The coupling of offshore wind energy with hydrogen production involves complex energy flow dynamics and management challenges. This study explores the production of hydrogen through a PEM electrolyzer powered by offshore wind farms and Lithium-ion batteries. A digital twin is developed in Python with the aim of supporting the sizing and carrying out a techno-economic analysis. A controller is designed to manage energy flows on an hourly basis. Three scenarios are analyzed by fixing the electrolyzer capacity to meet a steel plant’s hydrogen demand while exploring different wind farm configurations where the electrolyzer capacity represents 40%, 60%, and 80% of the wind farm. The layout is optimized to account for the turbine wake. Results reveal that when the electrolyzer capacity is 80% of the wind farm, a better energy balance is achieved, with 87.5% of the wind production consumed by the electrolyzer. In all scenarios, the energy stored is less than 5%, highlighting its limitation as a storage solution in this application. LCOE and LCOH differ minimally between scenarios. Saved emissions from wind power reach 268 /year while those from hydrogen production amount to 520 /year, underlying the importance of hydrogen in hard-to-abate sectors.
Floating offshore wind energy will play a key role in the clean energy transition. The number of large-scale wind farm projects is growing in regions like Northern Europe, the East Coast of the U.S., and the Mediterranean Sea. Offshore wind farms face fewer layout constraints, as they can be situated in vast, open sea areas. Turbines are often arranged in simple layouts, such as grid patterns, but this can cause significant annual energy production (AEP) losses due to wake–rotor interaction. Increasing spacing can mitigate this effect, but it may not always be feasible due to marine space limitations or higher costs for cabling and maintenance. This paper introduces a multi-objective wind farm optimization framework using a non sorted genetic algorithm (NSGA II) to minimize costs and maximize AEP. The method is applied to two case studies in the Mediterranean Sea, assuming 15 MW wind turbines. Case A is located off the coast of Civitavecchia, and case B in the Gulf of Squillace. AEP evaluation is performed with the open-source library FLOw Redirection and Induction in Steady-State (floris), while optimization is done using pymoo. In case A, the layout characterized by the lowest levelized cost of energy (LCOE) features 16 turbines, achieving an AEP of 709 GWh, an LCOE of 112.06 €/MWh, and wake losses of 2.6%. Meanwhile, in case B, the layout with the lowest LCOE consists of 19 turbines, achieving an AEP of 1140 GWh, an LCOE of 80.82 €/MWh, and wake losses of 4%.