Internet of Things (IoT) is expected to become a driver in an emerging era of interconnected world through the advanced connectivity of smart devices, systems, and services. IoT goes beyond a broad range of Machine-to-Machine (M2M) communication technologies and covers a wide variety of networking protocols. There exist solutions like MQTT or SIP collecting data from sensors, CoAP for constrained devices and networks, or XMPP for interconnecting devices and people. Also there is a plethora of standards and frameworks (OSGi, AllJoyn) bringing closer the paradigm of IoT vision. However, the main constraint of most existing platforms is their limited mutual interoperability. To this end, we provide a comprehensive description of protocols suitable to support the IoT vision. Further, we advocate an alternative approach to already known principles and employ the SIP protocol as a container for M2M data. We provide description of data structures and practical implementation principles of the proposed structures (JSON and Protocol Buffers are discussed in detail) transmitted by SIP as a promising enabler for efficient M2M communication in the IoT world. Our reported findings are based on extensive hands-on experience collected after the development of advanced M2M smart home gateway in cooperation with the operator Telekom Austria Group.
The connected-home ecosystem is currently one of the highly discussed applications of Internet of Things (IoT) paradigm. Usually, this scenario is based on a center-point (so called smart home gateway) which provides the bridging connectivity inside (with the sensors) and outside (with the remote applications) the home. Such gateway is usually a restricted device running on Linux-based operating system (e.g. OpenWRT) including required applications on the top of it. In this paper, we focus on OSGi framework as currently very preferable platform for IoT services in combination with Raspberry Pi embedded hardware board which is also very popular for assuring the gateway features in the smart home. The performance analysis of three selected OSGi frameworks is provided with the aim to critically evaluate the most suitable candidate to become a solid enabler for the connected-home. Since HTTP is the most frequently applied communication protocol for data exchange between smart home gateway and any remote (cloud) application, a particular focus is given to the testing of three implementations of HTTP servers running as OSGi bundles on the gateway. All the obtained results including practical outputs are concluded at the end of our paper.
The paper is aimed at the description of different image interest point detectors and their properties. Particularly, the Harris-Laplace detector, the Fast Hessian detector and the Difference of Gaussian detector are described. These algorithms have already been evaluated with respect to common geometrical transformations such as the rotation, the scale change, etc. This paper describes the testing process and the impact of brightness change and histogram equalization on the repeatability of tested detectors. The evaluation has been performed on two different image databases containing altogether four hundred and eighty nine images. The repeatability has been used for the evaluation of the described interest point detectors. The best results have been achieved for the Fast Hessian detector which has proved to be the fastest and also the most robust. The repeatability of the Fast Hessian detector has reached the value of 65.39% after performing the histogram equalization on the Caltech database.
This paper deals with localization of Temporomandibular Joint Disc (TJD) in Magnetic Resonance Images (MRI). Since the contrast of the TJD is quite low when compared to noise ratio when displayed using MRI, its detection is quite complicated. Therefore the method described in this paper are not not focused the disk itself but detect the most significant objects around TJD, which has usually much higher contrast. For the automatic TJD localization assessment, a training set containing 160 training samples (80 positive and 80 negative) were created and published and several approaches were examined to find the best method. The best results were achieved using support vector machine with Gaussian kernel, which achieved 98.16±2.81% accuracy of detection. The creation of the training models for feature extraction and model evaluation was implemented with RapidMiner tool and the IMMI extension. The models created are published at the IMMI extension homepage and they can also serve as a guide to use of the IMMI extension.
Recent developments in massive machine-type communication (mMTC) scenarios have given rise to never-seen requirements, which triggered the Industry 4.0 revolution. The new scenarios bring even more pressure to comply with the reliability and communication security and enable flawless functionality of the critical infrastructure, e.g., smart grid infrastructure. We discuss typical network grid architecture, communication strategies, and methods for building scalable and high-speed data processing and storage platform. This paper focuses on the data transmissions using the sets of standards IEC 60870-6 (ICCP/TASE.2). The main goal is to introduce the TASE.2 traffic generator and the data collection back-end with the implemented load balancing functionality to understand the limits of current protocols used in the smart grids. To this end, the assessment framework enabling generating and collecting TASE.2 communication with long-term data storage providing high availability and load balancing capabilities was developed. The designed proof-of-concept supports complete cryptographic security and allows users to perform the complex testing and verification of the TASE.2 network nodes configuration. Implemented components were tested in a cloud-based Microsoft Azure environment in four geographically separated locations. The findings from the testing indicate the high performance and scalability of the proposed platform, allowing the proposed generator to be also used for high-speed load testing purposes. The load-balancing performance shows the CPU usage of the load-balancer below 15% while processing 5000 messages per second. This makes it possible to achieve up to a 7-fold improvement of performance resulting in processing up to 35,000 messages per second.
About Me
Brno University of Technology, Faculty of Electrical Engineering and Communications
Brno University of Technology, Faculty of Electrical Engineering and Communications