Jitralada Kittijaruwattana

Ms. Jitralada Kittijaruwattana

Prince of Songkla University, Surat Thani Campus, Surat Thani, Thailand
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
RLRattikal Laosena
Rattikal Laosena
APARKOM PALAMANIT
ARKOM PALAMANIT
Montri LuengchavanonMontri Luengchavanon
Montri Luengchavanon
Jitralada KittijaruwattanaJitralada Kittijaruwattana
Jitralada Kittijaruwattana
Charoen NakasonCharoen Nakason
Charoen Nakason
Aujchariya ChotikhunAujchariya Chotikhun
Aujchariya Chotikhun
The objective of this study was to investigate the production and properties of mixed pellets made from rubberwood (Hevea brasiliensis Muell. Arg) and refuse-derived fuel (RDF) waste with no added binder. Three different conditions of mixed pellets were developed to compare their chemical and physical properties to rubberwood pellets. The produced samples were subjected to both ultimate and proximate analyses. The contents of C, H, N, S, and Cl significantly increased with the increasing amount of refuse-derived fuel in the samples, resulting in reduction of the volatile matter. The mechanical durability of the pellet samples ranged between an average value of 98 and 99%. Mixed pellets containing 50% of rubberwood and 50% of refuse-derived fuel have improved heating values by 22.21% compared to rubberwood pellets. Moreover, mixed pellets having 50% of wood and 50% of refuse-derived fuel had the highest density and the highest energy compared to the other samples. Based on the findings of this study, it appears that the manufactured mixed pellets have the potential to be used as high-energy fuel.

9 September 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Aujchariya ChotikhunAujchariya Chotikhun
Aujchariya Chotikhun
Jitralada KittijaruwattanaJitralada Kittijaruwattana
Jitralada Kittijaruwattana
Emilia-Adela SalcaEmilia-Adela Salca
Emilia-Adela Salca
Salim HizirogluSalim Hiziroglu
Salim Hiziroglu
The objectives of this study were to evaluate some of physical and mechanical properties of rubberwood (Hevea brasiliensis) as function of microwave heat treatment process. The specimens were heat treated at three temperature levels of 150 °C, 180 °C, and 220 °C for 20 min in a small microwave oven connected to a computer. Bending characteristics, namely modulus of elasticity (MOE), modulus of rupture (MOR) as well as hardness of the samples were tested. Dimensional stability in the form of swelling and water absorption of the specimens were also determined. Based on the findings in this work it appears that microwave can be used successfully for heat treatment of rubberwood. Overall mechanical properties of the samples were adversely influenced by the treatment. MOE, MOR and hardness values of the samples treated at a temperature of 220 °C had 2.37, 3.69, and 2.12 times reduced than those of control samples, respectively. Dimensional stability of the heat treated samples as a result of 2-h and 24-h water soaking improved. Micrographs take from scanning electron microscope (SEM) and transmission electron microscope (TEM) revealed that certain amount of damage took place in the cellwall of the treated specimens. Overall discoloration on the samples due to microwave heat treatment was found insignificant.

9 March 2022 in Forests
Verified
Journal Article
Open access
PDF file
Aujchariya ChotikhunAujchariya Chotikhun
Aujchariya Chotikhun
Jitralada KittijaruwattanaJitralada Kittijaruwattana
Jitralada Kittijaruwattana
WAWa Ode Muliastuty Arsyad
Wa Ode Muliastuty Arsyad
Emilia-Adela SalcaEmilia-Adela Salca
Emilia-Adela Salca
YHYusuf Sudo Hadi
Yusuf Sudo Hadi
Salim HizirogluSalim Hiziroglu
Salim Hiziroglu
The objective of this work was to evaluate some of the properties of experimental wood plastic composite (WPC) panels manufactured from a low percentage of rubberwood (Hevea brasiliensis Muell. Arg), waste polyethylene terephthalate (PET) and silica at three different ratios. It was determined that water absorption values of the samples decreased with the increasing amount of PET in the panels. The lowest absorption value of 0.34% was determined for the samples having 40% PET in their content as a result of 24-h soaking. The highest hardness value of 4492 N was found for the samples made with the combination of rubberwood, PET and silica at 10%, 40% and 50%, respectively. The compressive strength of WPC specimens also followed a similar trend with the hardness characteristics of the panel and improved with increasing PET percentage. Statistical analyses revealed that values of compression strength, hardness, 2-h and 24-h water absorption of the specimens made with 20, 30, and 40% PET content resulted in significant difference from each other (p ≤ 0.0001). Based on the findings in this study it appears that increasing silica content in the samples adversely influenced their mechanical properties while creating a certain level of enhancement of water absorption of the specimens. It seems that using a combination of waste PET and a limited amount of silica with a low percentage of wood particles could have the potential to produce value-added environmentally friendly composites to be used for different applications.

11 October 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Aujchariya ChotikhunAujchariya Chotikhun
Aujchariya Chotikhun
RLRattikal Laosena
Rattikal Laosena
Jitralada KittijaruwattanaJitralada Kittijaruwattana
Jitralada Kittijaruwattana
Seng Hua LeeSeng Hua Lee
Seng Hua Lee
KSKanokorn Sae-Ueng
Kanokorn Sae-Ueng
Emilia-Adela SalcaEmilia-Adela Salca
Emilia-Adela Salca
The purpose of this research was to investigate the production and properties of wood plastic pellets (WPP) made from rubberwood sawdust and refuse-derived fuel (RDF). WPP samples were tested for chemical and physical properties and compared to standard wood pellets. The results showed that when using RDF, the elemental compositions of WPP can affect the content of Zn, Cu, Pb, Cd, Cr, and As. In addition, RDF samples had a higher heating value of 21.19–22.09 MJ/kg. The physical properties of the samples revealed that they had a density of 1175–1286 kg/m3, a mechanical durability of 98%, and a moisture content of 5.38–11.27%. According to the study’s findings, these manufactured mixed pellets have the potential to be beneficial for alternative sustainable green energy as fuels. Moreover, using RDF, which comes from MSW, could help in global warming mitigation.

13 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KCKaknokrat Chonsin
Kaknokrat Chonsin
SBSuthasini Buaphet
Suthasini Buaphet
JIJutamas Intarasombut
Jutamas Intarasombut
Aujchariya ChotikhunAujchariya Chotikhun
Aujchariya Chotikhun
Jitralada KittijaruwattanaJitralada Kittijaruwattana
Jitralada Kittijaruwattana
Musculoskeletal disorders (MSDs) are associated with awkward postures, causing health problems for workers. MSDs impact physical activity levels and decrease professional work capacity. The objective of this study is to investigate the ergonomic risks in a handicraft community enterprise group using Krajood as the main raw material. The sample group consisted of craftsmen who engage in woven bags, and it was selected using inclusion and exclusion criteria. Data were collected with a general information questionnaire, a risk assessment questionnaire for musculoskeletal disorders, and the Rapid Upper Limb Assessment (RULA) worksheet. The results indicate that musculoskeletal disorders were experienced by all the workers during the past year, with pain or discomfort in all 12 body parts. Moreover, most commonly, the pains were in the shoulders, upper back, lower back, and hands/wrists on both the left and the right side. The lower back exhibited a 100% prevalence of symptoms. The risk assessment by RULA indicated that the jobs had the highest possible total risk score at 7 points (45%), which needs to improve immediately. The top three high-risk work processes were the product line hammering steps, using a sewing machine to form the product, and the weaving and forming stage. Therefore, this study provides critical information for the craftsmen and their employers to improve workers’ health and production efficiency.

1 July 2026 in Safety
Verified
Journal Article
Open access
PDF file
YSYuwairee Salamae
Yuwairee Salamae
KCKaknokrat Chonsin
Kaknokrat Chonsin
KSKusuma Sukmanoo
Kusuma Sukmanoo
PPPiyachat Praihong
Piyachat Praihong
MNMuhsen Nasamut
Muhsen Nasamut
Jitralada KittijaruwattanaJitralada Kittijaruwattana
Jitralada Kittijaruwattana
Musculoskeletal disorders (MSDs) represent a critical global challenge to workforce productivity. In Thailand, these disorders are particularly prevalent in labor-intensive industries such as ice manufacturing, where workers face significant ergonomic hazards. Addressing this gap, the present study aimed to assess the occupational health, safety, and ergonomic risks facing workers in ice production facilities. This cross-sectional descriptive study investigated production workers who were employees in two of eight ice manufacturing plants in Surat Thani, Thailand, using the Rapid Entire Body Assessment (REBA) method. A structured occupational health and safety risk assessment questionnaire and the REBA evaluation form were used to collect data. All participants were male, averaging 30.4 (±8.5) years old. Regular pain areas included the upper/lower back, hips/thighs, shoulders, wrists, and ankles. Ergonomic assessments showed high overall risk due to heavy lifting, repetitive tasks, and cold environments. Based on REBA scores, 13.04% were in the very-high-risk group (score ≥ 11) and 65.22% in the high-risk group (score 8–10). Most production workers in ice plants faced high ergonomic risks, especially from postures affecting the upper and lower back. Training should be provided to promote awareness of risky postures and proper lifting techniques. Mechanical aids and back-support equipment are also recommended to help prevent musculoskeletal injuries.