Peter Lewis

Mr. Peter Lewis

Materion (United Kingdom), Theale, UK
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2024 in Crystals
Verified
Journal Article
Open access
PDF file
Peter LewisPeter Lewis
Peter Lewis
ATAndrew David Tarrant
Andrew David Tarrant
AFAndreas Frehn
Andreas Frehn
FGFritzCarl Grensing
FritzCarl Grensing
JNJames Nicholson
James Nicholson
MAMartyn Acreman
Martyn Acreman
With the ever-growing emphasis on global decarbonization and rapid increases in the power densities of electronics equipment in recent years, new methods and lightweight materials have been developed to manage heat load as well as interfacial stresses associated with coefficient of thermal expansion (CTE) mismatches between components. The Al–Si system provides an attractive combination of CTE performance and high thermal conductivity whilst being a very lightweight option. Such materials are of interest to industries where thermal management is a key design criterion, such as the aerospace, automotive, consumer electronics, defense, EV, and space sectors. This paper will describe the development and manufacture of a family of high-performance hypereutectic Al–Si alloys (AyontEX™) by a powder metallurgy method. These alloys are of particular interest for structural heat sink applications that require high reliability under thermal cycling (CTE of 17 μm/(m·°C)), as well as reflective optics and instrument assemblies that require good thermal and mechanical stability (CTE of 13 μm/(m·°C)). Critical performance relationships are presented, coupled with the microstructural, physical, and mechanical properties of these Al–Si alloys.

25 January 2023 in Advanced Engineering Materials
Verified
Journal Article
Open access
RRRebecca Reiff-Musgrove
Rebecca Reiff-Musgrove
MGMarcus Gaiser-Porter
Marcus Gaiser-Porter
WGWenchen Gu
Wenchen Gu
JCJimmy E. Campbell
Jimmy E. Campbell
Peter LewisPeter Lewis
Peter Lewis
BCBill Clyne
Bill Clyne
Herein, it is concerned with the use of profilometry‐based indentation plastometry (PIP) to obtain mechanical property information for particulate metal matrix composites (MMCs). This type of test, together with conventional uniaxial testing, has been applied to four different MMCs (produced with various particulate contents and processing conditions). It is shown that reliable stress–strain curves can be obtained using PIP, although the possibility of premature (prenecking) fracture should be noted. Close attention is paid to scale effects. As a consequence of variations in local spatial distributions of particulate, the “representative volume” of these materials can be relatively large. This can lead to a certain amount of scatter in PIP profiles and it is advisable to carry out a number of repeat PIP tests in order to obtain macroscopic properties. Nevertheless, it is shown that PIP testing can reliably detect the relatively minor (macroscopic) anisotropy exhibited by forged materials of this type.

17 April 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
Peter LewisPeter Lewis
Peter Lewis
ATAndrew David Tarrant
Andrew David Tarrant
AFAndreas Frehn
Andreas Frehn
FGFritzCarl Grensing
FritzCarl Grensing
JNJames Nicholson
James Nicholson
MAMartyn Acreman
Martyn Acreman
With the ever-growing emphasis on global decarbonization and rapid increases in the power density of electronics equipment in recent years, new methods and lightweight materials have been developed to manage heat load as well as interfacial stresses associated with Coefficient of Thermal Expansion (CTE) mismatch between components. The Al-Si system provides an attractive combination of CTE performance and high thermal conductivity whilst being a very lightweight option. Such materials are of interest to industries where thermal management is a key design criterion, such as aerospace, automotive, consumer electronics, defense, EV and space. This paper will describe the development and manufacture of a family of high-performance hypereutectic Al-Si alloys (AyontEX™) by a powder metallurgy method. These alloys are of particular interest for structural heat sink applications that require high reliability under thermal cycling (CTE of 17μm/(m·°C)) as well as reflective optics and instrument assemblies that require good thermal and mechanical stability (CTE of 13μm/(m·°C)). Critical performance relationships are presented, coupled with the microstructure, physical and mechanical properties of these Al-Si alloys.

9 April 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
TVThomas Virazels
Thomas Virazels
JGJavier García-Molleja
Javier García-Molleja
AFAndreas Frehn
Andreas Frehn
Peter LewisPeter Lewis
Peter Lewis
JRJose Antonio Rodriguez-Martinez
Jose Antonio Rodriguez-Martinez
IRIgnacio Romero
Ignacio Romero
This work investigates the mechanics of plastic shock propagation and spall fracture in metal matrix composites. To this end, 53 planar plate impact experiments were conducted over an impact velocity range from 159.1 to 697.2 m/s on four SupremEX® material systems based on aerospace-grade aluminum alloys reinforced with ultrafine SiC particles---probing high strain rate conditions that have received limited attention for this class of advanced composites. The four materials span variations in heat treatment, reinforcement volume fraction, particle size, and matrix alloy, resulting in distinct influences on yield strength, tensile strength, and ductility. Photonic Doppler velocimetry was employed to measure the free surface velocity of the target, from which the shock velocity, shock stress, and spall strength were derived. These measurements were analysed within a Bayesian calibration framework, providing a statistically consistent inference of shock and spall properties across the different material systems, while accounting for experimental uncertainty and specimen-to-specimen variability in the mechanical response. To the authors' knowledge, this work constitutes the first application of a Bayesian inference framework to the combined analysis of shock and spall data from plate impact experiments in metal matrix composites, establishing a rigorous basis for probabilistic comparison of material responses and for uncertainty-aware modeling of dynamic failure. In addition, the specimens were soft-recovered and examined by scanning electron microscopy and X-ray tomography. The investigated impact velocities span the transition from incipient spall, characterized by discontinuous cracking and limited void growth, to spallation-induced specimen fragmentation. X-ray tomography provided three-dimensional reconstructions of the spall morphology, yielding quantitative information on the evolution of fracture size and volume with increasing impact velocity. Scanning electron microscopy revealed characteristic damage features associated with spallation—including void growth and coalescence, intervoid cracking, particle/matrix debonding, and localized particle fracture—and showed that fracture morphology varies among the composite systems, reflecting the influence of reinforcement architecture on damage evolution. Together, these observations establish a direct connection between microstructural damage evolution and the macroscopic shock and spall response of the four advanced metal matrix composite systems under the investigated loading conditions.

10 June 2026 in Journal of Physics: Materials
Verified
Journal Article
Open access
MLMarcello Lappa
Marcello Lappa
PCPhilip Carvil
Philip Carvil
VVValentina Valentina
Valentina Valentina
P. Salgado SánchezP. Salgado Sánchez
P. Salgado Sánchez
JNJose Miguel Ezquerro Navarro
Jose Miguel Ezquerro Navarro
KKKatie King
Katie King
Materials science underpins national economies and infrastructures worldwide, contributing significantly to the delivery of key services, as well as underpinning multiple industrial sectors, including space. The space sector, represents a cornerstone of technological progress, driving both direct and indirect innovation across many terrestrial fields. Taken together, materials science and the space sector represent a transformative frontier for innovation that remains only partially exploited, offering opportunities for scientific, economic, and societal advancement. In this context, this roadmap presents a special focus on where such interplay can yield fruitful outcomes over the next two decades, exploring specific intersections between these fields. The rationale behind this is routed in the current demand and forward view for specialised materials to address both terrestrial challenges and extraterrestrial ambitions, with the global space economy projected to reach $1.8 trillion by 2035, requiring a concerted focus on interdisciplinary collaboration. Microgravity provides a unique platform to achieve this, enabling critical insights, more precise control over material formation and the creation of advanced materials with enhanced properties for diverse applications. These breakthroughs are already informing terrestrial applications across industries, from semiconductors to pharmaceuticals, while laying the groundwork for advanced manufacturing in space. Emerging sectors such as the “In-Orbit Economy” and in-situ resource utilisation (ISRU) further underscore this critical opportunity, emphasising the need for resilient materials that can withstand the harsh conditions of space and utilise extraterrestrial resources sustainably. This roadmap brings together a diverse array of contributions covering relevant subjects across these areas—from space exploration and ISRU to the production of new inorganic, organic, and even “living” materials on microgravity platforms—while paying special attention to concrete examples, i.e. cases with a technological readiness level of 4 or higher, which warrant continued attention and effort.

12 September 2026 in International Journal of Plasticity
Verified
Journal Article
Open access
TVT. Virazels
T. Virazels
JGJavier García-Molleja
Javier García-Molleja
AFA. Frehn
A. Frehn
Peter LewisPeter Lewis
Peter Lewis
JRJ.A. Rodríguez-Martínez
J.A. Rodríguez-Martínez
IRIgnacio Romero
Ignacio Romero