Aquatic and terrestrial environment and human health have been seriously threatened with the release of metal-containing wastewater by the rapid growth in the industry. There are various methods which have been used for removal of ions from the environment, such as membrane filtration, ion exchange, membrane assisted liquid extraction and adsorption. As a sort of special innovation, a polymerization technique, namely molecular imprinting is carried out by specific identification for the target by mixing it with a functional monomer. After the polymerization occurred, the target ion can be removed with suitable methods. At the end of this process, specific cavities, namely binding sites, are able to recognize target ions selectively. However, the selectivity of the molecularly imprinted polymer is variable not only because of the type of ligand but also charge, size coordination number, and geometry of the target ion. In this review, metal ion-imprinted polymeric materials that can be applied for metal ion removal from different sources are discussed and exemplified briefly with different metal ions.
Molecularly imprinted particles embedded composite cryogel discs specific for α-cypermethrin and β-cypermethrin were prepared. Two different types of imprinted particles were embedded into cryogel to prepare composite cryogels specific for two isomers of cypermethrin simultaneously. Adsorption studies revealed that MIP is extremely selective for α-cypermethrin and β-cypermethrin with outstanding adsorption capacity. A sensitive analytical method comprising MISPE coupled with GC-MS has been developed to quantify trace levels of α-cypermethrin and β-cypermethrin in real water matrices. The polymer showed fast kinetics and follows a pseudo-second-order kinetic model very well (R2 = 0.9999). It shows excellent capacity towards α-cypermethrin and β-cypermethrin with a higher total number of binding sites (Nt = 96 μmol g−1 for α-cypermethrin and 95 μmol g−1 for β-cypermethrin). The MIP showed selectivity over the homologues of α-cypermethrin and β-cypermethrin with imprinting factor (IF) 11.2, 10.0, 1.04 and 1.20 for α-cypermethrin, β-cypermethrin, deltamethrin and permethrin, respectively. The developed MISPE method followed by GC-MS enhanced the sensitivity and selectivity of the assay. This method was successfully applied to samples of lake water for the determination of α-cypermethrin and β-cypermethrin simultaneously. Moreover, the synthesized MIP can be easily regenerated and repeatedly used without loss of efficiency.
In this study, composite polymeric cryogel cartridges were achieved by using Cd(II) imprinted poly(hydroxyethyl methacrylate N-methacryloly-(L)-cysteine methylester) beads and poly(hydroxyethyl methacrylate) cryogel cartridges with two different mole ratios of functional monomer. The N-methacryloly-(L)-cysteinemethylester was used as a functional monomer and Cd(II) 1:1 and 2:1, which were then notated as MIP1 and MIP2, respectively. Various characterization methods have confirmed the structural transformation on the MIP1 and MIP2 composite cryogel cartridges by scanning electron microscopy, Fourier-transform infrared spectroscopy-Attenuated Total Reflectance, and swelling tests. The maximum amount of Cd(II) adsorption with composite cryogel cartridges was determined by altering the Cd(II) initial concentration, temperature, and pH values. The maximum adsorption capacity of MIP1 and MIP2 composite cryogel cartridges obtained was 76.35 and 98.8 µmol/g of composite cryogels, respectively. The adsorption studies revealed that the MIP2 possessed a good adsorption performance for Cd(II). The obtained composite cryogel cartridges have a selective, reusable, and cost-friendly potential for the removal of Cd(II) from aqueous solutions, and are used many times without decreasing their adsorption capacities significantly. The Cd(II) removal rate of the MIP1 and MIP2 composite cryogel cartridges from synthetic wastewater samples was determined as 98.8%. The obtained cryogel cartridges’ adsorption material exhibited a good directional removal performance for Cd(II) from wastewater samples.
30 July 2020 in Journal of Applied Polymer Science