Amir Essam Almslmany

Dr. Amir Essam Almslmany

communications and electronics engineering, Air Defence College, Alexandria, Al Iskandarīyah, Egypt
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2016
Verified
Conference Paper
Closed access
Amir Essam AlmslmanyAmir Essam Almslmany
Amir Essam Almslmany
CWCaiyun Wang
Caiyun Wang
QCQunsheng Cao
Qunsheng Cao
This paper proposes a new advanced model for deceptive jamming from an airborne jammer source using DRFM based on Sub-Nyquist sampling theorem. The Shannon-Nyquist theorem shows that under sampling with lower sampling rates will be useful in generating a multiple deceptive false target signals with a better resolution, the influence of the false target signals on the ground radar receiver (victim radar) has been studied through decreasing of the sampling frequency and increasing the false targets number, so it has greatly reduced the demands on sampling rate, processing time. The probability of error for the ground radar was tested to validate our method.

1 January 2017 in IET Communications
Verified
Journal Article
Open access
PDF file
TSTamer Soliman
Tamer Soliman
FYFengfan Yang
Fengfan Yang
SESaqib Ejaz
Saqib Ejaz
Amir Essam AlmslmanyAmir Essam Almslmany
Amir Essam Almslmany
Recently, it is shown that the channel polarisation phenomenon of Arikan's polar codes with their original multilevel construction happens in several levels with perfect, partially perfect and useless bit channels. On the basis of this construction, this study aims to illustrate design principles and decoding steps of cooperative decode‐and‐forward polar coding schemes for half‐duplex relay channel. In these schemes, the authors consider the use of relay retransmission of partially perfect bit channels in time‐division process. The source node transmits its polar‐coded information to both the relay and the destination nodes during the first time slot. For the second transmission period, the relay first decodes the source signal then after reconstruction of the polarisation matrix, the extracted partially perfect bit channels are recoded using another polar code and finally transmitted to the destination node. At destination, the signals received from both source and relay nodes are processed by using multi‐stage successive cancellation decoding for retrieving the original information bits. They demonstrate via numerical results that by carefully constructed polarisation matrix at relay node, their cooperative polar coding schemes can achieve better performances than other previous schemes.

1 August 2021 in Indonesian Journal of Electrical Engineering and Computer Science
Verified
Journal Article
Open access
PDF file
AAAhmed M. Abdelmonem
Ahmed M. Abdelmonem
AAAhmed S. I. Amar
Ahmed S. I. Amar
Amir Essam AlmslmanyAmir Essam Almslmany
Amir Essam Almslmany
IAIbrahim L. Abdalla
Ibrahim L. Abdalla
FFFathi A. Farag
Fathi A. Farag
The main aim of the paper is designing and implementing a broadband low-noise-amplifier (LNA) based on compensated matching network techniquein order to get high stable gain, low noise figure, low cost and smaller sizefor 3G/4G communication system applications at 2 GHz with bandwidth 600MHz. The Advanced Design System simulates the proposed circuit (ADS).The implementation was done with a class A bias circuit and a low noise transistor BFU 730F with a lower Noise Figure (NFmin) 0.62 dB. Collectorcurrent is measured to be 5.8mA and base current is 19.1μA with a supply voltage of 2.25V. The new design proposed a (NFmin) of 0.62 dB with a 17.8dB high stable amplifier gain. The microstrip lines (MSL) and compensated matching network techniques were used to improve the LNA’s stability and achieve a good result. The LNA board is implemented and assembled on the FR4 botton layer material. The results are virtually non existence equivalent between the simulated and the measured results.

21 July 2022 in Healthcare
Verified
Journal Article
Open access
PDF file
YEYahia Zakrie Elrefaay
Yahia Zakrie Elrefaay
MYMohamed I. Youssef
Mohamed I. Youssef
TNTarek Mahmoud Nasser
Tarek Mahmoud Nasser
Amir Essam AlmslmanyAmir Essam Almslmany
Amir Essam Almslmany
ASAhmed Sayed
Ahmed Sayed
KMKarim H. Moussa
Karim H. Moussa
The use of information technology and technological medical devices has contributed significantly to the transformation of healthcare. Despite that, many problems have arisen in diagnosing or predicting diseases, either as a result of human errors or lack of accuracy of measurements. Therefore, this paper aims to provide an integrated health monitoring system to measure vital parameters and diagnose or predict disease. Through this work, the percentage of various gases in the blood through breathing is determined, vital parameters are measured and their effect on feelings is analyzed. A supervised learning model is configured to predict and diagnose based on biometric measurements. All results were compared with the results of the Omron device as a reference device. The results proved that the proposed design overcame many problems as it contributed to expanding the database of vital parameters and providing analysis on the effect of emotions on vital indicators. The accuracy of the measurements also reached 98.8% and the accuracy of diagnosing COVID-19 was 64%. The work also presents a user interface model for clinicians as well as for smartphones using the Internet of things.

1 December 2018
Verified
Conference Paper
Closed access
MTMazhar Tayel
Mazhar Tayel
MSMohamed Shehata
Mohamed Shehata
Amir Essam AlmslmanyAmir Essam Almslmany
Amir Essam Almslmany
Nowadays there are a huge progress in the Electro-optical System and the Laser weapon, not only were danger of laser weapons on the war but also civilian target. The laser warning receiver system can detect, classify, identify and give warning of the hostel laser threat aiming in a very short time with high sensitivity and it can activate the electro-optical counter measurement system, directly or with the user. In this paper we do a design and implementation for laser warning system circuit, the new purpose circuit increase the performance of the warning system and increase the detection field of view.

13 July 2021
Verified
Conference Paper
Closed access
AMAbd-Alrhman Adel Mohamed
Abd-Alrhman Adel Mohamed
MAMoustafa Ahmed
Moustafa Ahmed
MSMohamed Shehata
Mohamed Shehata
Amir Essam AlmslmanyAmir Essam Almslmany
Amir Essam Almslmany
Recently, the field of laser radiation detection LRD has witnessed a great development in the past three decades; there has been a great development in the field of semiconducting devices and optical systems to achieve high-performance LRD. Many important applications mainly depend on LRD in Civilian and military fields, like LIDAR systems, remote sensing, optical fiber communication system, and in military application laser-guided bomb LGB and laser warning receiver LWS. In all these applications, the laser sensors are chosen according to the requirements of the application in terms of sensitivity, a field of view, and the speed of the sensor's response in terms of converting the optical signal into electrical. In this paper, three-channel dichroic beam splitters, sky cameras, and a main optical system are utilized to identify the wavelengths of the incident laser radiation in the far-field. The optical system is designed to give a high-quality monochromatic image of LIDAR receivers and neglect a background noise from sunlight. The main contribution of This optical system is to reduce the electronic components and increase the optical components to enhancement the signal-to-noise ratio to achieve more than 50 dB in clear weather conditions of a LIDAR receiver by using the dichroic beam splitter technique with a sky cameras detector.