This article presents the results of cyanide leaching of gold-containing concentrate using the trichlorocyanuric acid (TCCA) oxidizer. Gold-containing concentrate was obtained from a gold tailings sample from a gold recovery factory (GRF) in one of the deposits of Kazakhstan that have not previously been studied for concentrability. According to X-ray phase analysis and energy dispersive spectrometry (DSM) data, the main compounds in the tailings sample under study are pyrite FeS2, quartz SiO2, calcite CaCO3, albite NaAlSi3O8, muscovite KAl2Si3AlO10(OH)8, dolomite CaMg(CO3)2, and oxidized iron compounds. Microscopic studies of the concentrate have established the presence of ultrafine gold with sizes from Au 0.9 to 10.2 μm in pyrite. Obtaining the gold-containing concentrate with a gold content of 15.95 g/t is possible according to the enrichment scheme, which includes centrifugal separation, classification according to the fineness class −0.05 mm, additional grinding of hydrocyclone sands to a fineness of 90.0–95.0% of the class finer than 0.050 mm, and control centrifugal separation. Since pyrite in technogenic raw materials is the main gold-containing mineral, this paper presents studies on the oxidizability of pyrite with the TCCA oxidizer. The results of studies on the oxidation of pyrite using the TCCA oxidizer show the products of its hydrolysis oxidize pyrite with the formation of various iron compounds on its surface. Pretreatment of gold-containing concentrate with oxidizer TCCA for 3 h before the cyanidation process (20 h) allows for an increase in the recovery of gold in the solution by 5.8%.
Calcium oxide plays an important role in alumina production by binding SiO2 from aluminosilicate raw materials (bauxite, nepheline, kaolinite, etc.) in aluminum-free compounds. The efficiency of the hydrochemical technology depends on the activities of calcium oxide or its compounds introduced into the alkaline aluminosilicate slurry. In this paper, we considered the effects of different calcium compounds (calcium carbonate CaCO3, gypsum CaSO4·H2O, calcium oxide CaO and calcium hydroxide Ca(OH)2), introduced during the hydrothermal stripping of aluminosilicates with alkaline solutions, on the degree of aluminum oxide extraction, with the subsequent production of fillers for composites. Ca(OH)2 was obtained by the CaO quenching method. Extraction of Al2O3 in an alkaline solution was only possible with Ca(OH)2, and the degree of extraction depended on the conditions used for CaO quenching. The effects of temperature and of the duration of CaO quenching on particle size were investigated. In potassium solution, the best results for Al2O3 extraction were obtained using CaSO4·H2O gypsum. The obtained solutions were processed using the crystallization method.
The article presents the results of cyanide leaching of gold-containing concentrate using the trichlorocyanuric acid (TCCA) oxidizer. Gold-containing concentrate obtained from a gold tailings sample from a gold recovery factory (GRF) in one of the deposits of Kazakhstan that was not previously studied for concentrability. According to X-ray phase analysis and energy dispersive spectrometry (DSM) data, the main compounds in the tailings sample under study are: pyrite FeS2, quartz SiO2, calcite CaCO3, albite NaAlSi3O8, muscovite KAl2Si3AlO10(OH)8, dolomite CaMg(CO3)2, and oxidized iron compounds. Microscopic studies have established the presence of gold grains in free form, ranging in size from 0.9-10.2 mkm Au-ultrafine and fine gold. Obtaining a gold-containg concentrate with a gold content of 15.95 g / t is possible according to the enrichment scheme, which includes centrifugal separation, classification according to the fineness class -0.05 mm, additional grinding of hydrocyclone sands to a fineness of 90.0-95.0% of the class finer than 0.050 mm, and control centrifugal separation. Since pyrite in technogenic raw materials is the main gold-containing mineral, this paper presents studies on the oxidizability of pyrite with the TCCA oxidizer. The results of studies on the oxidation of pyrite using the TCCA oxidizer show that the products of its hydrolysis oxidize pyrite with the formation of various iron compounds on its surface. Pretreatment of gold-containing concentrate with oxidizer TCCA for 3 hours before the cyanidation process (20 hours) allows to increase the recovery of gold in the solution by 5.8 %.
The use of flotation reagents in the form of microemulsions significantly enhances the recovery of noble metals during the processing of gold-bearing ore and technogenic materials by improving the flotation of finely dispersed sulfides. This study investigates the effect of dibutyldithiophosphate (DBDTP) applied as emulsion microbubbles in the form of emulsion microbubbles on the flotation of gold-bearing ores and technogenic materials. The research objects were gold-bearing ore and aged flotation tailings from a Kazakhstani deposit containing 3.20 g/t and 0.62 g/t of gold, respectively. Flotation beneficiation was carried out using dispersed DBDTP generated in a water–air microemulsion generator (WAMG). The flotation kinetics results demonstrated that the application of dispersed DBDTP accelerates the flotation process, increasing gold recovery by 4.65% and reducing the gold content in flotation tailings by 0.17 g/t. Under baseline conditions, 37.51% of gold was distributed in the −25 + 0 μm size fraction of tailings with a gold content of 0.98 g/t. When the dispersed reagent produced by the WAMG was applied, the gold distribution in the −25 + 0 μm size fraction decreased to 28.29% (9.22% lower than the baseline), with a gold content of 0.62 g/t. In the flotation of aged tailings, the use of dispersed DBDTP increased gold recovery in the concentrate by 5.88% while maintaining concentrate quality.
The use of flotation reagents in the form of microemulsions significantly enhances the recovery of noble metals during the flotation of gold-bearing ore and technogenic materials by improving the hydrophobicity of finely dispersed sulfides. This study in-vestigates the effect of a microemulsified dibutyldithiophosphate (DBDTP) on the flo-tation performance of gold-bearing ore and technogenic materials. The research objects were gold-bearing ore and aged flotation tailings from a Kazakhstani deposit contain-ing 3.43 g/t and 0.62 g/t of gold, respectively. Flotation beneficiation was conducted using a microemulsion of DBDTP generated in WAMG. Flotation kinetics demonstrat-ed that the application of the DBDTP microemulsion accelerates the flotation process, increasing gold recovery by 4.65% and reducing gold content in flotation tailings by 0.17 g/t. Under the baseline regime, 37.51% of gold is distributed into the −0.025+0 mm size fraction of tailings with a gold grade of 0.98 g/t. When the microemulsion reagent produced by the WAMG is applied, gold distribution in the −0.025+0 mm size fraction decreases to 28.29% (9.22% lower than the baseline), with a gold grade of 0.62 g/t. In the flotation of aged tailings, the microemulsion application increases gold recovery in the concentrate by 5.88% while maintaining concentrate quality.
1 September 2019 in Bulletin of Experimental Biology and Medicine