Friction stir processing (FSP) is one of the promising tools to enhance the mechanical and microstructural features of any engineering material due to its excellence in grain refinement. Further, the successful utilization of waste material into a useful product instigates the use of chicken bone powder (CBP), walnut shell powder (WSP), and rice husk powder (RHP) as secondary reinforcement to develop surface composites and metal matrix composites to enhance the mechanical properties. In the present work, a surface composite of base alloy Al6082 is developed through the utilization of SiC as primary reinforcement and CBP, WSP, and RHP as secondary reinforcement. The experiments were performed as per Taguchi’s L9 orthogonal array and the analysis of variance (ANOVA) response is discussed in detail. The process parameters taken for the study are the type of tool pin profile such as hexagonal, square, and cylindrical threaded along with rotational speed and tool tilt angle. The result revealed the microstructural characterization through field emission scanning electron microscopy (FESEM) images equipped with energy-dispersive X-ray spectroscopy (EDS) phase mapping and elemental spectrum. The tensile strength of each specimen was tested through a horizontal tensometer and further studied to get the optimized value of the process parameter to achieve a larger value. The use of a hexagonal pin profile with the optimized value of the rotational speed of 1500 rpm and 3° tilt angle gives the higher tensile strength of 250.64 MPa.
6 October 2022 in Journal of The Institution of Engineers (India): Series D
Friction Stir Processing (FSP) is a technology in which the microstructure of a material, as well as the mechanical properties of this material, is enhanced by the action of friction with a special tool. There are many applications for FSP materials which are in high demand in various industries, including aerospace, shipbuilding, instrumentation, and many others. The paper presents a study of a hybrid composite made from silicon carbide powder and rice husk (RHP) as reinforcement, included in the Al6082 aluminum alloy. The study of the characteristics of the fabricated composite was performed using an optical microscope, field emission scanning electron microscope (FESEM), X-ray diffraction (XRD) method. Tensile strength (UTS) and hardness were determined. It was revealed by microscopy that a modification of the microstructure occurs on the surface of the composite. X-ray diffraction analysis showed the presence in the spectrum of elements similar to the Al/SiC/RHP hybrid composition. It is shown that UTS tensile strength and Brinell hardness is being increased by factors of 1.36 and 1.75, respectively, compared to base aluminum material.