In this work, we apply a physically based model, namely the HIRESSS (HIgh REsolution Slope Stability Simulator) model, to forecast the occurrence of shallow landslides at the regional scale. HIRESSS is a physically based distributed slope stability simulator for analyzing shallow landslide triggering conditions during a rainfall event. The modeling software is made up of two parts: hydrological and geotechnical. The hydrological model is based on an analytical solution from an approximated form of the Richards equation, while the geotechnical stability model is based on an infinite slope model that takes the unsaturated soil condition into account. The test area is a portion of the Aosta Valley region, located in the northwest of the Alpine mountain chain. The geomorphology of the region is characterized by steep slopes with elevations ranging from 400 m a.s.l. on the Dora Baltea River's floodplain to 4810 m a.s.l. at Mont Blanc. In the study area, the mean annual precipitation is about 800–900 mm. These features make the territory very prone to landslides, mainly shallow rapid landslides and rockfalls. In order to apply the model and to increase its reliability, an in-depth study of the geotechnical and hydrological properties of hillslopes controlling shallow landslide formation was conducted. In particular, two campaigns of on site measurements and laboratory experiments were performed using 12 survey points. The data collected contributed to the generation of an input map of parameters for the HIRESSS model. In order to consider the effect of vegetation on slope stability, the soil reinforcement due to the presence of roots was also taken into account; this was done based on vegetation maps and literature values of root cohesion. The model was applied using back analysis for two past events that affected the Aosta Valley region between 2008 and 2009, triggering several fast shallow landslides. The validation of the results, carried out using a database of past landslides, provided good results and a good prediction accuracy for the HIRESSS model from both a temporal and spatial point of view.
1 April 2017 in Physics and Chemistry of the Earth, Parts A/B/C
A variety of methods (detailed geomorphological surveys, geotechnical investigations, local instrumentation, satellite data, and radar interferometry) along with geophysical techniques may be used to investigate slope instabilities and to detect the inhomogeneities of materials as well as their properties, boundaries, and sliding surfaces. Of these techniques, the method based on seismic noise measurements allows abrupt changes in seismic impedance at landslide boundaries resulting from varying levels of seismic velocity and material density to be detected. Peaks of the Horizontal to Vertical Spectral Ratio have proven to serve as effective indicators of the resonance frequency of low-impedance surface layers. In this work, horizontal to vertical spectral ratio surveys of the Castagnola (La Spezia, Italy) and Roccalbegna (Grosseto, Italy) landslides were carried out. From roughly 100 single-station measurements made inside and outside the landslides at each site, we define a threshold number of single-station seismic noise measures beyond which information is redundant because the variation in reconstructed impedance contrast surfaces is not significant. This approach allows one to reliably retrieve the geometry of a landslide body, ultimately generating useful information for determining whether further measurements are needed to improve landslide body reconstruction
8 September 2023 in The European Physical Journal Plus
The area surrounding the dismissed mine of Sos Enattos (Sardinia, Italy) is the Italian candidate site for hosting Einstein Telescope (ET), the third-generation gravitational wave (GW) observatory. One of the goals of ET is to extend the sensitivity down to frequencies well below those currently achieved by GW detectors, i.e. down to 2 Hz. In the bandwidth [1,10] Hz, the seismic noise of anthropogenic origin is expected to represent the major perturbation to the operation of the infrastructure, and the site that will host the future detector must fulfill stringent requirements on seismic disturbances. In this paper we describe the operation of a temporary, 15-element, seismic array deployed in close proximity to the mine. Signals of anthropogenic origin have a transient nature, and their spectra are characterized by a wide spectral lobe spanning the [3,20] Hz frequency interval. Superimposed to this wide lobe are narrow spectral peaks within the [3,8] Hz frequency range. Results from slowness analyses suggest that the origin of these peaks is related to vehicle traffic along the main road running east of the mine. Exploiting the correlation properties of seismic noise, we derive a dispersion curve for Rayleigh waves, which is then inverted for a shallow velocity structure down to depths of $$\approx$$ 150 m. This data, which is consistent with that derived from analysis of a quarry blast, provide a first assessment of the elastic properties of the rock materials at the site candidate to hosting ET.
One of the main constraints in assessing shallow landslide hazards through physically based models is the need to characterize the geotechnical parameters of the involved materials. Indeed, the quantity and quality of input data are closely related to the reliability of the results of every model used, therefore data acquisition is a critical and time-consuming step in every research activity. In this perspective, we reviewed all official certificates of tests performed through 30 years at the Geotechnics Laboratory of the Earth Science Department (University of Firenze, Firenze, Italy), compiling a dataset in which 380 points are accurately geolocated and provide information about one or more geotechnical parameters used in slope stability modeling. All tests performed in the past (in the framework of previous research programs, agreements of cooperation, or to support didactic activities) were gathered, homogenized, digitalized, and geotagged. The dataset is based on both on-site tests and laboratory tests, it accounts for 40 attributes, among which 13 are descriptive (e.g., lithology or location) and 27 may be of direct interest in slope stability modeling as input parameters. The dataset is made openly available and can be useful for scientists or practitioners committed to landslide modeling.
In this work, we apply a physically-based model, namely the HIRESSS (High REsolution Stability Simulator) model, to forecast the occurrence of shallow landslides at regional scale. The final aim is the set-up of an early warning system at regional scale for shallow landslides. HIRESSS is a physically based distributed slope stability simulator for analysing shallow landslide triggering conditions in real time and in large areas using parallel computational techniques. The software can run in real-time by assimilating weather data and uses Monte Carlo simulation techniques to manage the geotechnical and hydrological input parameters. The test area is a portion of the Valle d'Aosta region, located in North-West Alpine mountain chain. The geomorphology of the region is characterized by steep slopes with elevations ranging from 400 m a.s.l. of Dora Baltea's river floodplain to 4810 m a.s.l. of Mont Blanc. In the study area, the mean annual precipitation is about 800–900 mm. These features lead to a high hydrogeological hazard in the whole territory, as mass movements interest the 70 % of the municipality areas (mainly shallow rapid landslides and rock falls). In order to apply the model and to increase its reliability, an in-depth study of the geotechnical and hydrological properties of hillslopes controlling shallow landslides formation was conducted. In particular, two campaigns of on site measurements and laboratory experiments were performed with 12 survey points. The data collected contributes to generate input map of parameters for HIRESSS model. In order to take into account the effect of vegetation on slope stability, the contribution of the root cohesion has been also taken into account based on the vegetation map and literature values. The model was applied in back analysis on two past events that have affected Valle d'Aosta region between 2008 and 2009, triggering several fast shallow landslides. The validation of the results, carried out using a database of past landslides, has provided good results and a good prediction accuracy of the HIRESSS model both from temporal and spatial point of view. A statistical analysis of the HIRESSS outputs in terms of failure probability has been carried out in order to define reliable alert levels for regional landslide early warning systems.
1 November 2016 in Rendiconti Online della Società Geologica Italiana