Back projection algorithm (BPA) and range migration algorithm (RMA) are two common approaches for image reconstruction in synthetic aperture radar (SAR) imaging. Imaging is implemented in spatial domain and spatial frequency domain, respectively and these two methods are often considered to generate the same results. This is true in normal microwave/millimeter wave SAR imaging systems, since the object of interests is located far away and the applied wavelength is long. In this case, the location of the object is the most important issue and there is no impetus to image the object with very fine details. In case of terahertz (THz) imaging, we have found some differences by using the two algorithms above, including the position of the object and resolution in 2D and 3D imaging. Some insights are given and we believe there should be some guidelines regarding the pros and cons before choosing the exact algorithm, especially when high-performance imaging is pursued.
Terahertz (THz) imaging is quite promising in scientific and biomedical applications nowadays. However, the much longer wavelength degrades the resolution of obtained images compared to classical imaging at optical frequencies. Imaging is considered to be a convolution process between the object function and point spread function (PSF) of the system. Thus, how to describe the object accurately from blurred image is an inverse problem. In this paper, we demonstrate how well such a method can function. We would illustrate how to make current facilities overcome the physical limitations in imaging, which can image at the sub-spot level. Periodical stripes with a period of 0.8 mm are resolved at 0.3 THz. The resolution is 0.32 times of the physical size of the focused beam. Moreover, this method is extended to the mathematical operations in complex domain, which is distinct from previous image studies via visible/IR light. Physically, it means that we essentially deal with phase by making use of the wave nature of THz light. For the first time, it is demonstrated that the reconstructed phase can also describe the shape of the object by applying such an approach. In addition, we have successfully measured the diameter of human hair with a relative error of less than 10% at 3 THz. As an example, we did an experiment on tissues of colorectal cancer and a better image is obtained, which would be helpful for medical diagnosis. We believe that such an approach is able to improve imaging performance at THz frequencies and many applications will gain from it.
11 January 2019 in IEEE Transactions on Terahertz Science and Technology
In this paper, a wideband method based on a 3D printed dielectric rod waveguide (DRW) is proposed to enhance the Terahertz (THz) penetration in the human skin. Two skin models are established to mimic the electro-magnetic environments in the hydrated and dehydrated skin tissue, and the characteristics of the DRW are analyzed in detail. Three human tissues embedded in paraffin are measured to test the performance of the DRW. Experimental results demonstrate that the DRW generates an average penetration enhancement of 28% from 140 to 220 GHz compared with the conventional waveguide, which is rather close to the simulation prediction. Meanwhile, the DRW can significantly increase the dynamic range of the reflection signal from the skin tissue, which is meaningful in clinical ap-plication. The design of the DRW described here can be easily applied to other THz band, and the 3D printing technique makes the fabrication flexible.
In the Robotics Assisted Surgical System, the position and orientation of the surgical tools must be estimated precisely in real time. In order to decrease the possibility of the occlusion of line-of-sight, the multi-camera optical tracking system prototype is developed. Based on this hardware platform, a novel multi-marker tracking algorithm using Extended Kalman Filter (EKF) for multi-camera tracking systems is proposed, which makes full use of the redundant information of multi-camera. The marker target movement model can benefit from multiple views by performing a special EKF updating 3D state by 2D projection observations on the image planes. This method has the advantage to estimate the movement of a 3D point more accurately by directly using the actual observations from multiple views rather than the non-continuous and possibly error-prone 3D reconstructed point. The experimental results indicate that the presented tracking algorithm is able to track the 3D trajectories of multiple targets simultaneously, and the estimated 3D positions by EKF are in agreement with the actual measurements by stereo triangulation.
1 April 2011 in International Journal of Minerals, Metallurgy and Materials