In this paper the effects of adding buckling constraints to truss sizing optimization for minimizing mass are investigated. Introduction of buckling testing increases the complexity of the optimization process as Euler buckling criteria changes with each iteration of the optimization process due to the changes in element cross section dimensions. The resulting models which consider this criteria are practically applicable. For the purposes of showing the effects of dynamic constraints for buckling, optimal parametric standard test models of 10 bar, 17 bar, and 25 bar trusses from the literature are tested for buckling and compared to the models with the added constraint. Models which do not consider buckling criteria have a considerable number of elements which do not meet buckling criteria. The masses of these models are substantially smaller than their counterparts which consider buckling.
1 January 2020 in Applied Engineering Letters : Journal of Engineering and Applied Sciences
This research aims to show the effects of adding cardinality constraints to limit the number of different cross-sections used in simultaneous sizing and shape optimization of truss structures. The optimal solutions for sizing and shape optimized trusses result in a generally high, and impractical, number of different cross-sections being used. This paper presents the influence of constraining the number of different cross-sections used on the optimal results to bring the scientific results closer to the applicable results. The savings achieved using the cardinality constraint are expected to manifest in more than just the minimization of weight but in all the other aspects of truss construction, such as labor, assembly time, total weld length, surface area to be treated, transport, logistics, and so on. It is expected that the optimal weight of the structures would be greater than when not using this constraint; however, it would still be below conventionally sized structures and have the added benefits derived from the simplicity and elegance of the solution. The results of standard test examples for each different cardinality constraint value are shown and compared to the same examples using only a single cross-section on all bars and the overall optimal solution, which does not have the cardinality constraint. An additional comparison is made with results of just the sizing optimization from previously published research where authors first used the same cardinality constraint.
The influence of cardinality constraints on the simultaneous optimization of truss sizing, shape, and topology, when used for weight minimization, is explored in this study. By integrating precise cardinality constraints, the implications for achieving global optimal solutions for different numbers of different cross-sections were investigated. This research underscores the significance of these constraints in enhancing the practical applicability of optimization outcomes, particularly in complex structural configurations where traditional approaches may lead to excessive requirements of numerous different cross-sections. Comprehensive experimentation and comparative analysis, across various standard and practical truss examples, demonstrate the effectiveness of cardinality constraints in guiding optimal design configurations. Notably, the presented findings reveal a trend in weight savings, depending on the number of different cross-sections used relative to global optima, displaying the utility of this constraint in achieving practical and efficient designs. Case studies on a produced roof truss underscore the applicability of this approach in practical engineering scenarios. They offer insights into the optimal design configurations for problems that do not allow for drastic changes due to their restrictive design mandate. This research is part of continued advancements in truss optimization methodologies, with implications for promoting sustainability and cost-effectiveness in structural engineering practice. By elucidating the role of cardinality constraints in shaping the optimal design solutions, this study should contribute to the broader discourse on efficient structural design strategies.
About Me
University of Kragujevac, Faculty of Engineering, Department of Mechanical Construction and Mechanization
University of Kragujevac, Faculty of Engineering, Department of Mechanical Construction and Mechanization