Most biological rates depend on the rate of respiration. Temperature variation is typically considered the main driver of daily plant respiration rates, assuming a constant daily respiration rate at a set temperature. Here, we show empirical data from 31 species from temperate and tropical biomes to demonstrate that the rate of plant respiration at a constant temperature decreases monotonically with time through the night, on average by 25% after 8 h of darkness. Temperature controls less than half of the total nocturnal variation in respiration. A new universal formulation is developed to model and understand nocturnal plant respiration, combining the nocturnal decrease in the rate of plant respiration at constant temperature with the decrease in plant respiration according to the temperature sensitivity. Application of the new formulation shows a global reduction of 4.5 −6 % in plant respiration and an increase of 7-10% in net primary production for the present-day.
This study investigates the use of a drone equipped with a thermal camera for recognizing wild mammal species in open areas and to determine the sex and age of red deer (Cervus elaphus) and roe deer (Capreolus capreoulus) in a 13 km2 moor in Denmark. Two separate surveys were conducted: (1) To achieve drone images for the identification of mammals, the drone was tested around a bait place with a live wildlife camera that was often visited by European badger (Meles meles), stone marten (Martes foina), European hare (Lepus europaeus), roe deer and cattle (Bos taurus). The thermal images of wild animal species could be distinguished by their body measures when the drone filmed with the camera pointed perpendicular to the ground in an altitude range of 50–120 m. A PCA ordination showed nonoverlapping body characteristics and MANOVA showed that the combined body measures used were significantly distinctive F = 6.8, p < 0.001. The reactions and behavioral responses of the different species to the altitude and noise of the drone were also tested in this place. (2) On a 13 km2 moor, a drone was used for a population study of deer. Red deer and roe deer were counted and separated by body measures. Red deer individuals could, at the right altitude, be separated into adults and calves, and males and females. Body length was the most conclusive body measure, and therefore a reference measurement in the field is recommended. The frame thermal images were effective in species recognition and for use in population studies of deer, and are thought to be more time-efficient and less invasive than traditional methods. In autumn, the number of stags and the life stage of red deer, as well as the distribution of deer in different types of vegetation, could be determined.
Wildlife monitoring can be time-consuming and expensive, but the fast-developing technologies of uncrewed aerial vehicles, sensors, and machine learning pave the way for automated monitoring. In this study, we trained YOLOv5 neural networks to detect points of interest, hare (Lepus europaeus), and roe deer (Capreolus capreolus) in thermal aerial footage and proposed a method to manually assess the parameter mean average precision (mAP) compared to the number of actual false positive and false negative detections in a subsample. This showed that a mAP close to 1 for a trained model does not necessarily mean perfect detection and provided a method to gain insights into the parameters affecting the trained models’ precision. Furthermore, we provided a basic, conceptual algorithm for implementing real-time object detection in uncrewed aircraft systems equipped with thermal sensors, high zoom capabilities, and a laser rangefinder. Real-time object detection is becoming an invaluable complementary tool for the monitoring of cryptic and nocturnal animals with the use of thermal sensors.
Wildlife abundance surveys are important tools for making decisions regarding nature conservation and management. Cryptic and nocturnal mammals can be difficult to monitor, and methods to obtain more accurate data on density and population trends of these species are needed. We propose a novel monitoring method using an aerial drone with a laser rangefinder and high zoom capabilities for thermal imagery. By manually operating the drone, the survey area can be initially scanned in a radius of several kilometers, and when a point of interest is observed, animals could be identified from up to one kilometer away by zooming in while the drone maintains an altitude of 120 m. With the laser rangefinder, a precise coordinate of the detected animal could be recorded instantly. Over ten surveys, the scouring drone method recorded significantly more hares than traditional transect spotlight count surveys, conducted by trained volunteers scanning the same farmland area within the same timeframe (p = 0.002, Wilcoxon paired rank test). The difference between the drone method and the transect spotlight method was hare density-dependent (R = 0.45, p = 0.19, Pearson’s product–moment correlation); the larger the density of hares, the larger the difference between the two methods to the benefit of the drone method. There was a linear relation between the records of deer by the drone and by spotlight (R = 0.69, p = 0.027), while no relation was found between the records of carnivores by drone and spotlight counts. This may be due to carnivores’ speed and vigilance or lack of data. Furthermore, the drone method could cover up to three times the area within the same timeframe as the transect spotlight counts.
Drones equipped with thermal cameras have recently become readily available, broadening the possibilities for monitoring wildlife. The European hare (Lepus europaeus) is a nocturnal mammal that is closely monitored in Denmark due to populations declining since the mid-1900s. The limitations of current population-assessment methods, such as, spotlight counts and hunting game statistics, could be overcome by relying on drone surveys with thermal imaging for population counts. The aim of this study was to investigate the use of a DJI Mavic 2 Enterprise Advanced drone with thermal imaging as a tool for monitoring the Danish hare population. Multiple test flights were conducted over agricultural areas in Denmark in spring 2022, testing various flight altitudes, camera settings, and recording methods. The test flights were used to suggest a method for identifying and counting hares. The applied use of this methodology was then evaluated through a case survey that had the aim of identifying and counting hares over an agricultural area of 242 ha. Hares could be detected with thermal imaging at flight altitudes up to 80 m, and it was possible to fly as low as 40 m without observing direct behaviorial changes. Thermal images taken at these altitudes also provided enough detail to differentiate between species, and animal body size proved to be a good species indicator. The case study supported the use of thermal imaging-based drone surveys to identify hares and conduct population counts, thus indicating the suggested methodology as a viable alternative to traditional counting methods.
Drones equipped with thermal cameras have recently become readily available, broadening the possibilities for monitoring wildlife. The European hare (Lepus europaeus) is a nocturnal mammal that is closely monitored in Denmark due to populations declining since the mid-1900s. The limitations of current population assessment methods, such as spotlight counts and hunting game statistics, could be overcome by relying on drone surveys with thermal imaging for population counts. The aim of this study was to investigate the use of a DJI Mavic 2 Enterprise Advanced drone with thermal imaging as a tool for monitoring the Danish hare population. Multiple test flights were conducted over agricultural areas in Denmark in spring 2022, testing various flight altitudes, camera settings, and recording methods. The test flights were used to suggest a method for identifying and counting hare. The applied use of this methodology was then evaluated through a case survey that had the aim of identifying and counting hare over an agricultural area of 242 ha. Hare could be detected with thermal imaging at flight altitudes up to 80 m and it was possible to fly as low as 40 m without observing direct behavior changes. Thermal images taken at these altitudes also provided enough detail to differentiate between species and animal body size proved to be a good species indicator. The case study confirmed the use of thermal imaging based drone surveys to identify hare and conduct population counts, thus, indicating the suggested methodology as a viable alternative to traditional counting methods.