Orfeas Panetas-Felouris

Mr. Orfeas Panetas-Felouris

Ph.D Candidate, University Of Patras
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 March 2022 in Electronics
Verified
Journal Article
Open access
PDF file
OPOrfeas Panetas-Felouris
Orfeas Panetas-Felouris
Spyridon VlassisSpyridon Vlassis
Spyridon Vlassis
This paper presents the hardware implementation of a 3rd-order low-pass finite impulse response (FIR) filter based on time-mode signal processing circuits. The filter topology consists of a set of novel building blocks that perform the necessary functions in time-mode including z−1 operation, time addition and time multiplication. The proposed time-mode low-pass FIR filter was designed in a 28 nm Samsung fully-depleted silicon-on-insulator FD-SOI process under 1 V supply voltage with 5 MHz sampling frequency. Simulation results validate the theoretical analysis. The FIR filter achieves a signal-to-noise-plus-distortion ratio (SNDR) of 38.6 dB at the input frequency of 50 KHz consuming around 200 μW.

Verified
Journal Article
Open access
PDF file
OPOrfeas Panetas-Felouris
Orfeas Panetas-Felouris
Spyridon VlassisSpyridon Vlassis
Spyridon Vlassis
This paper presents a novel circuit of a z−1 operation which is suitable, as a basic building block, for time-domain topologies and signal processing. The proposed circuit employs a time register circuit which is based on the capacitor discharging method. The large variation of the capacitor discharging slope over technology process and chip temperature variations which affect the z−1 accuracy is improved using a novel digital calibration loop. The circuit is designed using a 28 nm Samsung FD-SOI process under 1 V supply voltage with 5 MHz sampling frequency. Simulation results validate the theoretical analysis presenting a variation of capacitor voltage discharging slope less than 5% over worst-case process corners for temperature between 0 °C and 100 °C while consuming only 30 μA. Also, the worst-case accuracy of z−1 operation is better than 33 ps for input pulse widths between 5 ns and 45 ns presenting huge improvement compared with the uncalibrated operator.

5 July 2021
Verified
Conference Paper
Closed access
OPOrfeas Panetas-Felouris
Orfeas Panetas-Felouris
SVSpyridon Vlassis
Spyridon Vlassis
This paper presents a novel time register circuit suitable for time-based or time-domain signal processing. The proposed circuit is based on the capacitor discharging method and is compensated against technology process and chip temperature variations using a novel calibration loop based on master-slave approach. The loop contains a high-speed comparator based on simple current-starved inverter logic along with a triple-point threshold voltage stabilization loop. The circuit is designed using 28nm Samsung FD-SOI process under 1V supply voltage with 10MHz operating frequency. Simulation results present an almost constant capacitor voltage discharging slope of the time register over worst case process corners and temperature between 0°C and 100°C while consuming only 10μA.

KPKonstantinos Panagiotis Pagkalos
Konstantinos Panagiotis Pagkalos
OPOrfeas Panetas-Felouris
Orfeas Panetas-Felouris
Spyridon VlassisSpyridon Vlassis
Spyridon Vlassis
In this work, a first-order low-pass filter is proposed as suitable for time-mode PWM signal processing. In time-mode PWM signal processing, the pulse width of a rectangular pulse is the processing variable. The filter is constructed using basic time-mode building blocks such as time registers and time adders and so it is characterized by low complexity which can lead to the modular and versatile design of higher-order filters. All the building blocks of the filter were designed and verified in a TSMC 65 nm technology process. The sampling frequency was 5 MHz, the gain of the filter at low frequencies was at −0.016 dB, the cut-off frequency was 1.2323 MHz, and the power consumption was around 59.1 μW.

1 April 2019
Verified
Conference Paper
Closed access
SVSpyridon Vlassis
Spyridon Vlassis
OPOrfeas Panetas-Felouris
Orfeas Panetas-Felouris
GSGeorge Souliotis
George Souliotis
FPFotis Plessas
Fotis Plessas
In this work, a new current-to-time converter (CDC) based on current-starved inverter is proposed. The time delay of the output pulse edges is linearly proportional to a control current. The benefits of the proposed topology are simple circuit topology, linear current-to-time characteristic with positive or negative slope for both rising and falling edges. The circuit is designed and tested using 0.35um CMOS process under 3V supply voltage. The linearity error is less than 2.1% in a range of 5nsec of time delays with a clock frequency of 50MHz.

1 July 2020
Verified
Conference Paper
Closed access
OPOrfeas Panetas-Felouris
Orfeas Panetas-Felouris
SVSpyridon Vlassis
Spyridon Vlassis
GSGeorge Souliotis
George Souliotis
VPVasileios Panagiotopoulos
Vasileios Panagiotopoulos
A 2.4 GHz digital-controlled oscillator (DCO) based on a novel capacitor tank suitable for all-digital Bluetooth Low Energy (BLE) transmitter is proposed in this paper. The capacitive element which is responsible for Gaussian Frequency Shift Keying (GFSK) modulation is constructed by a single nMOS device with simple topology, designed in a fully depleted silicon on insulator (FDSOI) process. The proposed capacitive element can offer capacitance difference in the range of a few aF with constant step. Consequently, it can provide accurate linear changes in frequency of a few KHz as required by the standard. The DCO circuit has been designed and simulated on a 2S nm FDSOI CMOS process, operating with 1V supply voltage and dissipating 1.5 mA. The phase noise is around -113 dBc at 1 MHz.