Mohammad Al-Khaleel

Dr. Mohammad Al-Khaleel

Khalifa University of Science and Technology, Abu Dhabi, Abū Z̧aby, United Arab Emirates
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 October 2008 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
MAMohammad Al-Khaleel
Mohammad Al-Khaleel
ARAlbert E. Ruchli
Albert E. Ruchli
MGMartin J. Gander
Martin J. Gander
Waveform relaxation (WR) is a technique that can be used to solve large systems of ordinary differential equations (ODEs). It is particularly suitable for the parallel solution of ODEs with multiple time scales and has successfully been used for the solution of electronic circuits and for solving partial differential equations. The main issue limiting the utility of WR is the class of problems with strong subsystem-to-subsystem couplings and long analysis time intervals resulting in nonuniform slow convergence. Here, we consider transmission-line (TL) circuits since they represent an important part of a Spice-type circuit solver. For TLs, the coupling between different lines is relatively weak, and thus, partitioning in the transverse direction leads to very fast WR algorithms. However, longitudinal partitioning of TLs is very challenging due to the strong coupling that results. In this paper, we propose an approach with improved convergence properties for strongly coupled longitudinal partitioning of TLs and other similarly strongly coupled circuits.

24 August 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
aissa abderrahmaneaissa abderrahmane
aissa abderrahmane
MAMohammad Al-Khaleel
Mohammad Al-Khaleel
AMAbed Mourad
Abed Mourad
HLHoussem Laidoudi
Houssem Laidoudi
Zied DrissZied Driss
Zied Driss
RMRiadh Marzouki
Riadh Marzouki
Energy saving has always been a topic of great interest. The usage of nano-enhanced phase change material NePCM is one of the energy-saving methods that has gained increasing interest. In the current report, we intend to simulate the natural convection flow of NePCM inside an inverse T-shaped enclosure. The complex nature of the flow results from the following factors: the enclosure contains a hot trapezoidal fin on the bottom wall, the enclosure is saturated with pours media, and it is exposed to a magnetic field. The governing equations of the studied system are numerically addressed by the higher order Galerkin finite element method (GFEM). The impacts of the Darcy number (Da = 10−2–10−5), Rayleigh number (Ra = 103–106), nanoparticle volume fraction (φ = 0–0.08), and Hartmann number (Ha = 0–100) are analyzed. The results indicate that both local and average Nusselt numbers were considerably affected by Ra and Da values, while the influence of other parameters was negligible. Increasing Ra (increasing buoyancy force) from 103 to 106 enhanced the maximum average Nusselt number by 740%, while increasing Da (increasing the permeability) from 10−5 to 10−2 enhanced both the maximum average Nusselt number and the maximum local Nusselt number by the same rate (360%).

24 October 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
AHAhmed Kadhim Hussein
Ahmed Kadhim Hussein
Farhan LaftaFarhan Lafta
Farhan Lafta
AAAzher Abed
Azher Abed
MAMohammad Al-Khaleel
Mohammad Al-Khaleel
Hussein TogunHussein Togun
Hussein Togun
aissa abderrahmaneaissa abderrahmane
aissa abderrahmane
Fresh water is scarce, making it a worldwide issue. In order to address global freshwater demand, a filtration technique is needed. Solar distillation (SD) that purifies brackish and subterranean water has been proven to be a promising green technology. It produces distilled water which can be used as potable water for drinking and other purposes. The designs, operations, and configurations of several inverted solar stills are thoroughly examined in this article. All techniques for solar water distillation to separate saltwater from freshwater have the same fundamental idea. It has been demonstrated that for a specified mass of water in the top basin, the daily output of an inverted absorber double-basin solar still (IASS) grows with increasing water depth in the bottom basin. Nevertheless, as the water depth in the bottom basin rises from 1 cm to 5 cm, the output of an inverted absorber double-basin solar system falls by about 27%. At water depths of 4, 6, and 8 cm, the daily yields from inverted absorber solar stills paired with a refrigeration cycle (RIASS) were 6.4, 10.08, and 9.5 L/day, respectively. The results also showed a substantial rise in water temperature in the inverted absorber solar still as a result of lower bottom heat loss and larger absorptivity. In this study, the emphasis on energy, efficiency, and environmental concerns remains with the modified multi-wick basin-type inverted absorber solar panel. The performance of the inverted trickling solar still was assessed with a 60 ppm average salinity under various sun radiation, feed water flow rate, and existence conditions for natural convection. It was found that the still could produce 2.55 L/day m2 of fresh water, a 15% increase. Brackish water with a salinity of 6000 ppm was used to test the still in November at tilt angles of 47° and 32°. Condensate production at the specified angles was 2.8 and 2 L/d, respectively. A total output of 6.907, 5.681, and 4.650 kg/m2/day was also generated using the modified multi-wick basin-type inverted absorber solar still (MMWBIASS) at water depths of 1, 2, and 3 cm, respectively. With black cotton wicks, the MMWBIASS had a total thermal efficiency of 34.04%, 28.17%, and 23.61%.

1 January 2014 in SIAM Journal on Numerical Analysis
Verified
Journal Article
Closed access
MAMohammad Al-Khaleel
Mohammad Al-Khaleel
MGMartin J. Gander
Martin J. Gander
ARAlbert E. Ruehli
Albert E. Ruehli
Waveform relaxation techniques have become increasingly important with the wide availability of parallel computers with a large number of processors. A limiting factor for classical waveform relaxation, however, is the convergence speed for an important class of problems, especially if long time windows are considered. In contrast, the optimized waveform relaxation algorithm discussed in this paper is well suited to address this problem. Today several numerical analyses have shown that optimized waveform relaxation algorithms can overcome slow convergence over long time windows. However, the optimized waveform relaxation techniques require the determination of optimized parameters. In this paper, we present a theoretical foundation for the determination of the optimized parameters for an important class of RC circuits.

5 September 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
aissa abderrahmaneaissa abderrahmane
aissa abderrahmane
Naef A.A. QasemNaef A.A. Qasem
Naef A.A. Qasem
AMAbed Mourad
Abed Mourad
MAMohammad Al-Khaleel
Mohammad Al-Khaleel
Zafar SaidZafar Said
Zafar Said
RMRiadh Marzouki
Riadh Marzouki
Recently, phase change materials (PCMs) have gained great attention from engineers and researchers due to their exceptional properties for thermal energy storing, which would effectively aid in reducing carbon footprint and support the global transition of using renewable energy. The current research attempts to enhance the thermal performance of a shell-and-tube heat exchanger by means of using PCM and a modified tube design. The enthalpy–porosity method is employed for modelling the phase change. Paraffin wax is treated as PCM and poured within the annulus; the annulus comprises a circular shell and a fined wavy (trefoil-shaped) tube. In addition, copper nanoparticles are incorporated with the base PCM to enhance the thermal conductivity and melting rate. Effects of many factors, including nanoparticle concentration, the orientation of the interior wavy tube, and the fin length, were examined. Results obtained from the current model imply that Cu nanoparticles added to PCM materials improve thermal and melting properties while reducing entropy formation. The highest results (27% decrease in melting time) are obtained when a concentration of nanoparticles of 8% is used. Additionally, the fins’ location is critical because fins with 45° inclination could achieve a 50% expedition in the melting process.

20 September 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
aissa abderrahmaneaissa abderrahmane
aissa abderrahmane
OTObai Younis Taha
Obai Younis Taha
MAMohammad Al-Khaleel
Mohammad Al-Khaleel
HLHoussem Laidoudi
Houssem Laidoudi
NANevzat Akkurt
Nevzat Akkurt
RMRiadh Marzouki
Riadh Marzouki
In a magnetic field, two-dimensional (2D) mixed convection is investigated within a zigzagged trapezoidal chamber. The lower side of the trapezoidal chamber is irregular, in particular, a zigzagged wall with different zigzag numbers N. The fluid particles move in the room due to the motion of the upper wall, while the porosity-enthalpy approach represents the melting process. The thermal parameters of the fluid are enhanced by what is called a nano-encapsulated phase change material (NEPCM) consisting of polyurethane as the shell and a nonadecane as the core, while water is used as the base fluid. In order to treat the governing equations, the well-known Galerkin finite element method (GFEM) is applied. In addition, the heat transfer (HT) irreversibility and the fluid friction (FF) irreversibility are compared in terms of the average Bejan number. The main results show that the melt band curve behaves parabolically at smaller values of Reynolds number (Re) and larger values of Hartmann number (Ha). Moreover, minimizing the wave number is better in order to obtain a higher heat transfer rate.