Olli Oja

Mr. Olli Oja

Tampere University

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 August 2019 in Metals
Verified
Journal Article
Open access
PDF file
OOOlli Oja
Olli Oja
ASAri Saastamoinen
Ari Saastamoinen
MPMadan Patnamsetty
Madan Patnamsetty
MHMari Honkanen
Mari Honkanen
PPPasi Peura
Pasi Peura
MJMartti Järvenpää
Martti Järvenpää
The intercritical annealing and isothermal bainitic processing response was studied for three Nb and V microalloyed Transformation-Induced Plasticity (TRIP)-assisted 980 MPa grade steels. Their mechanical and microstructural properties were compared to industrially produced TRIP 800 steel. Depending on the isothermal holding temperature and microalloying, the experimental steels reached properties comparable to the reference steel. The retained austenite content did not show direct correlation to elongation properties. Niobium was found to be more effective microalloying element than vanadium in increasing the elongation properties, which were investigated by measuring true fracture strain from tensile test specimens.

22 March 2019 in Metals
Verified
Journal Article
Open access
PDF file
TNTuomo Nyyssönen
Tuomo Nyyssönen
OOOlli Oja
Olli Oja
PJPetri Jussila
Petri Jussila
ASAri Saastamoinen
Ari Saastamoinen
Mahesh SomaniMahesh Somani
Mahesh Somani
PPPasi Peura
Pasi Peura
The quenching and partitioning response following intercritical annealing was investigated for three lean TRIP-type high-Al steel compositions. Depending on the intercritical austenite fraction following annealing, the steels assumed either a ferrite/martensite/retained austenite microstructure or a multiphase structure with ferritic, bainitic and martensitic constituents along with retained austenite. The amount of retained austenite was found to correlate with the initial quench temperature and, depending on the intercritical annealing condition prior to initial quenching, with the uniform and ultimate elongations measured in tensile testing.