Although thermionic emission has been studied for more than 100 years, recent interest in novel electron devices for military and civilian use has led to a surge in demand for cathodes with enhanced emission properties (e.g., higher current density, more uniform emission, lower operating temperatures, or extended in-service longevity). Sc-containing “scandate” cathodes have been widely reported to exhibit superior emission properties compared to previous-generation thermionic cathodes, including oxide, B-, and M-type cathodes. Despite extensive study spanning several decades, the mechanism by which the addition of Sc enhances cathode emission remains ambiguous, and nonuniform emission, low reproducibility, and inconsistent longevity continue to prevent widespread commercial integration of scandate cathodes into electron devices. This first part of a two-part review explores approaches that have been used for fabricating Sc-containing thermionic cathodes and the microstructures and emitting properties that result.
24 May 2022 in IEEE Transactions on Electron Devices
Although thermionic emission has been studied for more than 100 years, recent interest in novel electron devices for military and civilian use has led to a surge in demand for cathodes with enhanced emission properties (e.g., higher current density, more uniform emission, lower operating temperatures, or extended in-service longevity). Sc-containing “scandate” cathodes have been widely reported to exhibit superior emission properties compared to previous-generation thermionic cathodes, including oxide, B-, and M-type cathodes. Despite extensive study spanning several decades, the mechanism by which the addition of Sc enhances cathode emission remains ambiguous, and nonuniform emission, low reproducibility, and inconsistent longevity continue to prevent widespread commercial integration of scandate cathodes into electron devices. This second part of a two-part review explores the various mechanisms proposed for how Sc enhances electron emission and summarizes ongoing scientific challenges relating to the development and deployment of scandate cathodes.
Hydrogen embrittlement (HE) poses a significant challenge to the durability of materials used in hydrogen production and utilization. Disentangling the competing nanoscale mechanisms driving HE often relies on simulations and electron‐transparent sample techniques, limiting experimental insights into hydrogen‐induced dislocation behavior in bulk materials. This study employs in situ Bragg coherent X‐ray diffraction imaging to track three‐dimensional (3D) dislocation and strain field evolution during hydrogen charging in a bulk grain of austenitic 316 stainless steel. Tracking a single dislocation reveals hydrogen‐enhanced mobility and relaxation, consistent with dislocation dynamics simulations. Subsequent observations reveal dislocation unpinning and climb processes, likely driven by osmotic forces. Additionally, nanoscale strain analysis around the dislocation core directly measures hydrogen‐induced elastic shielding. These findings experimentally validate theoretical predictions and offer mechanistic insights into hydrogen‐driven dislocation behavior. The quantified nanoscale phenomena serve as critical inputs for multiscale modeling frameworks to predict bulk material responses and accelerate the development of HE‐resistant alloys.
Scandate cathodes have exhibited superior emission properties compared to current state-of-the-art “M-type” thermionic cathodes. However, their integration into vacuum devices is limited in part by a lack of knowledge regarding their functional lifespan and behavior during operation. Here, we consider thermal desorption from scandate cathodes by examining the distribution of material deposited on interior surfaces of a sealed vacuum device after ~26,000 h of cathode operation. XPS, EDS, and TEM analyses indicate that on the order of 1 wt.% of the initial impregnate is desorbed during a cathode’s lifetime, Ca does not desorb uniformly with time, and little to no Sc desorbs from the cathode surfaces (or does so at an undetectable rate). Findings from this first-ever study of a scandate cathode after extremely long-time operation yield insight into the utility of scandate cathodes as components in vacuum devices and suggest possible effects on device performance due to deposition of desorption products on interior device surfaces.
13 August 2024 in Mathematics and Mechanics of Solids
Investigating the mechanical properties of complex, porous microstructures by assessing model representative volumes is an established method of determining materials properties across a range of length scales. An understanding of how behavior evolves with length scale is essential for evaluating the material’s suitability for certain applications where the interaction volume is so small that the mechanical response originates from individual features rather than a set of features. Here, we apply the Kentucky Random Structure Toolkit (KRaSTk) to metallic foams, which are crucial to many emerging applications, among them shielding against hypervelocity impacts caused by micrometeoroids and orbital debris (MMOD). The variability of properties at feature-scale and mesoscale lengths originating from the inherently random microstructure makes developing predictive models challenging. It also hinders the optimization of components fabricated with such foams, an especially serious problem for spacecraft design where the benefit–cost–mass optimization is overshadowed by the catastrophic results of component failure. To address this problem, we compute the critical transition between the feature-scale, where mechanical properties are determined by individual features, and the mesoscale, where behavior is determined by ensembles of features. At the mesoscale, we compute distributions of properties—with respect to both expectation value and standard variability—that are consistent and predictable. A universal transition is found to occur when the side length of a cubic sample volume is ~10× greater than the characteristic length. Comparing KRaSTk-computed converged stiffness distributions with experimental measurements of a commercial metallic foam found an excellent agreement for both expectation value and standard variability at all reduced densities. Lastly, we observe that the diameter of a representative MMOD strike is ~30× shorter than the feature-scale to mesoscale transition for the foam at any reduced density, strongly implying that individual features will determine response to hypervelocity impacts, rather than bulk, or even mesoscale, structure.