This paper outlines a methodology for structuring a generic database of environmental impacts on the end-of-life phase of buildings, which can be used at the national level, in accordance with European standards. A number of different options are also considered for managing construction and demolition waste (CDW), as well as for promoting the circularity of materials in construction. The database structure has been developed for use by the main stakeholders who decide the disposal scenario for the main CDW flows, assess waste management plans, and identify the corresponding environmental aspects. The impact categories considered in this paper are global warming potential (GWP) and the abiotic depletion potential of fossil fuels (ADP (f.f.)). This lifecycle assessment (LCA) database further facilitates the identification of important information, such as possible treatments for CDW, or suppliers of recycled materials for use in new construction. Two demolition case studies were used to confirm the benefits of the proposed database. Two demolition scenarios are assessed—traditional and selective—in order to demonstrate the advantage of selective demolition in waste management. The results obtained from the environmental assessment of CDW flows demonstrate that the proposed database can be an important and useful tool for decision making about the end-of-life of construction materials, as it is designed to maximize their reuse and recycling. An innovative online platform can be created based on this database, contributing to the reduction of the environmental impacts associated with the end-of-life phase of buildings.
The construction sector is one of the largest creators and distributors of wealth, contributing to economic growth worldwide. However, this economic growth comes together with very high environmental impacts. Thus, rehabilitation solutions that can adapt the current building stock to today’s structural requirements are needed, increasing structural safety, while avoiding the production of demolition waste and the extraction of virgin raw materials, hence lowering the construction sector’s environmental impacts. Such rehabilitation solutions need to be environmentally and economically sound so that stakeholders can make informed decisions based on their needs and priorities. This paper presents a case study of an existing reinforced concrete beam, whose flexural resistance is increased using four alternative strengthening solutions: concrete jacketing, without and with increasing the cross-section size, and plate bonding, using either carbon fibre-reinforced polymer (CFRP) strips or steel plates. These solutions are studied via an environmental and economic cradle-to-gate life cycle assessment (LCA), resulting in a comprehensive comparison of their environmental and economic impacts, followed by a multicriteria and sensitivity analysis and eco-cost approach to determine the optimal solution. According to the criteria considered in the study, when environmental impacts are more valued, the concrete jacketing solution presents the best results and, when cost is dominant in the decision, the bonding of CFRP strips becomes the optimal solution.
The energy performance and thermal comfort of buildings are decisive factors for users. Thus, solutions such as the external thermal insulation systems (ETICS) that can be installed in either new buildings or buildings under thermal retrofitting, reducing the energy consumption while improving thermal comfort, tend to become mainstream. This paper purposes to quantify the environmental and economic impacts of various ETICS protection solutions to assist in decision-making at the project phase. In this study, products available on the Portuguese market are considered. The protection products considered are hydrophobic agents, biocides, multifunctional, and self-cleaning. The products are compared by type of protection, presenting some of the most impactful components, following a multicriteria analysis of some of those products gathered into different solutions, with the objective of demonstrating the influence of the weights assigned to environmental and economic indicators. Several data-linked problems were identified, such as the quantity and quality of data available for analysis, crucial to their reliability; thus, an index for quality of information was developed in order to compare different products. In the multicriteria analysis, the weights of the sensitivity analysis between environmental and economic indicators highly influence the “best solution”; therefore, stakeholders need to clearly define their objectives.
One of the main issues with applying Circular Economy (CE) principles to the construction sector sits at the End-of-Life (EoL) of buildings. How to recover the materials and then how to reintroduce them into the economy are fundamental problems that lack immediate solutions. The status quo in the EoL of buildings has always been demolition followed by deposition at a landfill (linear economy), thus, to change this approach, there is the need to replace demolition with deconstruction. This causes new problems, as buildings vary greatly, there is a need for pre-demolition audits, that can report on the recoverable materials, potential generated waste and plan the deconstruction intervention. Here, new problems arise, such as the lack of methodologies to intervene or skilled labour that makes deconstruction possible. However, at that point, even when materials are recovered there is the problem of how to reintroduce those materials back into the market. Here, digital platforms can bridge that gap, making it possible for the recovered materials to be posted in a marketplace where the designers of new buildings (or building renovations) can access the circular materials available to introduce into their designs. Thus, this paper aims to present a possible solution to the problem of introducing CE into the built environment, proposing pre-demolition audits, digital platforms, and labour upskilling as enablers for a greener future.
1 December 2025 in IOP Conference Series: Earth and Environmental Science
The construction sector faces important environmental challenges, notably resource depletion and significant waste generation. This study introduces the concept of Archetypes of Deconstruction (AoD), a methodology integrating Life Cycle Assessment (LCA) into pre-demolition audits that aims to enhance circular economy practices and their adoption in end-of-life buildings. AoD defines standardized deconstruction scenarios, with the objective of pre-emptively predicting environmental impacts and recovery potentials showing the value and benefits of deconstruction and material recovery compared to traditional demolition practices. Using key enabling digital technologies, the AoD aims to improve the precision and efficiency of audits. Further, the integration with Digital Product Passports (DPP) ensures thorough lifecycle tracking of materials, facilitating their reuse through commercialization in future construction projects using digital marketplaces and eventual integration with BIM. This approach aims to support stakeholders in making informed decisions regarding material recovery, promoting circularity, and eventually reducing waste and raw material consumption while considering GHG emissions and environmental sustainability in the process. Ultimately, AoD aims to enhance the sustainability of the construction sector, by estimating and communicating the environmental impacts of circular deconstruction practices in a pre-demolition stage, thus supporting broader industry adoption.
Large infrastructure projects are significant for societal and economic development, involving different types of infrastructure and many stakeholders. This chapter outlines the stages of the project life cycle, emphasizing the importance of stakeholder engagement at all stages for successful project outcomes. The stages include initiation, planning, execution, monitoring and control, and closure, each with defined objectives, outcomes, and decision-making activities. Due to the complexity of infrastructure projects, effective stakeholder relationship management is essential. The chapter emphasizes the need for continuous communication, strategic engagement, and proactive risk management to align project objectives with stakeholder interests. Case studies and literature reviews show how stakeholder participation improves project performance, sustainability, and societal impact. The findings highlight the importance of integrating stakeholder perspectives to achieve effective project management and meet performance indicators, ultimately leading to successful project implementation and long-term societal benefits. In order to characterize the role of stakeholders, mutual relations and obstacles to the implementation of the circular economy outside the European Union, the case of Albania, which will soon become a potential member state of the European Union, is analyzed. The problems with the involvement of interested parties in the implementation of the infrastructure project and the benefits and obstacles are similar for both the member state of the European Union and the countries that are just about to become one.