Bin Ni

Dr. Bin Ni

orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 June 2017 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
BNBin Ni
Bin Ni
JXJinbiao Xiao
Jinbiao Xiao
An ultracompact and broadband polarization beam splitter (PBS) is proposed by using an asymmetrical directional coupler composed of a hybrid plasmonic waveguide (HPW) and a regular silicon wire (RSW). By properly choosing the structural parameters, transverse-magnetic (TM) mode is cutoff for the RSW and phase-matching condition is only satisfied for transverse-electric (TE) mode. As a result, the input TM-mode in HPW directly passes through, while the input TE-mode in the same HPW is coupled into the RSW. Consequently, the two polarized modes can be effectively separated. Moreover, the present PBS shows fabrication-friendly design and its length can be significantly reduced, since the gap between the HPW and RSW can be shortened to zero. From the results, a ~2.6-$\mu \text{m}$ -long PBS with a coupling length of $0.1~\mu \text{m}$ is achieved and its bandwidth is ~120 nm with a polarization extinction ratio over 14 dB, and an insertion loss below 1 dB for both polarizations. In addition, fabrication tolerances to the key structural parameters are analyzed in detail and field evolution through the designed PBS is also presented.

12 December 2018 in Optics Express
Verified
Journal Article
Closed access
PDF file
BNBin Ni
Bin Ni
JXJinbiao Xiao
Jinbiao Xiao
An ultracompact TE-pass 1 × 2 power splitter, using subwavelength grating (SWG) couplers and hybrid plasmonic gratings (HPGs), is proposed and analyzed in detail. As the input strip waveguide is tapered to a narrow wire, where TE mode is cutoff, the launched TE-mode can be evenly divided with high efficiency with the help of the SWG couplers, which are placed between the central silicon wire and two nearby output branches. The injected TM-mode will be perfectly reflected by the carefully designed HPG, whose periodically varied metal layer is located above the bottom strip and SWG waveguides. Consequently, a single device combining both the functions of polarization selection and power division can be realized. This is valuable for highly dense integrated circuits. Results show that, with a period number of 4 in HPG, the present device is only ~6.2-μm-long with an extinction ratio (ER) and an insertion loss (IL) of 25.4 and 0.53 dB at 1.55 μm, respectively, and its bandwidth of ER > 20 dB is ~180 nm with the IL < 0.8 dB, showing a broadband property. Besides, fabrication tolerances to the key dimensions are analyzed and modal field evolution through the device is also presented.

14 August 2017 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
BNBin Ni
Bin Ni
JXJinbiao Xiao
Jinbiao Xiao
A compact TE-pass polarizer for silicon wires (SWs) based on a symmetrical three-guide directional coupler (DC) is proposed, where two identical hybrid plasmonic waveguides (HPWs), including bends are symmetrically located at both sides of the central SW. By properly choosing the structural parameters, the phase-matching condition is only satisfied for TM mode. Therefore, the input TE-mode can directly pass through while the injected TM-mode will be evenly coupled to the adjacent HPWs and attenuated via the HPWs. Consequently, an efficient TE-pass polarizer is realized. With the symmetrical three-guide DC configuration, device length is significantly reduced, and more importantly, an ultralow insertion loss (IL) can be obtained. From the results, the proposed polarizer has an extinction ratio (ER) of 40.8 dB and an IL of 0.09 dB at 1.55 μm, and its bandwidth is ~160 nm for an ER > 30 dB. In addition, fabrication tolerances to the key structural parameters are analyzed and field evolution through the polarizer is also presented.

14 November 2023 in Optics Letters
Verified
Journal Article
Closed access
BNBin Ni
Bin Ni
CLChenyang Luo
Chenyang Luo
HCHanYue Chen HanYue Chen
HanYue Chen HanYue Chen
SWShengbao Wu
Shengbao Wu
LHLianping Hou
Lianping Hou
JXJichuan Xiong
Jichuan Xiong
In this Letter, an ultracompact silicon-based waveguide crossing for dual polarizations is proposed and experimentally demonstrated using subwavelength-hole-assisted multimode interference couplers. Thanks to the flexible and easy dispersion engineering in the introduced subwavelength-hole-assisted multimode interference couplers, the reduced and equal beat lengths for dual polarizations are accessible via careful parametric optimization, consequently enabling a substantially reduced device size. Experimental results indicate that the proposed crossing (13.6 × 13.6 µm2 in size) features a low insertion loss of 1.03 dB (0.76 dB) and low crosstalk of –32.5 dB (–37.8 dB) at a central wavelength of 1550 nm for TE (TM) mode, with a broad bandwidth of ∼80 nm for crosstalk of <–18 dB.

24 May 2019 in Optics Letters
Verified
Journal Article
Closed access
PDF file
BNBin Ni
Bin Ni
JXJinbiao Xiao
Jinbiao Xiao
An ultracompact silicon-based wavelength diplexer assisted by subwavelength grating (SWG) couplers is proposed for wavelengths of 1.55 and 2 μm. The embedded SWGs with the narrowed strip wires enable significantly reduced beat lengths for both wavelengths. Additionally, the use of symmetric directional couplers results in tuning of the required structural dimensions for further enhancing the device performance. As a result, the present device has a total length of only ∼13.9  μm, showing a nearly 20-fold reduction compared with the previous counterpart, and provides a high contrast (C) of 27.5 (24.7) dB, a low insertion loss (IL) of 0.14 (0.80) dB, and a low reflection loss of −30.9(−27.6)  dB for a wavelength of 1.55 (2.0) μm. Its bandwidth of C>15  dB and IL<1.2  dB exceeds 100 nm for both wavelengths. In addition, fabrication tolerances are analyzed, and the modal field evolution is presented.

18 July 2019 in Journal of the Optical Society of America B
Verified
Journal Article
Closed access
BNBin Ni
Bin Ni
JXJinbiao Xiao
Jinbiao Xiao