In most water distribution systems, a fairly sizable amount of water is lost because of leaks and faults in pipes. For this reason, the individuation of leaks is extremely important for the optimization and rationalization of water resources. However, the techniques and methodologies that are currently used for the individuation of leaks, despite being universally accepted, are extremely time-consuming and require highly-experienced personnel. Additionally, such techniques become unreliable and ineffective when the measurements are not performed in specific operating conditions of the pipe (e.g., high water pressure). On this basis, in this paper, a time domain reflectometry (TDR)-based system for the non-invasive detection of leaks in underground metal pipes is presented. Not only does the adoption of the developed system leads to accurately pinpoint the leak, but it also allows to dramatically reduce the required inspection times. The TDR-based system for leak detection is described in detail (with particular attention to the measurement principle behind the method and to the methodology). Furthermore, a strategy for enhancing the accuracy in pinpointing the leak is addressed. The proposed system is validated through experimental campaign that consisted in carrying out a leak-detection survey through the traditional methods and through the proposed method.
This paper explores the use of a microwave-reflectometry-based system for the automatic control and real-time monitoring of the flow and of the liquid level in intravenous (IV) medical infusions. In medical and hospital contexts, other kinds of devices, mainly based on the optical detection and counting of the infusion drops, are used. Nevertheless, the proposed system is aimed at circumventing some typical drawbacks deriving from the adoption of these traditional methods, thus allowing an efficient alternative for automatically monitoring the instantaneous flow of IV medical solutions. To this purpose, the proposed system combines microwave time-domain reflectometry (TDR) measurements with a noninvasive sensing element (i.e., strip electrodes directly attached to the external surface of the infusion bottle). Experimental results confirm that, by using low-cost portable TDR devices, the solution flow process can be controlled with acceptable accuracy. Therefore, the proposed method can be regarded as a promising control tool for in-hospital patient management as well as for telemedicine programs.