Fungal pigments, specifically those generated from spalting fungi, are being developed for broader use in the wood and textile industry, and due to their coloration properties, may also be useful as aesthetic bamboo dyes. This paper evaluates the potential use of fungal pigments in bamboo (Phyllostachys spp.), and compares the difference between natural spalting and the direct application of extracted fungal pigments of three known spalting fungi: Scytalidium cuboideum, Scytalidium ganodermophthorum, and Chlorociboria aeruginosa. Bamboo was significantly spalted by S. cuboideum under live inoculation, while the other two fungi did not colonize. For the direct application of fungal pigments, bamboo did not develop internal pigmentation with any pigment, but did develop visible surface color for S. cuboideium and C. aeruginosa. Light microscopy and scanning electron microscopy confirmed the presence of hyphae in bamboo vessels and parenchyma. An HPLC analysis for simple sugars showed the presence of glucose but no sucrose. Results indicate that the extracted pigments of the aforementioned fungi are ideal for the surface treatment of bamboo, while only direct inoculation of S. cuboideum is appropriate for internal coloration.
UV-light degradation of wood is one of the top reasons for consumer replacement of outdoor wooden structures. This type of degradation is seldom mechanical, and is instead often motivated by loss of aesthetics (graying). There are numerous commercial products available on the market that deal with this loss of color, many of which contain added pigments to ‘rejuvenate’ or ‘revitalize’ greyed wood. These pigments are almost uniformly synthetic. In contrast, pigments from wood decay fungi (spalting), which have been used in woodworking since the 1400s (intarsia), have remarkable optical (UV-light resistance) properties due to their naphthoquinonic configuration. In recent years the pigments made from these fungi have been extracted and tested across numerous substrates, from solar cells to textile dyes. In this work, researchers extracted pigments from Scytalidium cuboideum (red pigmentation) and Chlorociboria aeruginosa (blue-green pigmentation), solubilized the pigments in raw linseed oil, and tested the resulting solution on samples of Douglas-fir (Pseudotsuga menziesii) and western white pine (Pinus monticola). These mixtures were compared against a ‘stain and coat’ treatment (utilizing an aniline stain and coated with raw linseed oil), raw linseed oil, and untreated wood. The wood samples were then placed in an accelerated weathering machine (Q-UV) following the ASTM G154 standard, for 500 and 1000 h. The results showed that while no visible color change occurred to the wood when the pigmented oil was applied, the red pigment oil significantly lowered the coating degradation for both wood types at an exposure of 500 h. The results show the potential applications for fungal pigments in the wood coating industry, as it offers an increased coating service life. As there is a shift to renewable products, the pigments from wood decay fungi show potential as additives for wood coatings.
The process of using fungal-colored wood (spalted wood) for marquetry and intarsia woodworks in Italy and Germany was very popular from the 1400–1600s, with some instances continuing as late as the 1800s. While spalted marquetry in these countries is relatively well documented, less is known about its use in other parts of Europe. One of the primary reasons for this lack of knowledge is the difficulty in identifying spalted wood, especially the blue-green variety produced from Chlorociboria species, from wood dyed with copper-based compounds or other synthetics. The most reliable testing method involves destructive sampling, where a small piece is taken from the work, the pigment extracted, and an analysis performed. Such sampling is simply not feasible, nor often allowed, on ancient artwork. To make a reliable, non-destructive identification of spalted wood, a visual method based on anatomical characteristics of spalted wood was developed to differentiate spalted wood from dyed wood. High-resolution pictures were taken from wooden artifacts containing blue-green colored wood in collections at the National Museum of Decorative Arts (MNAD), the Royal Site Monastery El Escorial and the Bilbao Museum of Fine Arts in Spain. The concentration of pigment in the rays, the color distribution, the size of the piece and the date of production, were analyzed. With the use of this new visual method, it was possible to determine that intarsia artifacts, held in Spain but of Augsburg origin from the 1500–1600s, contained spalted wood details. Meanwhile, Spanish and Italian intarsia artifacts from the 1800s were found to only contain dyed wood.
2 January 2020 in European Journal of Wood and Wood Products
Although wooden cutting boards have been used for centuries, debate remains on how best to coat/seal the boards for microbial protection. A growing body of the literature points to the hygroscopicity of wood—its ability to draw water and bacteria from its surface, deep into the wood, where the bacteria are trapped and die—as the wood attempts to even out its moisture content. There is little research as to how coatings affect this mechanism. In this study, four wood species were coated with either a hardening or nonhardening oil and then, were inoculated with either Listeria or Salmonella, then ‘stamped’ onto sterile agar plates at given time intervals to check microbial growth. The coated woods had significantly more recoverable bacteria on their surface than did the uncoated samples. There was no significant difference in performance between the oils. Remaining bacterial loads did vary significantly by wood species, with European beech having significantly less surface bacteria when inoculated with Salmonella, and the oak species having significantly less surface bacteria with Listeria. Multiple factors appeared to affect the ability of wood to move bacteria from its surface, including porosity of the wood, type of bacteria applied, and time. These results run counter to popular understanding of wood cutting board maintenance and will hopefully impact the way households and professional kitchens use and care for their food-contact wood in the future.