel-cage induction motor in discrete time. The relevance of this research is widespread induction motor using in digital controlled electric drives of oil and gas industry. The discrete time models are used to develop and analyze control algorithms. We compare the accuracy of models based on the bilinear transform (Tustin’s method), the forward difference method, and the backward difference method. The research results help to select the most suitable method of discrete time in IM models according to the required accuracy, computational resourced, and modeling objectives. Discrete time models are derived by using of the forward and backward difference methods; and these models show a larger absolute error throughout the simulation time in comparison to the real time model of the induction motor. The calculated integral relative error transient processes quantitatively express quantitatively, such as no load startup, load application, and load shedding. We find some facts that the state variable plots of the discrete time models are based on the forward and backward difference methods and they are mirrored relative continuous time of IM model’s state in variable plots.