Penpisuth Thongyoug

Ms. Penpisuth Thongyoug

Silpakorn University
+1
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 October 2021 in Materials at High Temperatures
Verified
Journal Article
Closed access
Penpisuth ThongyougPenpisuth Thongyoug
Penpisuth Thongyoug
SCSomrerk Chandra-ambhorn
Somrerk Chandra-ambhorn
JTJennarong Tungtrongpairoj
Jennarong Tungtrongpairoj
High-temperature corrosion has been a critical issue for coal-fired boiler steels, particularly Cr-containing steels SA213-T22, for many decades. Hot combustion gases containing CO2, CO, N2, and unburnt carbon particles play a significant role in the degradation of oxide scale due to reduction reactions. However, carbide precipitation can occur in the oxide layer by carburisation reactions. The effects of reduction and carburisation on the oxide scale of SA213-T22 steel in a simulated combustion atmosphere by carbothermic reduction were investigated and compared with ferritic stainless steels SS430. The two steels were oxidised under an air atmosphere at 750 °C for 48 hours and heated afterwards in graphite powder at 950–1350 °C for 30–60 minutes. After the oxidation test, a thick porous oxide layer of Fe2O3 was found on the SA213-T22 and a thin Fe-Cr-Mn oxide film was found on SS430 as shown by X-ray diffraction analysis. Most oxide scales on SS430 were reduced and destroyed by carbothermic reduction at 1350 °C but the oxide scale on SA213-T22 transformed to compact mixed phases of Fe-C and Fe-C-Cr-O by carburisation and carbon diffusion. The compact oxide layer with heat resistant carbides can increase wear resistance and might withstand corrosive atmospheres in coal-fire boiler plants.

1 November 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
Penpisuth ThongyougPenpisuth Thongyoug
Penpisuth Thongyoug
JTJennarong Tungtrongpairoj
Jennarong Tungtrongpairoj
The waste chromium-oxide rods from thermal spray processes contained the valuable components of high chromium. The carbothermic reduction with graphite powders can be used to recover the chromium from the chromium-oxide rod. The waste rods were prepared into small pieces with a half-dimensions of 6.3 mm diameter and 5 mm length, and heated under the reducing atmosphere at 1150 – 1350 °C. Besides, the effect of different types and sizes of reducing agent on the reduction was observed. During the heating and cooling period, argon gas was fed into the atmosphere. Chromium carbide formation was promoted when the temperature and time were increased. Cr-O and Cr-O-Al-Si were observed in the microstructures before and after the reduction. The outermost part of the waste rod can be reduced to chromium because of the interphase zone. Consequently, the carbothermic reduction is one possible recycling method for utilizing ceramic rod wastes from the thermal spray process.

3 August 2020 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
JTJennarong Tungtrongpairoj
Jennarong Tungtrongpairoj
Penpisuth ThongyougPenpisuth Thongyoug
Penpisuth Thongyoug
PSPhichai Saranyachot
Phichai Saranyachot
SCSomrerk Chandra-Ambhorn
Somrerk Chandra-Ambhorn
AISI 304 austenitic stainless steel specimens are oxidised in laboratory air at 750 °C for 48 h. They are further subjected to the reduction test in carbon at 1350 °C for 30 and 60 min. The results show that the mass gain of the oxidised AISI 304 slighter increases to be 0.08 mg cm–2 after the reduction for 30 min and is unchanged at the longer reduction period up to 60 min. The oxide on AISI 304 is deteriorated after the reduction but its morphology tends to be unchanged when the reduction period is longer from 30 to 60 min. The results then indicate the superior performance of the AISI 304 to combat the corrosion under carbon at this high temperature.

1 January 2023 in AIP Conference Proceedings
Verified
Conference Paper
Open access
PDF file
MBMack Boonpensina
Mack Boonpensina
TTThammaporn Thublaor
Thammaporn Thublaor
Penpisuth ThongyougPenpisuth Thongyoug
Penpisuth Thongyoug
PPPiyorose Promdirek
Piyorose Promdirek
CTChayada Teanchaie
Chayada Teanchaie
The objective of this research is to study the effect of impact angles and particle velocities on the solid particle erosion behavior of boiler steel (Fe-23Cr-8

29 October 2025 in Solid State Phenomena
Verified
Journal Article
Closed access
PDF file
RNRatchapon Nilprapa
Ratchapon Nilprapa
SCSaowaluk Chaleawlert-Umpon
Saowaluk Chaleawlert-Umpon
PTPaweena Treewiriyakitja
Paweena Treewiriyakitja
Penpisuth ThongyougPenpisuth Thongyoug
Penpisuth Thongyoug
JTJennarong Tungtrongpairoj
Jennarong Tungtrongpairoj
One candidate material for boiler components in supercritical water gasification (SCWG) processes is oxide dispersion-strengthened steels (ODS), which can resist aggressive humidified atmospheres under high pressures and temperatures. The high-temperature oxidation resistance of ODS steel can be improved by adding nanooxide particles such as Al 2 O 3 . In this study, the corrosion resistance of Fe-18Cr ferritic ODS steel reinforced with different nanoAl 2 O 3 between 0.5-3.0 wt% in a humidified atmosphere containing 80% H 2 O at 800 °C was investigated. The lump phase of chromium and nanoAl 2 O 3 particles were dispersed on iron matrixes after sintering. Several pores occurred in the Fe-18Cr ODS matrix due to air entrainment during forming processes, but they decreased after reinforcing with the nanoAl 2 O 3 . Adding 0.5 wt% nanoAl 2 O 3 decreased the porosity of the ODS steel by around 1.8 times. After the oxidation test for 10 hours, the mass gain of the ferritic ODS steel decreased by about 9 % when the nanooxide was added. Fe-Al-rich oxides were found with hematite and Fe-Cr spinel oxide layers, which increased the oxidation resistance of the ODS steel.

1 August 2021 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
Penpisuth ThongyougPenpisuth Thongyoug
Penpisuth Thongyoug
PTPaweena Treewiriyakitja
Paweena Treewiriyakitja
MKMethawat Keereerakwattana
Methawat Keereerakwattana
JTJennarong Tungtrongpairoj
Jennarong Tungtrongpairoj
This work reveals the high-temperature oxidation resistance of WC-Co coated on SA213-T22 by High-Velocity Oxy-Fuel (HVOF) technique in simulated molten salt atmospheres and compare that with the uncoated Cr-containing steel. The corrosion behaviors of SA213-T22 coated and uncoated with WC-Co alloys were studied by immersion test under simulated molten salt atmospheres at 600 °C for 3 hours and investigated their corrosion current densities by electrochemical test. Scanning electron microscope equipped with EDS technique and X-ray diffraction were used to evaluate the surface morphology and phase constitution. The oxidation rate of the coated and uncoated steels was observed under simulated atmospheres at 750 °C for 120 hours before the immersion test. The mass gain scale increase with increasing the oxidation time and the oxidation rate of scale are limited by the WC-Co alloys coating layer, which acted as a protective layer. The low corrosion current density of the WC-Co self-fluxing coated steel after oxidation was shown 5 – 10 μA/cm 2 after the corrosion test in molten salt for 3 hours. After the immersion, the scale layer on the uncoated specimen was disappeared, but one-half of the oxidized coating layer on the coated specimen has remained.