Mostafa Shooshtari

Dr. Mostafa Shooshtari

Delft University of Technology, Delft, The Netherlands
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 November 2020 in IEEE Sensors Journal
Verified
Journal Article
Closed access
Mostafa ShooshtariMostafa Shooshtari
Mostafa Shooshtari
ASAlireza Salehi
Alireza Salehi
Delft University VollebregtDelft University Vollebregt
Delft University Vollebregt
Carbon nanotubes (CNTs) have shown promising results for gas sensing due to their high surface area. Since humidity has a great impact on the electrical conductivity of resistive CNT gas sensors, we have investigated the change of humidity on their sensing properties. In this study, we fabricated vertically aligned CNT-based gas sensors for the detection of volatile organic compounds. The morphologies and phase structures of the fabricated samples were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR), confirming the presence of CNT with some surface impurities. It was found that a relative humidity increase from 10% to 80% can reduce the electrical conductivity of the sensor by around 4%. On the other hand, for a humidity above 80% the conductivity increased slightly. The fabricated device has been used as a gas sensor for volatile organic compounds, and the cross-sensitivity to humidity was investigated. It was found that in the fabricated sensors, a change in humidity up to 80% results in a 40% decrease in the response for the studied organic compounds.

17 May 2021 in Nanotechnology
Verified
Journal Article
Open access
PDF file
Mostafa ShooshtariMostafa Shooshtari
Mostafa Shooshtari
ASAlireza Salehi
Alireza Salehi
Delft University VollebregtDelft University Vollebregt
Delft University Vollebregt
In this paper, we study the influence of two key factors, temperature, and humidity, on gas sensors based on titanium dioxide nanowires synthesized at 4 different temperatures and with different morphology. The samples’ structure are investigated using SEM, XRD and FTIR analysis. The effects of humidity and temperature are studied by measuring the resistance and gas response when exposed to ethanol. At room temperature, we observed a 15% sensitivity response to 100 ppm of ethanol vapor and by increasing the operating temperature up to 180 °C, the response is enhanced by two orders of magnitude. The best operating temperature for the highest gas response is found to be around 180 °C. Also, it was observed that every nanowire morphology has its own optimum operating temperature. The resistance of sensors is increased at higher Relative Humidity (RH). Besides, the response to ethanol vapor experiences a gradual increase when the RH rises from 10% to 60%. On the other hand, from 60% to 90% RH the gas response decreases gradually due to different mechanisms of interaction of the TiO2 with H2O and ethanol molecules.

17 November 2022 in Energies
Verified
Journal Article
Open access
PDF file
Saeideh PahlavanSaeideh Pahlavan
Saeideh Pahlavan
Mostafa ShooshtariMostafa Shooshtari
Mostafa Shooshtari
SAShahin Jafarabadi Ashtiani
Shahin Jafarabadi Ashtiani
Wireless power is one of the new promising technologies for IoT applications. The use of arrays for power transfer to free-moving objects has revolutionized wireless power transmission (WPT) applications. Herein, we present an extendable platform for transmitting power to a moving object receiving power from an array. The transmitter (TX) consists of two overlapping layers of square planar coils rotated 45 degrees to each other to provide the best electromagnetic flux coverage. Each layer consists of four coils to further control the power supply to the small receiver (RX) coil. This overlapping star-shaped array is stimulated automatically by a power amplifier. This smart stimulation can deliver uniform power to the receiver regardless of rotation and misalignment inconsistencies by using the geometry of the transmitter array. Moreover, by changing the direction of the current of each small square component in each array using the flower-shaped current, a receiver coil perpendicular to the transmitter’s plate can obtain power comparable with conventional structures. We use ADS-HFSS simulation to verify the fabrication and measurement results. The proposed transmitter achieves an average of 18.2% power transfer efficiency (PTE) to RX and at 90° angular misalignment, 11.5% PTE, while the conventional structure transfers no power to the perpendicular RX coil. A future application of the transmitter can be the investigation of the neurobehavioral of free-moving animals and brain–machine interface studies in medicine.

2 December 2025 in Advanced Intelligent Systems
Verified
Journal Article
Open access
Mostafa ShooshtariMostafa Shooshtari
Mostafa Shooshtari
TSTeresa Serrano-Gotarredona
Teresa Serrano-Gotarredona
Alejandro Linares-BarrancoAlejandro Linares-Barranco
Alejandro Linares-Barranco
The convergence of in‐memory computing (IMC) and neuromorphic architectures offers a promising path toward energy‐efficient, scalable artificial intelligence, particularly for edge and real‐time applications. Memristors, resistive devices with nonvolatile, analog switching, uniquely enable this convergence by serving both as computational memory units for matrix‐vector multiplication and as synaptic elements for spike‐based learning. This review comprehensively explores the physical mechanisms, material classes, and integration strategies of memristors tailored for IMC and spiking neural networks, with emphasis on their implementation in crossbar arrays, synapse‐neuron emulation, and hybrid CMOS circuits. It discusses how memristors facilitate key biological learning rules like STDP and LTP/LTD and examine their deployment in edge artificial intelligence, adaptive robotics, and neuromorphic sensors. Despite their potential, device variability, noise, relaxation, scalability limits, and standardization remain pressing challenges. By synthesizing device‐level insights with architectural innovation and emerging applications, this work outlines a roadmap toward fully integrated, low‐power, and brain‐inspired computing systems.

6 April 2023 in Nanotechnology
Verified
Journal Article
Open access
Mostafa ShooshtariMostafa Shooshtari
Mostafa Shooshtari
Delft University VollebregtDelft University Vollebregt
Delft University Vollebregt
YVYas Vaseghi
Yas Vaseghi
MRMahshid Rajati
Mahshid Rajati
SPSaeideh Pahlavan
Saeideh Pahlavan
Detection of hazardous toxic gases for air pollution monitoring and medical diagnosis has attracted the attention of researchers in order to realize sufficiently sensitive gas sensors. In this paper, we fabricated and characterized a Titanium dioxide (TiO2)-based gas sensor enhanced using the gold nanoparticles. Thermal oxidation and sputter deposition methods were used to synthesize fabricated gas sensor. X-ray diffraction analysis was used to determine the anatase structure of TiO2 samples. It was found that the presence of gold nanoparticles on the surface of TiO2 enhances the sensitivity response of gas sensors by up to about 40%. The fabricated gas sensor showed a sensitivity of 1.1, 1.07 and 1.03 to 50 ppm of acetone, methanol and ethanol vapors at room temperature, respectively. Additionally, the gold nanoparticles reduce 50 s of response time (about 50% reduction) in the presence of 50 ppm ethanol vapor; and we demonstrated that the recovery time of the gold decorated TiO2 sensor is less than 40 s. Moreover, we explain that the improved performance depends on the adsorption-desorption mechanism, and the chemical sensitization and electronic sensitization of gold nanoparticles.

15 October 2024 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
Verified
Journal Article
Open access
Mostafa ShooshtariMostafa Shooshtari
Mostafa Shooshtari