Montri Luengchavanon

Dr. Montri Luengchavanon

Faculty of environmental management, Prince of Songkla University, Songkhla, Thailand
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
RLRattikal Laosena
Rattikal Laosena
APARKOM PALAMANIT
ARKOM PALAMANIT
Montri LuengchavanonMontri Luengchavanon
Montri Luengchavanon
Jitralada KittijaruwattanaJitralada Kittijaruwattana
Jitralada Kittijaruwattana
Charoen NakasonCharoen Nakason
Charoen Nakason
Aujchariya ChotikhunAujchariya Chotikhun
Aujchariya Chotikhun
The objective of this study was to investigate the production and properties of mixed pellets made from rubberwood (Hevea brasiliensis Muell. Arg) and refuse-derived fuel (RDF) waste with no added binder. Three different conditions of mixed pellets were developed to compare their chemical and physical properties to rubberwood pellets. The produced samples were subjected to both ultimate and proximate analyses. The contents of C, H, N, S, and Cl significantly increased with the increasing amount of refuse-derived fuel in the samples, resulting in reduction of the volatile matter. The mechanical durability of the pellet samples ranged between an average value of 98 and 99%. Mixed pellets containing 50% of rubberwood and 50% of refuse-derived fuel have improved heating values by 22.21% compared to rubberwood pellets. Moreover, mixed pellets having 50% of wood and 50% of refuse-derived fuel had the highest density and the highest energy compared to the other samples. Based on the findings of this study, it appears that the manufactured mixed pellets have the potential to be used as high-energy fuel.

1 June 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
DKDong Le Khac
Dong Le Khac
SCShahariar Chowdhury
Shahariar Chowdhury
Montri LuengchavanonMontri Luengchavanon
Montri Luengchavanon
MJMohammad Shah Jamal
Mohammad Shah Jamal
ALAmel Laref
Amel Laref
CCChin Hua Chia
Chin Hua Chia
The antimony sulphide (AnS) solar cell is a relatively new photovoltaic technology. Because of its attractive material, optical, and electrical qualities, Sb2Se3 is an excellent absorption layer in solar cells, with a conversion efficiency of less than 8%. The purpose of this research is to determine the best parameter for increasing solar cell efficiency. This research focused on the influence of absorber layer defect density and the n/i interface on the performance of antimony trisulfide solar cells. The researchers designed the absorber thickness values with the help of the SCAPS-1D (Solar Cell Capacitance Simulator-1D) simulation programme. For this purpose, they designed the ZnS/Sb2Se3/PEDOT: PSS planar p-i-n structure, and then simulated its performance. This result confirms a Power Conversion Efficiency (PCE) of ≥25% at an absorber layer thickness of >300 nm and a defect density of 1014 cm−3, which were within the acceptable range. In this experiment, the researchers hypothesised that the antimony triselenide conduction band possessed a typical energy of ≈0.1 eV and an energetic defect level of ≈0.6 eV. At the n/i interface, every condition generated a similar result. However, the researchers noted a few limitations regarding the relationship between the defect mechanism and the device performance.

17 November 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
NDNgoc Duong
Ngoc Duong
KTKuaanan Techato
Kuaanan Techato
LNLe Duc Niem
Le Duc Niem
YHYến Nguyễn Thị Hải
Yến Nguyễn Thị Hải
NDNguyen Van Dat
Nguyen Van Dat
Montri LuengchavanonMontri Luengchavanon
Montri Luengchavanon
A novel, small-scale vertical axis wind turbine tree was designed using turbines combining both Darrieus and Savonius blades. We tested for economic viability using wind data collected at a site in Surat Thani, Thailand. The Weibull distribution and Monte Carlo modeling with financial indices (Levelized Cost of Electricity (LCOE), Net Present Value (NPV), Internal Rate of Return (IRR), and Simple Payback Period (SPP)) were used to analyze data. We found that monthly mean wind speeds varied from 2.35 m/s in October to 2.84 m/s in February, corresponding to a wind power of 28.43 W/m2 and 42.68 W/m2. The average annual power output was 1446.1 kWh for May 2019 to April 2021. Results show that for turbine cut-in to cut-out speeds (2 m/s to 15 m/s), the prototype has potential economic feasibility (NPV > 0 for 64.93%), although the small capacity of the wind tree, in combination with the low average wind speed at the Surat Thani test site, showed a lack of economic viability at this specific location (NPV = USD − 20,946.29). A higher-wind-speed location (Chiang Mai) showed viability, especially at a 10 m height (NPV > 0 for 84.83%). We discuss potential conditions that would make broader use of the prototype feasible.

14 October 2021 in BioResources
Verified
Journal Article
Closed access
KCKrittiya Chopngam
Krittiya Chopngam
Montri LuengchavanonMontri Luengchavanon
Montri Luengchavanon
MKMatthana Khangkhamano
Matthana Khangkhamano
KCKanadit Chetpattananondh
Kanadit Chetpattananondh
WLWarakorn Limbut
Warakorn Limbut
Activated carbon from coconut shells is a low-cost, environmentally friendly material that is available for fabricating the electrodes for electric double-layer capacitance supercapacitors. As such, activated carbon derived from coconut shells was coated with Co3O4/CeO2, and its electrical and ionic conductivity were evaluated. The ternary technique for selecting materials was systematically investigated with an economical process. The Co3O4/CeO2 coating that was formed on the activated carbon coconut shells was deemed AC-Co3O4-CeO2. The 90-05-05 composite was the best electrode for electric double-layer capacitance supercapacitors, resulting in high conductivity (0.62 x 103 S·cm2), low series resistance and internal resistance (based on the Nyquist plot), and the charge-discharge was able to reach 0.56 V for 90 seconds (1A/g). Therefore, activated carbon coconut shells coated in Co3O4/CeO2 can promote the necessary characteristics of electrodes needed for electric double-layer capacitance supercapacitors.

14 September 2024 in Edelweiss Applied Science and Technology
Verified
Journal Article
Open access
PDF file
ASAntika Sriraksa
Antika Sriraksa
PCPrachyakorn Chaiyakot
Prachyakorn Chaiyakot
Montri LuengchavanonMontri Luengchavanon
Montri Luengchavanon
Thailand is actively working to position itself as a sustainable tourism destination, with sustainability embedded within the nation’s tourism industry framework. Assessment and certification play pivotal roles, serving as essential tools that validate the implementation of sustainable management practices within the accommodation sector. This article explores the concept of sustainable tourism through the lens of widely adopted certifications in Thailand’s hotel industry. A content analysis was conducted to compare certifications based on the Global Sustainable Tourism Council (GSTC) criteria. Furthermore, the study evaluated the efficacy of certifications in promoting the practical integration of sustainable tourism. To deepen the analysis, a thematic review examined the extent to which these certifications integrate principles of Environmental Management Systems (EMSs). The findings highlight a tendency of certification organizations to prioritize environmental aspects over economic and social dimensions. This suggests a need for better alignment in facilitating the holistic integration of sustainable tourism principles into certification practices.

1 April 2022 in CFD Letters
Verified
Journal Article
Open access
PDF file
TAThanaphat Akkarachaiphant
Thanaphat Akkarachaiphant
BCBoonyarit Chatthong
Boonyarit Chatthong
YTYutthana Tirawanichakul
Yutthana Tirawanichakul
Montri LuengchavanonMontri Luengchavanon
Montri Luengchavanon
Wind energy is a green and sustainable system and vertical axis wind turbines (VAWT) have been developed for low speed operation as small wind turbines. CFD simulations can be conducted to save time and cost. The design structure of the VAWT wind turbine used CFD software for the operation of stream lining. This investigation involved the designs of Model A and B, the Benesh type matched by Model A and the Semicircular type matched by Model B. The CFD simulation compared Cp and TSR values between using Model A and Model B wind turbines. Model A exhibited a 0.24 Cp maximum matched by 1.22 TSR, this model could produce high performance when compared to Model B. Model A could be increased by 4.8 times the Cp value when compared with Model B. The 3D velocity streamlines and corresponding vector plots at various angular positions can be performed using the wind flow with corresponding Cp values.