Peyman Amiri

Mr. Peyman Amiri

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
Peyman AmiriPeyman Amiri
Peyman Amiri
MMMarcus Müller
Marcus Müller
MSMatthew Southgate
Matthew Southgate
TTTHEODOROS THEODORIDIS
THEODOROS THEODORIDIS
Guowu WeiGuowu Wei
Guowu Wei
William HolderbaumWilliam Holderbaum
William Holderbaum
This paper aims to elucidate the state-of-the-art, prevailing priorities, and the focus of the industry, and identify both limitations and potential gaps regarding industrial robots and collaborative robots (cobots). Additionally, it outlines the advantages and disadvantages of cobots compared to traditional industrial robots. Furthermore, three novel factors are introduced in this survey as metrics to evaluate the efficiency and performance of industrial robots and cobots. To achieve these purposes, a statistical analysis and review of commercial articulated industrial robots and cobots are conducted based on their documented specifications, such as maximum payload, weight, reach, repeatability, average maximum angular speed, and degrees of freedom (DOF). Additionally, the statistical distributions of the efficiency factors are investigated to develop a systematic method for robot selection. Finally, specifications exhibiting strong correlations are compared in pairs using regressions to find out trends and relations between them, within each company and across them all. The investigation of the distribution of specifications demonstrates that the focus of the industry and robot makers is mostly on articulated industrial robots and cobots with higher reach, lower payload capacity, lower weight, better repeatability, lower angular speed, and six degrees of freedom. The regressions reveal that the weight of robots increases exponentially as the reach increases, primarily due to the added weight and torque resulting from the extended reach. They also indicate that the angular speed of robots linearly decreases with increasing reach, as robot manufacturers intentionally reduce the angular speed through reductive gearboxes to compensate for the additional torque required as the reach extends. The trends obtained from the regressions explain the reasons behind these interrelationships, the design purpose of robot makers, and the limitations of industrial robots and cobots. Additionally, they help industries predict the dependent specifications of articulated robots based on the specifications they require. Moreover, an accompanying program has been developed and uploaded on to GitHub, taking the required specifications and returning a list of proper and efficient robots sourced from different companies according to the aforementioned selection method.

23 February 2021
Verified
Conference Paper
Closed access
ALAli Akbar Rezaei Lori
Ali Akbar Rezaei Lori
MDMohammad Danesh
Mohammad Danesh
Peyman AmiriPeyman Amiri
Peyman Amiri
SASeyed Yaghoub Ashkoofaraz
Seyed Yaghoub Ashkoofaraz
MAMohammad Ali Azargoon
Mohammad Ali Azargoon
In this article, the aerial load transportation of an unknown slung payload in a windy environment is investigated. First, a full dynamics of the load and quadrotor is derived through the Euler-Lagrange method where the rotational and transitional drag forces are considered. Then, a robust sliding mode control is designed for the transitional movements to cope with both disturbances such as the wind forces and payload swings, and uncertainties such as the length of the cable and the mass of the load. In addition, the PD control method is presented for the quadrotor attitude control. Finally, numerical results show that the appropriate performance of the controllers during the transporting mission despite disturbances. Moreover, the Dryden wind model is utilized to model the real condition of wind velocity.

1 October 2018
Verified
Conference Paper
Closed access
EAEhsan Abbasi
Ehsan Abbasi
MGMostafa Ghayour
Mostafa Ghayour
MDMohammad Danesh
Mohammad Danesh
Peyman AmiriPeyman Amiri
Peyman Amiri
MYMohammad Hussein Yoosefian
Mohammad Hussein Yoosefian
This paper focuses on formation flight control of a multi-quadrotor system. Path tracking of this system is another subject which is in the spot light. When a fault occurs for leader of the group in the leader-follower structure, mission will be failed. In order to avoid this fault, in this paper virtual structure is used instead. The group uses two control loops for flight controlling. Inner loop which is used to control attitudes of agents, combines feedback linearization controller with PD controller. Outer loop which is designed for position control, uses a combination of consensus protocol with PID controller. There is measurement noise in the system, thereby exact values of the states are not available. In order to compensate these negative factor, Kalman filter is used, thus states values are estimated. Finally, effectiveness of the presented protocol is examined through stability analysis and numerical simulation.

4 August 2020
Verified
Conference Paper
Closed access
Peyman AmiriPeyman Amiri
Peyman Amiri
MDMohammad Dayyani
Mohammad Dayyani
ALAli Akbar Rezaei Lori
Ali Akbar Rezaei Lori
ABAmin Boudesh
Amin Boudesh
NSNima Sina
Nima Sina
This paper presents a fuzzy sliding mode controller (FSMC) and an integral sliding mode controller (ISMC) separately to control position of a quadrotor with an uncertain mass in the presence of wind disturbance and compares the operation of these controllers. Euler-Newton method is used to derive the quadrotor dynamic equations that considers the wind effect. The outer loop controller determines the desired angles of the quadrotor which are stabilized by a feedback linearization controller as the inner loop control. Also, the stability proof of FSMC and ISMC is done. Finally, simulation results are utilized to represent the operation of the control approaches and compare their performances.

19 February 2024 in Research Square
Verified
Preprint
Open access
PDF file
Peyman AmiriPeyman Amiri
Peyman Amiri
MMMarcus Müller
Marcus Müller
MSMatthew Southgate
Matthew Southgate
TTTheodoros Theodoridis
Theodoros Theodoridis
GWGuowu Wei
Guowu Wei
WHWilliam Holderbaum
William Holderbaum
This paper undertakes a statistical analysis and review of commercial articulated industrial robots and collaborative robots (cobots) based on their documented specifications such as maximum payload, weight, reach, repeatability, average maximum angular speed and degrees of freedom (DOF). This elucidates the state-of-the-art of these robots, discerns the prevailing priorities and focus of the industry, and identifies both limitations and potential gaps. Industrial robots and cobots are compared and the respective advantages and limitations of industrial cobots are ascertained. Additionally, three novel factors are introduced in this survey as metrics to evaluate the efficiency and performance of industrial robots and cobots. Subsequently, the statistical distributions of these factors are investigated to obtain a systematic method for robot selection. An accompanying program has been developed and uploaded to GitHub which takes the required specifications and returns a list of proper and efficient robots sourced from different companies according to the aforementioned method. Although some robot makers provide some proprietary internal software to assist customers in finding their appropriate robots, the software just considers their own products and does not include those made by other manufacturers. In the end, specifications exhibiting strong correlations are compared in pairs to find out trends and relations between them within each company and across them all. This explains the reason behind these interrelationships, the design purpose of robot makers, and the limitations of industrial robots and cobots. Additionally, this helps industries predict the dependent specifications of articulated robots based on the specifications they require.

11 April 2024 in Journal of Field Robotics
Verified
Journal Article
Open access
VCVerdon Crann
Verdon Crann
Peyman AmiriPeyman Amiri
Peyman Amiri
SKSamuel Knox
Samuel Knox
WCWilliam Crowther
William Crowther
Projections for future air mobility envisage intensely utilized airspace that does not simply scale up from existing systems with centralized air traffic control. This paper considers the implementation and test of a software and hardware framework for decentralized control of aerial vehicles within intensely used airspace. Up to 10 rotary wing vehicles of maximum all up mass of are flown in an outdoor volume with length scale of with GPS and WiFi connectivity. Flight control is implemented using a Pixhawk 4 flight controller running the PX4 firmware with guidance algorithms run on a separate onboard companion computer. Deconfliction is implemented using a simple elastic repulsion model with a guidance update rate of . Traffic structures are constructed from a path of directed waypoints and associated cross sectional geometry. Junctions are implemented when two paths converge into one or when one path diverges into two. Agents engage with structures through execution of flow, merge and swirl velocity rules. Calibration experiments showed that the worst case latency in agents sharing position information was of the order of made up from delays due to finite guidance update rate, WiFi processing and centralized message processing. A choice of vehicle cruise speed of and conflict radius of provided an acceptable compromise between experiment time efficiency (speed) and spatial efficiency (resolution) within the test volume. Results from recirculating junction experiments show that peak deconfliction activity occurs at the junction node, however biased distribution of agents within a corridor means the peak intensity is pushed ahead of the node. Use of meshed helical junction structures significantly reduces the intensity of conflict at the expense of reduced junction time efficiency.